FE MSR128LUS User manual

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

PC RECORDER

FOR 53U MULTI POWER MONITOR

Software model: MSR128LUS, MSR128LUV

Users Manual

Fuji Electric France S.A.S.

46, Rue Georges Besse - Z I du Brézet - 63 039 Clermont-Ferrand cedex 2 FRANCE

France : Tél. 04 73 98 26 98 - Fax 04 73 98 26 99 - International : Tél. (33) 4 7398 2698 - Fax. (33) 4 7398 2699

E-mail : sales.dpt@fujielectric.fr – WEB : www.fujielectric.fr

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

Contents

1. GENERAL DESCRIPTIONS ........................................................................ 5

1.1 PRECAUTIONS TO USE THE MSR128LU ON YOUR PC ......................................................... 5

1.2 FEATURES OF THE MSR128LU ................................................................................................ 6

1.3 PC REQUIREMENTS.................................................................................................................. 7

2HARDWARE SETUP.................................................................................... 8

2.1 CONFIGURING THE 53U ........................................................................................................... 8

2.2 CONNECTING TO THE PC.........................................................................................................9

2.2.1 MODBUS RTU .................................................................................................................9

2.2.2 ETHERNET MODBUS TCP/IP....................................................................................... 10

3INSTALLING THE MSR128LU .................................................................. 11

3.1 INSTALLING THE MSR128LU FROM THE DOWNLOADED ARCHIVE....................................11

3.2 UNINSTALLING THE MSR128LU ..............................................................................................11

3.3 STARTING THE MSR128LU ......................................................................................................11

4SETTING UP THE MSR128LU .................................................................. 12

4.1 BASIC SETTING ....................................................................................................................... 12

4.1.1 OPERATING MODE....................................................................................................... 12

4.1.2 GRAPH DIRECTION...................................................................................................... 13

4.1.3 GRAPH MODE............................................................................................................... 13

4.1.4 STORAGE PERIOD ....................................................................................................... 13

4.1.5 COMMUNICATION PORT.............................................................................................. 14

4.2 NODE SETTING........................................................................................................................ 15

4.3 PEN SETTING........................................................................................................................... 16

4.3.1 COMMON INFORMATION............................................................................................. 16

4.3.2 DETAIL INFORMATION (ANALOG) ............................................................................... 17

4.3.3 DETAIL INFORMATION (DISCRETE)............................................................................ 19

4.3.4 OTHER CONTROLS...................................................................................................... 19

4.4 STORE SETTING ...................................................................................................................... 20

4.4.1 STORING CYCLE .......................................................................................................... 20

4.4.2 NORMAL MODE ............................................................................................................ 20

4.4.3 REMOTE TRIGGER....................................................................................................... 21

4.4.4 EVENT RECORDING .................................................................................................... 21

4.4.5 AUTO MODE..................................................................................................................22

4.4.6. FILE VOLUME................................................................................................................ 22

5. RECORD .................................................................................................... 23

5.1 MENU BAR................................................................................................................................ 23

5.2 ELEMENTS ON THE RECORD VIEW ...................................................................................... 24

6. RETRIEVE.................................................................................................. 26

6.1 MENU BAR................................................................................................................................ 26

6.2 ELEMENTS ON THE RETRIEVE VIEW.................................................................................... 26

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

7. ALARM HISTORY ...................................................................................... 29

8. FILE ............................................................................................................ 30

8.1 DATA FILE & FOLDER .............................................................................................................. 30

8.2 PARAMETER FILE .................................................................................................................... 30

8.3 MSR128LU FILE TYPES ........................................................................................................... 31

8.4 CSV DATA FORMAT.................................................................................................................. 31

Appendix A: Software version information.................................................. 33

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

INTRODUCTION

Thank you for choosing M-System’s PC Recorder. This instruction manual describes functions of PC Recorder for

the 53U Multi Power Monitor, its PC requirements, input module, and how to operate the MSR128LUS and

MSR128LUV (hereunder referred to as ‘MSR128LU’) software programs.

The MSR128LU is aWindows-PC-based software program dedicated to be used with the 53U Multi Power Monitor,

to monitor and record its measured data. To program the 53U’s configurations, you need to access its program via

the front keys, or to use the dedicated PC configuration software, model 53UCFG. Other hardware modules cannot

be used with the MSR128LU.

The data used for the recorder is saved in CSV format allowing easy export to other Windows programs (e.g.

Microsoft Excel).

In order to ensure maximum performance of the PC Recorder, we recommend that you carefully examine the envi-

ronments of the PC and other connected devices. Please remember that the overall reliability of the MSR128LU as

a recording device depends upon that of the PC including its OS.

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

1. GENERAL DESCRIPTIONS

1.1 PRECAUTIONS TO USE THE MSR128LU ON YOUR PC

1. The MSR128LU is designed as package application, usable on PC running Windows 2000 and Windows XP.

Consider the fact that the MSR128LU constantly reads input signal and plots entire chart screen at its fastest

storing cycle of 0.5 sec. when you choose the CPU and graphic capabilities of PC.

2. DO NOT use another application program while the MSR128LU is running.

3. Remember that the overall reliability of the MSR128LU as a recording device depends upon that of the PC

including its OS.

4. The MSR128LU is designed to use in a single window on a single PC, not for use in multiple windows or to be

shared on LAN.

5. Disable the power saving mode: Select on the PC’s desktop ‘Properties – Screen Saver – Power – Power

Schemes’and set‘Never’to all items. With laptops, disable any key operations to initiate an automatic shutdown

other than the power switch. Disable also the system stand-by mode or any other power saving features.

6. Disable animating screen savers in order to avoid extra load to the PC when running the MSR128LU.

7. It is recommended not to copy more than necessary shortcuts or exe. files on the desktop. We recommend to

delete exe. files related to web site contents in order to avoid any disturbance in plotting.

8. Storing cycles of 500 msec. or slower are usable. High speed mode (50 msec. storing cycle) is unavailable.

9. Use an independent LAN for the MSR128LU. Sharing the network with other systems may cause an instability

or interference on both systems.

10.If you intend to use the PC Recorder in the following environments or conditions, redundant and/or failsafe

system designs should be used to ensure the proper degree of reliability and safety.

–Environments or conditions which are not defined in this manual

–Nuclear power control devices, railway control devices, aircraft control devices, transportation vehicles, fuel

control equipment, medical equipment, recreational equipment, safety equipment, and other critical equip-

ment for which safety must be secured according to relevant laws.

–Those devices which inherently require extremely high level of safety and reliability.

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

1.2 FEATURES OF THE MSR128LU

On the Record view, the MSR128LU reads and plots input signals on the screen, and saves data as record files.

Additionally, it compares the signals with the preset alarm conditions and accordingly outputs a contact signal to the

predetermined output point. Pen configurations including alarm setting can be modified on this view.

On the Retrieve view, the MSR128LU searches and shows historical recorded data files. The MSR128LU continues

sampling even while the main recording window is inactive.

The data files are saved in CSV format, which can be directly exported to general-purpose spreadsheet programs

such as Microsoft EXCEL. They can be stored also in removable storage media for later use, for example, using the

Retrieve view or Microsoft Excel program on another PC.

In addition to the functions of conventional recorders, those of data logging is incorporated all-in-one into the

MSR128LU, thanks to extensive, analytical, communicative and administrative capabilities of a PC.

It can be called as “chartless” recorder.

Figure 1.2 shows a map of various options available on the menu bar and control panel in the MSR128LU program.

Figure 1.2: MSR128LU options map.

Setting Operation mode

Graph direction

Graph mode

Communication port

Basic setting

Node setting

Storage period

Digital Hide

Digital

Alarm History

Reload

Search condition

Clear

Retrieve Divide

Date time

Current

Basic information

Detail

Store setting

Common information

Detail information

Pen setting

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

1.3 PC REQUIREMENTS

PC: IBM PC/AT or compatible

RS-232C port may have predefined use for certain types of PC, which could require modifica-

tions in driver software or system configuration.

Operating system: Windows 2000 or Windows XP SP1, SP2

Screen area: MSR128LUS 800 by 600 pixels

MSR128LUV 640 by 480 pixels

Display colors: 65000 colors or more (16 bit high color)

CPU: Pentium III 800 MHz or higher (Use the secondary cache with Celeron CPU)

Memory: 128 MB recommended for Windows 2000, 256 MB for Windows XP

Input device: 53U

Protocol coverter: models 72EM-M4, 72EM2-M4

Hard disk area: Using an internal drive is recommended. Performance of the MSR128LU may be impaired

with using external one, connected via SCSI for example.

The hard disk must have a enough space, and removable storage media must be available for

data transfer.

Remark: The MSR128LU may not be able to store every bit of data depending upon the PC’s performance levels.

These missing data will be substituted by the last stored data.

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

2HARDWARE SETUP

2.1 CONFIGURING THE 53U

NODE NUMBER SETTING

Each 53U module connected to the MSR128LU must have an unique node number (1 – 1F, up to 31 nodes).

MODBUS SETTING

Confirm the baud rate, parity and stop bit setting on the 53U module. All these settings must be equal to the factory

default setting in order to communicate with the MSR128LU.

Refer to the figure below or the operating manual of the 53U to set the node number and other Modbus properties.

Once a new node number is set, the power supply to the device must be turned off and on to implement it.

Figure 2.1: Modbus node and property setting.

Press ≥2 sec.

Enter Passcode

0000 thr. 9999 (0000)

■KEY FUNCTIONS

Device information

(DEV INFO)

E PRG

: Go up one level in the chart

ESCAPE

: Select

ENTER

: Move between menu items

Reset count

(RESET)

Switch tariff

(TARIFF)

Reboot device

(REBOOT)

Change Passcode

(PASSCODE)

Change Setting

(SETTINGS)

Bargraph indication

setting (BAR)

Input Setting

(INPUT)

Modbus setting

(MODBUS) Modbus address

(ADDRESS) 1 thr. 247 (1)

Baud rate

(BAUDRATE) 1200 bps

2400 bps

4800 bps

9600 bps

19200 bps

38400 bps (*)

Parity type

(PARITY) NONE

ODD (*)

EVEN

Stop bit length

(STOP BIT) 1 (*)

Node Setting

Modbus Setting

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

2.2 CONNECTING TO THE PC

The 53U modules are connected to the PC either via a COM port or via a LAN port. Using both ports at once is Not

Possible.

COM Port: The MSR128LU communicates with the 53U using Modbus RTU Protocol via RS-232C as physi-

cal layer. Insert Model R2K-1 RS-232C/RS-485 Converter close to the PC.

LAN Port: TheMSR128LUcommunicateswiththe 53U using ModbusTCP/IPProtocolviaEthernetas physical

layer. The 53U, Modbus RTU modules are interfaced via Model 72EM(2)-M4 Communication

Adaptor.

2.2.1 MODBUS RTU

Asshownin Figure2.2.1a, the53U module isconnected toPC’sCOM port(COM1 throughCOM5) via theRS-232C/

RS-485 Converter (model: R2K-1).

Connect the 53U to the R2K-1 with a RS-485 twisted pair cable. Connect the R2K-1 to the PC with a straight RS-

232C cable with 9-pin D-sub connectors.

When more than one 53U module are to be monitored, connect these modules with RS-485 twisted pair cables.

Figure 2.2.1a: System configuration example, Modbus RTU.

Detail of Modbus wire configuration is as shown in Figure 2.2.1b.

Figure 2.2.1b: Modbus wiring detail with the R2K-1.

RS-485 (Modbus RTU)

Multi Power Monitor

(model: 53U)

RS-232C

RS-232C/RS-485

Converter

(model: R2K-1 or LK1)

Max. 31 nodes

R2K-1

53U

CONNECTOR

RS-232C

RS-485

*1. Internal terminating resistor is used when the device is at the end of a transmission line.

*2. Install shield cables to all sections and ground them at single point.

RS-485

MSR128LUS/MSR128LUV USERS MANUAL EM-7375 Rev.2

2.2.2 ETHERNET MODBUS TCP/IP

Figure 2.2.1a shows a system configuration example via Ethernet using Model 72EM(2)-M4 Ethernet/RS-485 Com-

munication Adaptor. Only one (1) 72EM(2)-M4 can be connected to one PC.

If the 72EM(2)-M4 is directly connected to the PC (Not via a switch/hub), use a ‘cross’ type Ethernet cable.

Figure 2.2.2a: System configuration example, ModbusTCP/IP.

Detail of Modbus wire configuration is as shown in Figure 2.2.2b.

Figure 2.2.2b: Modbus wiring detail with the 72EM(2)-M4.

RS-485 (Modbus RTU)

Multi Power Monitor

(model: 53U)

Ethernet

Communication Adaptor

(model: 72EM-M4 or 72EM2-M4)

ETHERNET RUN

SEND

FIELD

CNFG

Max. 31 nodes

72EM-M4

72EM2-M4

53U

CONNECTOR

Ethernet

RS-485

*1. Internal terminating resistor is used when the device is at the end of a transmission line.

*2. Install shield cables to all sections and ground them at single point.

*3. When the 72EM(2) unit is located at an end of transmission line via twisted-pair cable (= when there is no cross wiring),

close across the terminal 2 – 11 with the terminating resistor attached to the product.

Remove the resistor from those located between the end points.

RS-485

–

This manual suits for next models

Table of contents

Other FE Measuring Instrument manuals

FE NRF50 User manual

FE PHW User manual

FE FSH User manual

FE ZAJ User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual