EVOC EC0-1814 User manual
EC0-1814(B)
Embedded ATX 带 VGA/2LAN/6COM
Embedded ATX with VGA/2LAN/6COM
Version: C00
Copyright Notice
Information offered in this manual is believed to be correct at the time of printing, and
is subject to change without prior notice in order to improve reliability, design and
function and does not represent a commitment on the part of the manufacturer. In no
event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of improper installation and/or use, or inability to
use the product or documentation.
This user manual is protected by copyright. No part of this manual may be reproduced,
stored in any retrieval system, or transmitted, in any form or by any means,
mechanical, electronic, photocopied, recorded or otherwise, without the prior written
permission from the manufacturer.
Trademarks
EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other
product names mentioned herein are used for identification purposes only and may be
trademark and/or registered trademarks of their respective companies.
Please visit our website: http://www.evoc.com for more information, or send an
Hotline: 4008809666
Safety Instructions
1. Please read this manual carefully before using the product;
2. Leave the board or card in the antistatic bag until you are ready to use it;
3. Touch a grounded metal object (e.g. for 10 seconds) before removing the board
or card from the anti-static bag;
4. Before installing or removing a board, wear the ESD gloves or ESD wrist strap;
handle the board by its edges only;
5. Before inserting, removing or re-configuring motherboards or expansion cards,
first disconnect the computer and peripherals from their power sources to
prevent electric shock to human bodies or damage to the product;
6. Remember to disconnect the AC power cord from the socket before removing
the board or moving the PC;
7. For PC products, remember to disconnect the computer and peripherals from the
power sources before inserting or removing a board;
8. Before connecting or disconnecting any terminal, peripheral or any device, be
sure the system is powered off and all the power sources are disconnected;
9. After turning off the computer, wait at least 30 seconds before turning it back on
Contents
Chapter 1 Product Introduction.....................................................................................1
Overview ......................................................................................................................1
Mechanical Dimensions, Weight and Environment ......................................................1
Typical Consumption....................................................................................................1
Microprocessor .............................................................................................................2
Chipset..........................................................................................................................2
System Memory............................................................................................................2
Graphics Function.........................................................................................................2
Network Function .........................................................................................................3
Audio Function.............................................................................................................3
Power Feature...............................................................................................................3
Expansion Bus ..............................................................................................................3
Watchdog Function.......................................................................................................3
Operating System .........................................................................................................3
On-board I/O.................................................................................................................3
Chapter 2 Installation....................................................................................................5
Product Outline.............................................................................................................5
Locations of Connectors ...............................................................................................6
Structure .......................................................................................................................7
Jumper Setting ..............................................................................................................8
Serial Port .....................................................................................................................9
USB Port.......................................................................................................................9
LAN Port ....................................................................................................................10
Power Connector ........................................................................................................11
Audio Connector.........................................................................................................12
SATA Connector .........................................................................................................12
Hot-swap of SATA Hard Disk.....................................................................................12
Keyboard and Mouse Connector ................................................................................15
VGA Graphic Connector ............................................................................................15
GPIO Connector .........................................................................................................15
LPT Connector ...........................................................................................................16
IDE Connector............................................................................................................16
Floppy Driver Connector............................................................................................17
Status Indicator and Control Connector......................................................................18
Fan Connector.............................................................................................................18
PCI Slot ......................................................................................................................19
PCIex16 Slot...............................................................................................................21
PCIex4 Slot.................................................................................................................22
Install the CPU............................................................................................................23
Install the CPU Fan.....................................................................................................23
Chapter 3 BIOS Setup ................................................................................................25
BIOS Overview ..........................................................................................................25
BIOS Parameter Setup................................................................................................25
Basic Function Setting for BIOS ................................................................................26
System Resource Managed by BIOS under X86 Platform .........................................38
Chapter 4 Install the Drivers.......................................................................................42
Appendix ....................................................................................................................43
Watchdog Programming Guide...................................................................................43
Digital IO Programming Guide ..................................................................................45
Troubleshooting and Solutions ...................................................................................47
Chapter 1 Product Introduction
EC0-1814(B) - 1 -
Chapter 1 Product Introduction
Overview
EC0-1814(B) is a high-performance Embedded ATX motherboard, which adopts
G41+ICH7R platform to realize high-performance design. It provides VGA single
display, two 10/100/1000Mbps LAN ports, six serial ports, eight USB ports, four
SATA connectors, one IDE connector and one FDC connector; therefore, the board
provides abundant connector choices for customers. It also provides one PCIe x16
expansion slot, one PCIe x4 expansion slot and four PCI expansion slots, which
provides abundant expansion choices for customers.
The product realizes high-performance as well as miniature design; thus, it can satisfy
the embedded requirements for such industries as ATM, POS, NET and Media, etc.
Mechanical Dimensions, Weight and Environment
Dimensions: 304.8mm (L) x 251.2mm (W) x 41.2mm (H);
Net Weight: 0.66Kg;
Operating Environment:
Temperature: -5C ~ 60C;
Humidity: 5% ~ 90% (non-condensing);
Storage Environment:
Temperature: -40C ~ 80C;
Humidity: 5% ~ 90% (non-condensing);
Typical Consumption
The typical consumption is based on the following idle status values.
Chapter 1 Product Introduction
- 2 - EC0-1814(B)
CPU: Intel®/Yorkfield/Core2Quad/Q9300/2.50GHz/6M/1333/SLAWE/M1/95W(10677h)
Memory: DDR3 1333 2GB Apacer x2
Operating System: Windows XP/32bit/Chinese SP3
Hard Disk: HITACHI HDP725025GLA380 250GB 7200RPM 8M SATA
+5V@ 1.38 A; +5%/-3%;
+3.3V@ 2.02 A; +5%/-3%;
+12V@ 0.66 A; +5%/-3%.
Microprocessor
Supports Intel® Core™2 Duo/Quad E7000, E8000&Q9000 series, Intel® Pentium®
E6000, E5000 and E2000 series and Intel® Celeron® E1000, E3000 and 400 series
CPU of LGA775 package, FSB: 800/1066/1333MHz
Intel® Core™2 Extreme QX9000 series CPU is not supported.
Chipset
Intel® G41 + Intel® ICH7R
System Memory
Provides two 240Pin DDR3 memory slots, supporting 800/1066MHz Un-buffered
non-ECC memory. The maximum memory capacity supported by a single memory
module is up to 2GB, while that supported by the board is up to 4GB.
Graphics Function
Supports VGA single display and hot swap function;
The maximum resolution and refresh rate supported is up to 2048x1536@75Hz.
Chapter 1 Product Introduction
EC0-1814(B) - 3 -
Network Function
Provides two 10/100/1000Mbps LAN ports; the LAN port in J2 (LAN1) supports S1,
S4 and S5 and Wake-on-LAN function.
Audio Function
Adopts HDA standard, supporting MIC-IN/LINE-IN/LINE-OUT.
Power Feature
Adopts ATX power, supporting S0, S1, S4 and S5 functions;
Expansion Bus
Provides four 32-bit PCI slots, one PCIE x16 slot and one PCIE x4 slot.
Watchdog Function
255 levels, programmable by minute or second;
Supports watchdog timeout interrupt or reset system.
Operating System
Supported OSs: Windows XP and Linux;
On-board I/O
Six serial ports, COM1 and COM2 support RS-232/RS-422/RS-485 mode
selection; Modem wake-up function is not supported;
One IDE connector;
Four SATA 2.0 connector, supporting hot swap function;
One FDD connector;
Eight USB 2.0 port;
One PS/2 keyboard and mouse connector;
Chapter 1 Product Introduction
- 4 - EC0-1814(B)
One 8-chanenl digital I/O.
Tips: how to identify the alarms
1. Long “beep” indicates system memory error;
2. Short “beep” indicates to power on the computer.
Chapter 2 Installation
EC0-1814(B) - 5 -
Chapter 2 Installation
Product Outline
H1 H8 H2
H10
H6
H4
H5
H7
H9
H3
Unit: mm
Warning!
Please adopt appropriate screws and proper installation methods (including
board allocation, CPU and heat sink installation, etc); otherwise, the board may
be damaged. It is recommended to use M3x6 GB9074.4-88 screws at H1 ~ H10.
This manual suits for next models
1
Table of contents
Other EVOC Motherboard manuals
EVOC
EVOC EC0-1815V2NAR User manual
EVOC
EVOC CPC-1814CLD5NA-N User manual
EVOC
EVOC EC5-1817LNAR User manual
EVOC
EVOC CPC-3813CLD3N User manual
EVOC
EVOC EC3-1820V2NA User manual
EVOC
EVOC EC7-1818CLD2NA User manual
EVOC
EVOC EC0-1818-C236 User manual
EVOC
EVOC EC3-1813 Series User manual
EVOC
EVOC EPE-1814V2NAR User manual
EVOC
EVOC EC7-1817LNAR User manual
