When the UV LED function is turned on, it will radiate intense UV light
during operation. Since UV light can be harmful to eyes, do NOT look
directly into the UV light, even through an optical instrument. In case of
the light reection, UV protective glasses are required to use in order to
avoid damage by the light.
CAUTION
* Do not use the unit near any device which
generates strong electromagnetic radiation or
near a static electrical charge, as these may
cause errors.
* Do not use the unit where it may be exposed
to corrosive or explosive gases. The unit may be
damaged, or explosion may occur.
* Do not keep or use this unit in an environment
where it will be directly illuminated by sunshine,
or where it condensation. If you do, it may be deformed, its insulation may
be damaged, or it may no longer function according to specication.
* Do not place the meter on or around hot objects (70°C/158°F). It may
cause damage to the case.
* If the meter is exposed to signicant changes in ambient temperature,
allow 30 minutes for temperature stabilization, before taking measurement.
DANGER
INTRODUCTION
This instrument is a 4 digit, portable, easy to use and compact-sized digital
“ferrous” or “non-ferrous” coating designed for simply one hand
operation. Meter comes with backlight LCD display and Auto Power O (60
seconds approx.) to extend battery life.
SAFETY INFORMATION
It is recommended that you read the safety and operation instructions
before using the coating thickness gauge.
