FLIR EXTECH HDV-WTX2 Dimensions

Product sheet



Model HDV-WTX2

Wireless Articulating Semi-Rigid Probe

For use with the HDV600 Borescope only

Thank you for purchasing this professional camera probe. This sheet covers the warning and

specifications for the probe only. Instructions regarding the usage of the HDV600 Borescope are

provided in the Borescope User Guide.

Note: The camera LEDs become warm when set to maximum intensity

CAUTION: For the Articulating Probe, do not operate the articulation knob with the

probe in a coiled configuration. This will damage the articulation controls!

CAUTION: Always return the articulation and tension knobs to the neutral position

before removing the probe from the inspection area.

The label on the probe provides the Serial Number and Part Number in the format

shown below. Please do not remove this label; otherwise the warranty will be invalid.

Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001

Warnings

•Do not bend to a smaller diameter than 10cm (4”)

•Warranty is invalid if stickers, tags, or labels are removed

Articulating Probe Description

1. Articulation knob

2. Articulation tension knob

3. Articulating camera

4. Light intensity buttons

5. Power button

6. AC Adaptor and extension cable sockets

7. Carrying strap

12 345

www.ponpe.com

contact:

[email protected]

Articulation Setup and Orientation

The articulation direction and orientation may change if the probe is twisted and coiled during use or

when stored. To re-orient the probe:

1. Place the extended probe on a flat surface

2. Set the tension “F” knob to the left or released position.

3. Set the articulation knob to the center position with the R Δand ΔL labels

in the horizontal position.

4. Manually adjust the probe and camera to the zero degree position.

5. Rotate the articulation knob clockwise for a 90° bend.

6. If necessary, manually adjust the probe so that the camera lays flat on the

surface with a 90° articulation

7. Rotate the articulation knob counter-clockwise and confirm proper

orientation.

Charging the Battery

The AC charger port and charging status LED are located in the bottom access compartment.

Connect the charger to the probe and observe the color of the LED. Red indicates the battery is

charging. Green indicates the battery is fully charged.

Note: The rechargeable battery is not user replaceable.

Specifications

Resolution 640 x 480 pixels

Length 2m (6.6’)

Outer diameter (O.D.) 6mm (0.02”)

Battery 3.7V rechargeable Li-Polymer

Focus distance 2 to 6cm (0.79 to 2.36”)

Housing Stainless Steel

Field of View 60º

Number of LEDs 4

Lamp Output 3500 Lux at 20mm

Operating Temperature -20 to 70°C (-4 to 158°F)

Storage Temperature -20 to 70°C (-4 to 158°F)

Warranty 1 year

www.extech.com

Revision 2.1 2/12

RΔ ΔL

www.ponpe.com

contact:

[email protected]

Table of contents

Other FLIR Measuring Instrument manuals

FLIR

FLIR MR160 User manual

FLIR

FLIR CM174 C User manual

FLIR

FLIR EXTECH INSTRUMENTS PQ34-12 User manual

FLIR

FLIR CM174 User manual

FLIR

FLIR TA72 User manual

FLIR

FLIR VS80A4-60-2RM User manual

FLIR

FLIR identiFINDER R300 User manual

FLIR

FLIR CM275 User manual

FLIR

FLIR Extech Instruments RH520A-240 User manual

FLIR

FLIR MR59 User manual

FLIR

FLIR CM42 User manual

FLIR

FLIR TA72 User manual

FLIR

FLIR VS80C10-25RM User manual

FLIR

FLIR Extech Instruments MA410 User manual

FLIR

FLIR Extech Instruments EX840 User manual

FLIR

FLIR EXTECH INSTRUMENTS PQ3450 User manual

FLIR

FLIR Extech Instruments MA150 User manual

FLIR

FLIR CM55 User manual

FLIR

FLIR Extech Instruments Oyster-10 User manual

FLIR

FLIR identiFINDER R200 User manual

FLIR

FLIR Extech Instruments PQ34-2 User manual

FLIR

FLIR Extech Instruments RH520A User manual

FLIR

FLIR EM54 User manual

FLIR

FLIR E75 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual