Euroscan RX2-6 User manual

EUROSCAN RX2-6 / TX2-6

Cabin and trailer recorder

USER MANUAL

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

1 of 28

Mai 15, 2014

TABLE OF CONTENTS

INTRODUCTION.......................................................................................................4

Data security .....................................................................................................................................4

Menu 1 Print menu......................................................................................6

1.1 Select compartment to print..........................................................................................6

1.2 Time zone offset for printing.........................................................................................6

1.3 Print event report..........................................................................................................6

1.4 Print parameter report ..................................................................................................6

1.5 Set print date................................................................................................................6

1.6 Delivery ticket settings..................................................................................................6

1.7 Print time period ...........................................................................................................7

1.8 Day start time...............................................................................................................7

1.9 Day end time................................................................................................................7

Menu 2 Alarm settings ...............................................................................8

2.1 Compartment 1.............................................................................................................8

2.2 Compartment 2 (same as Compartment 1)...................................................................8

2.3 Compartment 3 (same as Compartment 1)...................................................................8

2.4 Compartment 4 (same as Compartment 1)...................................................................8

2.5 Digital input 1................................................................................................................8

2.6 Digital input 2 (same as Digital input 1).........................................................................8

2.7 Digital input 3 (same as Digital input 1).........................................................................8

2.8 Digital input 4 (same as Digital input 1).........................................................................8

2.9 Alarm output test ..........................................................................................................8

Menu 3 User settings menu.......................................................................9

3.1 Set time........................................................................................................................9

3.2 Summer/Winter time correction ....................................................................................9

3.3 Set date........................................................................................................................9

3.4 Select language............................................................................................................9

3.5 Set display contrast......................................................................................................9

3.6 Set display backlight.....................................................................................................9

3.7 Set buzzer volume......................................................................................................10

3.8 Set buzzer frequency..................................................................................................10

3.9 Set buzzer on-time .....................................................................................................10

3.x TMS X2 V2.08............................................................................................................10

Menu 4 Status menu.................................................................................11

4.x Parameter menu.........................................................................................................11

Menu 5 Temperature input settings ........................................................12

5.1 T1 input > On/Off...................................................................................................12

5.1.1 Type...........................................................................................................................12

5.1.2 Name (sensor)............................................................................................................12

5.1.3 Name (free text) .........................................................................................................12

5.2 T2 input > on/off, menu structure as 5.1 ................................................................12

5.3 T3 input > on/off, menu structure as 5.1 ................................................................12

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

2 of 28

Mai 15, 2014

5.4 T4 input > on/off, menu structure as 5.1 ................................................................12

5.5 T5 input > on/off, menu structure as 5.1 ................................................................12

5.6 T6 input > on/off, menu structure as 5.1 ................................................................12

Menu 6 Digital inputs settings.................................................................13

6.1 Digital input 1 > On/Off...........................................................................................13

6.1.1 Name > Refrigeration ............................................................................................13

6.1.3 Active > high/low ..................................................................................................13

6.1.4 Alarm > On/Off .....................................................................................................13

6.1.5 Store position when input active/inactive or both........................................................14

6.2 Digital input 2 > On/Off, menu structure as 6.1.......................................................14

6.3 Digital input 3 > On/Off, menu structure as 6.1.......................................................14

6.4 Digital input 4 > On/Off, menu structure as 6.1.......................................................14

Menu 7 Compartment settings ................................................................15

7.1 Compartment 1 > On/Off .......................................................................................15

7.1.1 Compartment name > (compartment 1)..................................................................15

7.1.2 Print T1 > Yes/No.................................................................................................15

7.1.3 Alarm on T1 > Yes/No............................................................................................15

7.1.4 Print T2 > Yes/No.................................................................................................15

7.1.5 Alarm on T2 > Yes/No ............................................................................................15

7.1.5.1 Store position when alarm T2 active > Yes/No ...........................................................15

7.1.6 Print T3 > Yes/No.................................................................................................15

7.1.7 Alarm on T3 > Yes/No............................................................................................15

7.1.8 Print T4 > Yes/No..................................................................................................16

7.1.9 Alarm on T4 > Yes/No............................................................................................16

7.1.10 Print T5 > Yes/No..................................................................................................16

7.1.11 Alarm on T5 > Yes/No............................................................................................16

7.1.12 Print T6 > Yes/No..................................................................................................16

7.1.13 Alarm on T6 > Yes/No............................................................................................16

7.1.13.1 Store position when alarm T6 active > Yes/No...........................................................16

7.1.14 Store position on COMPARTMENT ALARM >NO ......................................................16

7.1.15 Print D1 > On/Off...................................................................................................16

7.1.16 Print D2 > On/Off...................................................................................................16

7.1.17 Print D3 > On/Off...................................................................................................16

7.1.18 Print D4 > On/Off...................................................................................................16

7.2Compartment 2, 3 and 4 > On/Off, menu structure as menu 7.1...............................16

Menu 8 Alarm settings .............................................................................17

8.1 Alarm Group 1 > On/Off..........................................................................................17

8.1.1 Name > Frozen......................................................................................................17

8.1.3 Temperature upper limit .............................................................................................17

8.1.4 Temperature lower limit..............................................................................................17

8.1.5 % upper limit...............................................................................................................17

8.1.6 % lower limit...............................................................................................................17

8.1.7 Initial Delay time > 120 min......................................................................................17

8.1.8 Delay time > 60 min................................................................................................17

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

3 of 28

Mai 15, 2014

8.2 Alarm Group 2 > On/Off, menu structure as menu 8.1............................................17

8.3 Alarm Group 3 > On/Off, menu structure as menu 8.1............................................17

8.4 Alarm Group 4 > On/Off, menu structure as menu 8.1............................................17

8.5 ALARM BEHIND PIN..................................................................................................17

8.6 OUTPUT FUNCTION.................................................................................................17

8.7 alarm repetitions.........................................................................................................18

8.7.1 Interval of alarm repetitions ........................................................................................18

8.7.2 Alarm output time span...............................................................................................18

Menu 9 Printer settings............................................................................19

9.1 Graph upper limit > +50 °C......................................................................................19

9.2 Graph lower limit > -30 °C .......................................................................................19

9.3 Graph mm per hour > 10 mm ..................................................................................19

9.4 User menu > Yes/No.............................................................................................19

9.5 Delivery ticket setting..................................................................................................19

9.6 Print time period > 10 hours....................................................................................19

9.7 Day start time > 06:00 ............................................................................................19

9.8 Day end time > 18:00 .............................................................................................19

Menu 10 General settings ..........................................................................20

10.1 Temperature unit > °C/°F.........................................................................................20

10.2 Date format > dd/mm/yyyy or mm/dd/yyyy............................................................20

10.4 Sample rate > minute(s) .........................................................................................20

10.5 Vehicle ID > ABCDEF.............................................................................................20

10.6 Header text > Abcdef..............................................................................................20

10.7 Customer ID > ().....................................................................................................20

10.8 Pin number > 1111 (default pin code).....................................................................20

10.9 Correct. factor > Recommended: XX / Setting: +/-X.................................................20

10.10 Serial number > 12400005 ....................................................................................20

Menu 11 Communication settings.............................................................21

11.1 COM 1........................................................................................................................21

11.2 COM 2........................................................................................................................22

11.3 COM 3........................................................................................................................22

11.4 COM 4........................................................................................................................22

Attachment A Technical data.............................................................................23

Attachment B Replace paper roll.......................................................................24

Attachment C Error codes..................................................................................25

Attachment D Factory settings……………………………………………………26

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

4 of 28

Mai 15, 2014

INTRODUCTION

This manual is a user guideline for the use of the EUROSCAN RX2-6/TX2-6 6 sensor temperature

recorders. To avoid guarantee exclusion due to incorrect installation, it is essential to follow the instructions

and recommendations in the installation manual.

EUROSCAN RX2-6 and EUROSCAN TX2-6 temperature recorders are developed and produced to

conform to the applicable European and National guidelines, for the delivery of chilled and frozen transport

goods in transport vehicles.

EUROSCAN RX2-6/TX2-6 can provide evidence of correct temperatures for every trip in the form of a

delivery ticket, numerical or graphical print-out. All data is stored with a date/time stamp in a large flash

memory. Data will not be lost if power supply is disconnected. The real time clock is powered by an internal

back-up battery.

Both products are produced by Euroscan in the EU. Euroscan has a policy of continuous development and

improvements. Therefore, products, manuals and technical information are subject to change without prior

notice.

Data security

Although the Euroscan X2-6 recorder has be 0en specifically designed and tested for use in the harsh

vehicle environment there are certain circumstances beyond our control, i.e. lightning strikes, high voltage

peaks, theft, manipulation, etc., where data loss could occur. Because the temperature data might be

crucial to providing evidence in the case of transport damages, we strongly advise you to take the following

precautions:

•Print or download data to a PC on a weekly basis as a back-up.

•For a long-term storage of the data, we recommend to download the data into the Euroscan

EuroLOG software via one of the communication options offered by Euroscan. In addition to the

infrared connection, Euroscan offers a variety of communication options for automated data

transfer from the recorder to the different Euroscan software options. For further information

please contact the Euroscan Sales team or visit our website at www.euroscangroup.com.

•Check the correct functioning of the recorder frequently (minimum – together with the fridge

service).

•Check the recording system every 12 months to see if the measurement is within the legal error

limit. The annual test is obligatory, according to resp. EN 12830 or EN 13486.

•Do not weld without disconnecting the power from the Euroscan recorder or the vehicle.

•Do not take the power supply from a generator system without extra filter protection against high

voltage peaks. Preferably, always take power direct from the vehicle or fridge battery.

•Follow the installation and user instructions.

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

5 of 28

Mai 15, 2014

To navigate through the menus and to select in the edit mode a parameter from a table, use the

buttons as described below:

Blue

↑

Previous item of the menu

< In edit mode: previous item from the list

Yellow

↓

Next item of the menu

> In edit mode: next item from the list

Green edit Menu select, change to edit mode or one menu level down

accept In edit mode: accept input and go to next menu point

Red <-Menu One menu level up

<-Cncl In edit mode: cancel input and display the non-changed value.

Press 2 seconds for rejecting input and return to previous menu.

When entering free programmable text like names the button functions are as follows:

Blue

↑

Next character from the list

Yellow

↓

Previous character from the list

Green < One character to the left

Red > One character to the right

Blue + Yellow <-cncl Cancel input and display the non-changed value.

Press for 2 seconds to reject the input and go back to the

previous menu.

Green + Red accept Accept input and go to next menu point.

EUROSCAN RX2-6/TX2-6 has four different user menus which are accessible via the keyboard without

PIN code:

•Print menu

•Alarm menu

•User settings menu

•Status menu

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

6 of 28

Mai 15, 2014

1.1 Select compart-

ment to print

(Compartment 1)

↑↓EDIT <-MENU

1.2 Time zone offset

for printing

(0 hour(s))

↑↓EDIT <-MENU

Delivery ticket

CURRENT VALUES

<-CNCL

1.4 Print report

PARAMETERS

↑↓ACCEPT <-MENU

1.5 Set print date

↑↓EDIT <-MENU

1.6 Delivery ticket

settings

↑↓EDIT <-MENU

1.3 Print report

EVENTS

↑↓ACCEPT <-MENU

Menu 1 Print menu

Press the blue button. The last selected print choice will be displayed.

Printing now starts after 2 seconds. Repeatedly pressing the blue

button will scroll between the available print options: delivery ticket,

journey ticket graphical, journey ticket, numerical, and historical ticket.

By pressing the blue button for more than 2 seconds the following sub-menus are reached:

1.1 Select compartment to print

By pressing the green button you confirm that you wish to change the

settings. The chosen compartment can be selected by pressing <

>and your choice can be confirmed with ACCEPT

1.2 Time zone offset for printing

This option is intended to have the local time printed on your ticket. In

case “0 hour(s)” is selected, the recorder time will be printed.

1.3 Print event report

When pressing the green button/ ACCEPT printing of the event report

will start.

1.4 Print parameter report

By pressing the green button/ ACCEPT, the parameter report will be

printed after entering the correct pin code (1-2-1-2).

1.5 Set print date

With EDIT you can select a historical date for printing. After you

pushed ACCEPT you can select the required report with the blue

button. Printing starts after a delay of 2 seconds.

1.6 Delivery ticket settings

With EDIT you can set the desired information printed on the

delivery ticket. You can select “actual value”, “actual + average” or

“actual, average and min-max values”. By pressing the green button

you ACCEPT your choice.

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

7 of 28

Mai 15, 2014

1.7 Print time period

(10 hour(s))

↑

↓

EDIT <-MENU

1.8 Day start time

( 0:00)

↑↓EDIT <-MENU

1.9 Day end time

(18:00)

↑↓EDIT <-MENU

JOURNEY START

Print marker set

1.7 Print time period

With this option you define the total print period.

1.8 Day start time

This option defines the time which is taken as start time for the

printout (printout is printed backwards until this time).

1.9 Day end time

This option defines the time from which the printout is printed

backwards (please note that a printout is always printed backwards,

i.e. from the day end time till start time).

Examples:

−You want to make a printout for a certain date in the past for a time

period which exceeds the day start time. Please change day start time

to 0:00 h and enter the desired time period.

−You want to make a printout for 2 days. Change time period to 2 days, day start time to 0:00 h - day end

time to 0:00 h.

−By pressing the YELLOW key for more than 3 seconds you define a

starting point for a dedicated journey. The display will show this.

Printing will start from the defined journey start.

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

8 of 28

Mai 15, 2014

Alarms

Comp 1 Comp 2

OFF OFF

XX XX X

2.1 Compartment 1

(Off)

↑↓EDIT <-MENU

2.1 Compartment 1

Frozen

< >ACCEPT <-CNCL

Menu 2 Alarm settings

Up to four different alarm types can be allocated to up to four different

compartments. The various alarms (and compartments) are only

available if the supervisor has preset and configured them in the

parameter menu.

Digital input 1 and 2: When not enabled as digitals, they are used for switching on and off the alarm

compartments 1 and 2. The driver is able to select either compartment, followed

by: OFF / last alarm setting

Press the YELLOW button to access the alarm menu.

2.1 Compartment 1

When pressing the yellow button a second time you reach the options

which can be changed. With

↑

↓

you toggle between

the compartments available. The value given in brackets shows the

actual setting. By pressing EDIT you can change alarms for the

selected compartment.

With < >you select the desired alarm type (including

alarm off). By pressing ACCEPT the new setting will be activated. The

display now changes to the next menu entry.

2.2 Compartment 2 (same as Compartment 1)

2.3 Compartment 3 (same as Compartment 1)

2.4 Compartment 4 (same as Compartment 1)

2.5 Digital input 1

The Euroscan X2-6 recorders are provided with 4 digital inputs that can be used for invoking alarms from

door switches and refrigerators. An alarm condition is reached if an input remains in an alarm condition for

a certain period of time. This preset (delay time) can be up to 60 minutes.

2.6 Digital input 2 (same as Digital input 1)

2.7 Digital input 3 (same as Digital input 1)

2.8 Digital input 4 (same as Digital input 1)

2.9 Alarm output test

Pressing the green key TEST will initiate the external alarm for 10 seconds. This may be a light or buzzer connected to

the recorder.

EUROSCAN RX2-6 / TX2-6

USER MANUAL

EN-MAN-0042.02

9 of 28

Mai 15, 2014

3.1 Set time

(14:00:31)

↑

↓

EDIT <-MENU

3.1 Set time

14:00:31

< - cncl ` accept



↑

↓



3.2 Sum/Wint corr.

(Auto. adjustment)

↑↓EDIT <-MENU

3.3 Set date

18/02/2008

< - cncl ` accept



↑↓<> 

3.4 Select language

(English)

< >ACCEPT <-CNCL

Menu 3 User settings menu

With the user settings, several adjustments can be made to offer the

user a maximum of user convenience. By pressing the green button

the user setting menu will be activated.

Toggle with

↑

↓

between the available menu options

(3.1 to 3.2, 3.3, …). Between brackets (..) the actual setting is

displayed.

With EDIT you enter the edit mode. In this menu you can change the settings at your convenience. The

supervisor PINCODE, factory set at, 1111, is required. The following pictures show the display in the edit

mode.

3.1 Set time

Select hours, minutes, and seconds with < > and adjust

with

↑

↓

. Confirm the setting with ACCEPT (green-

red).

3.2 Summer/Winter time correction

If you do not want an automatic adjustment of summer and winter time

you could define this here. The supervisor PINCODE, is required.

3.3 Set date

Select date, month, and year with < >and adjust with

< >. Confirm setting with ACCEPT (green-red

simultaneously). The supervisor PINCODE is required.

3.4 Select language

Select the desired language with < >and confirm with

ACCEPT.

3.5 Set display contrast

Set the desired display contrast < >



and confirm with

ACCEPT.

3.6 Set display backlight

Set the intensity of the backlight to your convenience

< >and confirm with ACCEPT. The light switches on

when you press any button and switches off after 30 seconds.

3.5 Set display

contrast

< >ACCEPT <-CNCL

3.6 Set display

backlight

< >ACCEPT <-CNCL

This manual suits for next models

Table of contents

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual