Fiso Nortech EasyTest II User manual

EasyTest II User Guide

EasyTest II

(E-TEST-II)

User Guide

MAN-00119 R1

EasyTest II User Guide

iii

transmitted in any form, be it electronically, mechanically, or by any other means such as photocopying,

recording, or otherwise, without the express written consent from FISO Technologies Inc. (FISO).

Information provided by FISO is believed to be accurate and reliable. However, no responsibility is

assumed by FISO for its use or for any infringements of patents or other rights of third parties that may

result from its use. No license is granted by implication or otherwise under any patent rights of FISO.

FISO’s Commerce and Government Entities (CAGE) code under the North Atlantic Treaty Organization

(NATO) is L0294.

The information contained in this publication is subject to change without notice.

Words that FISO considers trademarks have been identified as such. However, neither the presence nor

absence of such identification affects the legal status of any trademark.

Units of measurement in this document conform to SI standards and practices

Fiso Technologies Inc.

500, Ave St-Jean-Baptiste, suite 195

Québec (Québec)

G2E 5R9, Canada

Tel : +1 418 688 8065

Fax : +1 418 688 8067

[email protected]

www.fiso.com

 EasyTest II User Guide 
 
 
 
 iv
 
1Table of Content 
 
2Product Certification...................................................................................................................1 
 CE Information............................................................................................................................... 1 
 Independent Laboratory Testing................................................................................................... 1 
 Declaration of conformity ............................................................................................................. 2 
3Safety Information......................................................................................................................3 
 Safety Conventions........................................................................................................................ 3 
 Safety Information......................................................................................................................... 4 
 Unpacking and Inspection............................................................................................................. 5 
 Handling Optical Cable .................................................................................................................. 6 
 Cleaning Fiber Optic Connectors................................................................................................... 7 
4Hardware Configuration............................................................................................................10 
 Introducing the EasyTest II.......................................................................................................... 10 
 Overview...................................................................................................................................... 11 
 Powering the EasyTest II ............................................................................................................. 13 
 Optical Connector........................................................................................................................ 14 
 LCD Display.................................................................................................................................. 16 
 LED Indicators.............................................................................................................................. 16 
 Informations................................................................................................................................ 16 
 Language ..................................................................................................................................... 17 
 USB Communication Port............................................................................................................ 17 
 Physical dimensions..................................................................................................................... 18 
 Weight......................................................................................................................................... 18 
5Nortech Client Software............................................................................................................ 19 
6Troubleshooting........................................................................................................................ 20 
 Solving Common Problems ......................................................................................................... 20 
 Diagnostics values ....................................................................................................................... 21 
7Spare parts ............................................................................................................................... 22 
8Warranty and Service................................................................................................................23 
Annexe A LOG Sheet.........................................................................................................................25 
 
 

2Product Certification

CE Information

Electronic test equipment is subject to the EMC Directive in the European

Union. The EN61326 standard prescribes both emission and immunity

requirements for laboratory, measurement, and control equipment.

This unit has been tested and found to comply with the limits for a Class A

digital device. Please refer to the Declaration of Conformity.

Independent Laboratory Testing

This unit has undergone extensive testing according to the European Union Directive and Standards.

Tests were performed externally, at an independent, accredited laboratory. This guarantees the unerring

objectivity and authoritative compliance of all test results.

Declaration of conformity

FISO Technologies Inc., located at 500, Saint-Jean-Baptiste Ave., Suite 195, Quebec, QC, Canada G2E 5R9

Product description: Fiber optic thermometer

Model number(s): EasyTest II

Product category: Electrical equipment for measurement, control and laboratory use.

Complies with the essential requirements of the following applicable European Directive:

2014/30/EU Electromagnetic Compatibility (EMC) Directive,

2011/65/EU Restriction of the use of certain Hazardous Substances (RoHS) Directive

Conformity is assessed in accordance to the following standards:

EMC Standards:

EN61326-1 : (2013)

Emissions/Immunity requirements for laboratory Equipment

CISPR 11: (2015) A1(2016)

Conducted Emissions

Group 1, class A

CISPR 11: (2015) A1(2016)

Radiated emission

Group 1, class A

IEC 61000-4-2 : (2008)

Electrostatic discharge immunity

Contact: ±4kV Air: ±2kV, ±4kV, ±8kV

IEC 61000-4-3 : (2006)

A1(2007) A2(2010)

Radiated electromagnetic field immunity

80-1000MHz: 3V/m

1.4-2GHz: 3V/m

2-2.7GHz: 1V/m

IEC 61000-4-4 : (2012)

Electrical fast transient immunity

Power: ±1kV / 5kHz I/O Ports: N/A

Communication Ports: N/A

IEC 61000-4-5 : (2014)

Surge immunity

Power: ±1kV L-PE / ±0.5kV L-L I/O Ports:

N/A Communication Ports: N/A

IEC 61000-4-6 : (2013)

Immunity to Conducted Disturbances,

Induced by Radio-Frequency Fields

Power: 3V I/O Ports: N/A Communication

Ports: N/A

IEC 61000-4-8 : (2009)

Power Frequency Magnetic Field Immunity

Continuous Field: 3A/m / 50Hz & 60Hz

IEC61000-4-11 : (2004)

Voltage Dips, Short Interruptions and Voltage

Variation Immunity on AC Input

Voltage dips: 0%Un during half cycle 0%Un

during 1 cycle 70%Un during 25 cycles (at

50Hz) 70%Un during 30 cycles (at 60Hz)

Short interruptions: 0%Un during 250

cycles(at 50Hz) 0%Un during 300 cycles (at

60Hz)

Environmental Affairs:

EN50581 : 2012

Articles manufactured on or after the Date of Issue of this declaration of Conformity do not

contain any of the restricted substances in concentration/applications not permitted by the

RoHS Directive

Supplementary information:

Conducted Emissions FCC part 15 (2018) subpart B

Class A 150kHz-30MHz

Radiated Emissions FCC part 15 (2018) subpart B

Class A 30MHz-2GHz

Conducted Emissions ICES-003 (2016)

Class A 150kHz-30MHz

Radiated Emissions ICES-003 (2016)

Class A 30MHz-2GHz

3Safety Information

Safety Conventions

Before using the product described in this guide, you should understand the following conventions:

DANGER

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury. Do not proceed unless

you understand and meet the required conditions.

WARNING

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury. Do not proceed unless

you understand and meet the required conditions.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,

may result in component damage. Do not proceed unless you

understand and meet the required conditions.

IMPORTANT

Refers to information about this product you should not

overlook.

Safety Information

The level of radiation is below the level known to cause eye injury through accidental short-term

exposure. However, avoid prolonged exposure to light emitted from the fiber and do not stare directly

at a light beam, visible or not.

The following safety instructions must be observed whenever the EasyTest II is operated. Failure to

comply with any of these instructions or with any precaution or warning contained in the Fiber Optic

Thermometer user’s guide is in direct violation of the standards of design, manufacture and intended

uses of the EasyTest II. FISO assumes no liability for the customer failure to comply with these safety

requirements.

THIS PRODUCT IS NOT DESIGNED FOR USE IN LIFE SUPPORT OR CRITICAL APPLICATIONS.

In no case will FISO be liable to the buyer, or to any third parties, for any consequential damage or

indirect damage which is caused by product failure, malfunction, or any other problem.

When using any electrical appliance, basic safety precautions should be followed, including the

following:

You should only use the power supply that came with your EasyTest II and verify that the voltage

specifications indicated on the power supply are compatible with the AC voltage and frequency delivered

at the power outlet.

Do not operate in wet/damp conditions.

Do not expose to outdoor conditions.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry.

Avoid excessive physical shock or vibration

Do not expose to temperature higher than 60 degC

WARNING

This equipment must be used as specified or the protection provided by the equipment may

be compromised. You must use this product in a normal mode and should not deviate from

the written instructions provided.

Unpacking and Inspection

The EasyTest II Tester is shipped inside a carton designed to give maximum protection during shipment.

CAUTION

If the outside of the shipping carton is damaged, notify your shipping department immediately.

Your shipping department may want to notify the carrier.

Carefully remove the carring case from the carton and open-it, identify all of the components listed

below.

Contact FISO or your local representative if any of the components are missing.

We recommend you save the shipping carton for future storage or transportation.

The EasyTest II toolbox includes the following components:

1X EasyTest II unit

1X EasyClean, Optical Connector Cleaner (attached to the EasyTest II unit)

1X CFO-ET, a short optical extension / optical port saver (attached to the EasyTest II unit)

1X USB interface cable

1X Power Adapter

1X EasyCheck, a small validation probe

1X ST-ST mating

1X Calibration Certificate

1X Carrying case

Handling Optical Cable

CAUTION

The core of any fiber optic cable is glass. For this reason it should be handled with care and

should not be viewed like a standard conventional electrical cable. If it is pinched, twisted,

over bent or crushed, the glass core will break and the light attenuation will occur at this point.

Fiber optic sensors are pretty robust but…

Avoid sharp bend

Avoid kinking, twisting

Avoid putting any tension on the cable

Avoid dropping connector on hard surfaces

Like your car Windshield or your glasses, the optical connector must stay clean to gives good results.

Always keep the protective cap on, to protect them when they are not connected

Clean both connectors each time you connect them, because a small particle of dust on one connector

could scratch both connectors.

Here are typical inspection picture of optical connector made with a Fiber inspection probe

Before Cleaning

First click cleaning

Second Click cleaning

This manual suits for next models

Table of contents

Other Fiso Measuring Instrument manuals

Fiso

Fiso EasyGrid User manual

Fiso

Fiso Nortech EasyGrid LT User manual

Fiso

Fiso EasyGrid User manual

Fiso

Fiso MAN-00112 R 2.0 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual