Fluke 732C Configuration guide
Manual Supplement
© 2021 Fluke Corporation. All rights reserved. ®
Manual Title: 732C/734C Operators Supplement Issue: 1
Part Number: Web Only Issue Date: 10/21
Print Date: August 2018 Page Count: 2
Revision/Date:
This supplement contains information necessary to ensure the accuracy of
the above manual.
732C/734C Manual Supplement
10/21
1
Change #1
On page 11, under Selecting Line Voltage and Accessing the Fuse, replace steps 3 and 4 with:
3. Use the screwdriver to pry the fuse holder tab and slide out the fuse holder. The spare fuse
is on the left side of the fuse holder and is not an active part of the protection circuit.
4. Replace the fuse that is on the right side of the fuse holder. See the data on the rear panel
or Figure 2 to check for the correct fuse type and rating.
On page 14, replace the figure with:
Figure 2. Line Power Label and Fuse Location
Manual Supplement 732C/734C
2 10/21
On page 27, replace both figures:
Figure 10. 732C MONITOR/EXT BAT IN Connector Pinout
Figure 11. 732C-7001 BAT OUT Connector Pinout
On page 53, in Table 13, in the WF1 row, change the Qty to 2.
This manual suits for next models
1
Table of contents
Other Fluke Measuring Instrument manuals
Fluke
Fluke 3014-PR User manual
Fluke
Fluke 925 User manual
Fluke
Fluke NORMA 4000 Operators User manual
Fluke
Fluke i430-Flexi-TF-II User manual
Fluke
Fluke 481-DESI User manual
Fluke
Fluke IRR2-BT User manual
Fluke
Fluke 30 Operating and installation instructions
Fluke
Fluke 165X User manual
Fluke
Fluke CableAnalyzer DSP-4000 Series User manual
Fluke
Fluke VR101 User manual
