EZCast CatchU B1 User manual
EZCast CatchU B1
Quick Start Guide
v1.0
Product information is subject to change without prior notice.
What’s In The Box
Installation
Product
Type-C to USB HDMI to HDMI Quick Start Guide
QSG
Scan the QRCode below to visit full-version user manual on our website.
Product Overview
Record button
LED light
Status signals
Mode button
(Any format/ 720p MP4)
EAR
MIC/Reset
Storage/ Phone
(H.264 format only)
UVC/PC HDMI IN HDMI OUT
Power
Note:
1. For details, please refer to the full user manual via QRCode on the previous page.
2. UVC/PC and Storage are able to record simultaneously only as H.264 format.
3. The MODE button does not function while recording.
4. When the LED light is flashing in red, it means the setup or configurations are incorrect:
- No HDMI input signal
- No USB Storage inserted on Storage/ Phone port
- Incorrect System Format for USB Storage
- Incorrect Encoder Format for USB Storage
- The capacity of USB Storage is full.
5. H.264 format is not supported for some Instant Message Applications like Facetime etc,.
LED light:
- Multi-color: Ready to record
- Stable red light: Recording to external storage
- Flash in red: Warning message
- Light off: Power off
Status signals:
- HDMI: HDMI signal detected or not
- Power: Power ON/ OFF
- Mode: Stable light ON/ OFF for Smooth Mode/
Flash 2 times for MIC mix mode ON
Flash 4 times for MIC mix mode OFF
Connection for HDMI input
Connection for Phone input
record
stream
Other manuals for CatchU B1
1
Other EZCast Measuring Instrument manuals
