Extech Instruments BR250 User manual

User's Guide

Video Borescope

Models BR200 and BR250

BR200-BR250 V4.3 8/09

Introduction

Congratulations on your purchase of this Extech BR200 (17mm camera head) or BR250

(9mm camera head) Video Borescope. This instrument was designed for use as a remote

inspection device. It can be used to peer into tight spots and then supply real-time video

and images that can be recorded. Typical applications include HVAC inspection,

automotive inspection, cable routing, and automotive/boat/aircraft inspection. This meter is

shipped fully tested and, with proper use, will provide years of reliable service.

Features

•3.5 '' TFT-LCD palm LCD monitor with high resolution

•The image head and the cable are water resistant when the unit is fully assembled

(the monitor and the camera are not water resistant)

•Wireless and hard-wired functionality

•The monitor records video and images

•SD card capacity: 16G

Supplied Equipment

1. Camera

2. LCD Monitor

3. Monitor Adaptor

4. Adaptor cable

5. Accessory Magnet / Hook / Mirror（BR200）

6. Magnetic mount

7. Flex cable and camera head

8. Software

9. 4 AA Batteries

789

456

12 3

BR200-BR250 V4.3 8/09

Description

1 Signal output

2 Power Indicator

3 Power On/Off, Dimmer

4 Flexible tube

5 Camera head and LED’s

6 OK

7 Up, video or jpg

8 Menu

9 Down. Channel select (4)

10 Power On/Off

11 Power Indicator

12 USB Socket

13 Video output

14 SD card socket

15 Power supply socket

16 Reset

17 Signal input

Warranty

EXTECH INSTRUMENTS CORPORATION (A FLIR COMPANY) warrants this instrument

to be free of defects in parts and workmanship for one year from date of shipment (a six

month limited warranty applies to sensors and cables). If it should become necessary to

return the instrument for service during or beyond the warranty period, contact the

Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our

website www.extech.com for contact information. A Return Authorization (RA) number

must be issued before any product is returned to Extech. The sender is responsible for

shipping charges, freight, insurance and proper packaging to prevent damage in transit.

This warranty does not apply to defects resulting from action of the user such as misuse,

improper wiring, operation outside of specification, improper maintenance or repair, or

unauthorized modification. Extech specifically disclaims any implied warranties or

merchantability or fitness for a specific purpose and will not be liable for any direct, indirect,

incidental or consequential damages. Extech's total liability is limited to repair or

replacement of the product. The warranty set forth above is inclusive and no other

warranty, whether written or oral, is expressed or implied.

BR200-BR250 V4.3 8/09

Installation

Install the batteries into the instrument body, charge the monitor battery, connect the camera

and flexible tube to the body, insert the micro SD card. Install any accessory as needed.

Battery Installation

Connect Monitor Power

The monitor has a rechargeable battery. Plug in the AC adaptor and connect the cable to

the DC5V socket on the monitor. The power indicator will light in red (or the battery

capacity icon on LCD of monitor will blink, indicating that it is charging - and will turn off

after a full charge)

Connect the camera and flexible tube

Connect the camera tube to the instrument body; ensure that the keyed ends are properly

aligned. Once aligned, tighten the knurled knob to hold the connection firmly in place.

BR200-BR250 V4.3 8/09

Inserting the micro SD card

Insert card with arrow pointing toward slot. Gently apply pressure until card locks into

the spring loaded slot. To remove from unit, gently push the card inward and then

release to eject it from the card slot.

Installing the accessory tools （BR200）

The included accessories (mirror, hook and magnet) all attach to the camera in the same

manner. Refer to the diagrams below:

Attaching the Monitor to the instrument body

BR200-BR250 V4.3 8/09

Connect the USB Cable

Use the USB cable to connect the monitor to a PC. The USB online icon will appear

on the PC. Open My Computer on the PC, and locate the Mobile Disk. The

Mobile disk can be used and accessed in the same manner as any external hard

drive.

Video Output

Insert the video cable into the VIDEO OUT socket on the monitor. Insert the other

end of the cable into the VIDEO IN jack of a TV or other monitor. The LCD Monitor

will output a high quality video image.

Installing the Magnetic bracket

The magnetic bracket slides onto the rear of the monitor for convenient placement

and viewing.

BR200-BR250 V4.3 8/09

Operation

Basic Operation

1. Turn the ON/OFF dial switch to power the camera. The power indicator will switch

on. The switch then acts as a dimmer for the two LEDs on the imager head of the

camera.

2. Press and hold the monitor power switch for at least 2 seconds and the power

indicator will illuminate green and a Welcome screen will appear.

3. Before attaching the monitor to the instrument body, press the down arrow button to

select channel 4. The real time image will appear on the display LCD monitor.

Note. If the picture does not properly syncronize or has poor color, check the

Video System Settings and change from “NTSC” to ‘PAL” or vice versa. This

should fix the condition..

4. Use the up arrow to select video or photo mode.

5. Turn the ON/OFF dial to adjust the LED light intensity as desired.

6. The tube can be easily maneuvered into position. The tube can be bent into the

shape of the area to be examined.

7. Use the supplied accessories to help retrieve small items.

Taking a Picture

In Photo mode, press OK to take a picture. The photo will automatically save to

the SD card.

Recording a Video

In Real-Time Monitoring (video) mode, press OK to begin recording; refer to the

following diagram for display icon definitions:

1. Battery capacity

2. Function icon (video or photo)

3. Recording in progress

4. Channel

5. Date

6. Time Stamp

7. REC Time remaining

8. SD card

CH 4

2009/07/28

11:12:31

[0]

12 34

567

BR200-BR250 V4.3 8/09

Viewing a Photo or Video

1. In the Real-Time Monitoring mode, press to

display a list of dated playback folders

2. Use the ▼▲keys to select the desired folder.

3. Press OK to open the selected folder and view

a list of photo or video files.

4. Files are listed by time followed by (VID”) for

photos or (VID) for videos

5. Use the ▼▲keys to select a file.

6. Press OK to display the selected photo or

video.

For video files:

Press OK to pause while playing.

Press again to resume.

▲Fast Forwards the video

▼Rewinds the video

Press to stop video

7. Press to return to menu.

8. Press again to exit.

Note: Video automatically saves to file every 30 minutes. When the SD card is filled to

capacity, the SD card icon changes to ‘F’. No video will be recorded if the SD card is not

inserted in the slot.

Delete a Single Video Or Photo

1. In the Real-Time Monitoring mode, press to

display a list of dated playback folders

2. Use the ▼▲keys to select the desired folder.

3. Press OK to open the selected folder and view

a list of photo or video files.

4. Files are listed by time followed by (VID”) for

photos or (VID) for videos

5. Use the ▼▲keys to select a file.

6. Press and HOLD the button, the display will

show ‘DELETE CURRENT FILE?’

7. Use the arrow keys to select YES or NO

8. Press OK to accept selection.

9. Press twice to exit the Delete screen.

Delete a File Folder

To delete a folder, use the same instructions for deleting a single video or photo. The

only additional concern is that if a folder is not empty it cannot be deleted. Delete all of

the files in a folder before deleting the folder. If the user attempts to delete a folder that is

not empty, the following message will appear: FOLDER NOT EMPTY

13:00:24 VID”

2009-06-10 0001/0004

13:00:24 VID”

13:00:24 VID

13:00:24 VID”

2009-06-10 0001/0004

13:00:24 VID”

13:00:24 VID

BR200-BR250 V4.3 8/09

Video Display on a PC

Several methods are available to playback or to copy video files on a PC. When

connected, the files will become available as new drives on the PC.

1. SD card adaptor: Insert the mini SD card into the SD adaptor and then insert the

adaptor into the PC SD slot (if available)

2. USB adaptor: Insert the mini SD card into a USB adaptor and plug into a USB port.

3. USB cable. Connect the USB cable from the camera to the PC.

Note: If the *.avi video files will not play on any installed media software, a software plug-

in is available on the supplied CD which will allow compatibility with Media Player.

Settings Mode

Press and hold for at least two seconds to enter the Settings Mode.

Language Settings

1. In Settings Mode, use the arrow keys to select SYSTEM SETTING (green icon).

2. Press OK to call up the SYSTEM icon list

3. Use the arrow keys to highlight the Language icon (globe)

4. Press OK and the Language icon list will appear (flags)

5. Use the arrow keys to highlight the desired language

6. Press OK to select the highlighted language and exit

Video System Settings

1. In Settings Mode, use the arrow keys to select SYSTEM SETTING (green icon).

2. Press OK to call up the SYSTEM icon list

3. Use the arrow keys to highlight the Video System icon (yellow)

4. Press OK and the Video format selections will appear (NTSC, PAL)

5. Use the arrow keys to highlight the desired format

6. Press OK to select the highlighted format and exit

Format and Erase Media

1. In Settings Mode, use the arrow keys to select SYSTEM SETTING (green icon).

2. Press OK to call up the SYSTEM icon list

3. Use the arrow keys to highlight the FORMAT icon (blue)

4. Press OK and the FORMAT selection screen will appear (YES, NO)

5. Use the arrow keys to highlight the desired response

6. Press OK to accept the selection and exit

Restoring Factory Default Settings

1. In Settings Mode, use the arrow keys to select SYSTEM SETTING (green icon).

2. Press OK to call up the SYSTEM icon list

3. Use the arrow keys to highlight the DEFAULT icon (red)

4. Press OK and the DEFAULT selection screen will appear (YES, NO)

5. Use the arrow keys to highlight the desired response

6. Press OK to accept the selection and exit

BR200-BR250 V4.3 8/09

View Version

1. In Settings Mode, use the arrow keys to select SYSTEM SETTING (green icon).

2. Press OK to call up the SYSTEM icon list

3. Use the arrow keys to highlight the VERSION icon (green)

4. Press OK to view the version

5. Press OK again to exit

Frame Rate Setting

1. In Settings Mode, use the arrow keys to select RECORDER SETTING (red icon).

2. Press OK to call up the RECORDER options

3. Use the arrow keys to highlight the FPS (frames per second) icon

4. Press OK to open the FPS parameter

5. Use the arrows to select the frame rate: 10, 15, 20, 25, or 30

6. Press OK to confirm

Time Stamp ON OFF Setting

1. In Settings Mode, use the arrow keys to select RECORDER SETTING (red icon).

2. Press OK to call up the RECORDER options

3. Use the arrow keys to highlight the Time Stamp icon (purple)

4. Press OK to open the parameter

5. Use the arrows to select ON or OFF

6. Press OK to confirm

Date/Time Setting

1. In Settings Mode, use the arrow keys to select DATE-TIME SETTING (yellow icon).

2. Press OK to call up Date and Time Settings window

3. Use OK to tab through the fields

4. Use the arrow keys to change a field setting

5. Press the button to exit

Safety

•Do not expose instrument to moisture

•Shut off the instrument when not in use

•Remove the batteries when cleaning the instrument

•Replace all batteries at the same time

This manual suits for next models

Table of contents

Other Extech Instruments Measuring Instrument manuals

Extech Instruments

Extech Instruments CO10 User manual

Extech Instruments

Extech Instruments MO25 User manual

Extech Instruments

Extech Instruments MW12 User manual

Extech Instruments

Extech Instruments 380973 User manual

Extech Instruments

Extech Instruments AUT10 User manual

Extech Instruments

Extech Instruments AN10 User manual

Extech Instruments

Extech Instruments 461995 User manual

Extech Instruments

Extech Instruments HD350 User manual

Extech Instruments

Extech Instruments ExStik II EC400 User manual

Extech Instruments

Extech Instruments LT250W User manual

Extech Instruments

Extech Instruments 407706 User manual

Extech Instruments

Extech Instruments 380801 User manual

Extech Instruments

Extech Instruments SDL400-NIST User manual

Extech Instruments

Extech Instruments PH220-C User manual

Extech Instruments

Extech Instruments 451112 User manual

Extech Instruments

Extech Instruments 451112 User manual

Extech Instruments

Extech Instruments FHT200 User manual

Extech Instruments

Extech Instruments 407764 User manual

Extech Instruments

Extech Instruments EA31 User manual

Extech Instruments

Extech Instruments 45168CP User manual

Extech Instruments

Extech Instruments 407730 User manual

Extech Instruments

Extech Instruments AN300 User manual

Extech Instruments

Extech Instruments UV510-NIST User manual

Extech Instruments

Extech Instruments CO10 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual