PAINT BORER 518 USB 2
BAE 518 USB
TABLE OF CONTENTS
Page
1General information 4
1.1 Incoming goods inspection 4
1.2 Proper and intended usage 4
1.3 Storage and operations 4
1.4 Safety information 4
1.5 Copyright protection 4
1.6 Address of the manufacturer 4
2Device specifications 5
2.1 Designation and type 5
2.2 Included in the delivery 5
2.2.1 Base unit 5
2.2.2 Additional accessories (must be ordered optionally) 5
2.2.3 Replacement parts 5
2.3 Technical specifications 6
2.3.1 Base unit 6
2.3.2 Wedge cut drill 6
3Commissioning –Operations –Handling 7
3.1 Commissioning / driver and software installation 9
3.1.1 Minimum system requirements 9
3.1.2 Camera driver 9
3.1.3 Software installation 9
3.2 Commissioning and calibration 10
3.3 Power supply 14
3.4Lighting and auxiliary lighting 14
3.3 Setting the image focus 15
3.4 Slider mechanism 16
3.5 Wedge cut drill 16
4Program functions 17
4.1 Menu and screen components 17
4.2 Information about the sample 19
4.3 Selection of drill and image color 20
4.3.1 Drill selection 20
4.3.2 Image color 20
4.4 Composition of the sample (layer composition) 21
5Layer thickness measurement 23
5.1 Preparing the test samples 23
5.2 Drilling into the sample 23
5.3 Carrying out the measurement (via software) 24
5.3.1 Grab image 24
5.3.2 Selecting the circles 25
5.3.3 Tracing the circles 25
5.3.4 Display of measured values 26
6Inserting a customer logo 27
