Erbauer EMST200 User manual
EAN: 3663602797357
EMST200
ORIGINAL INSTRUCTIONS
V180626
Guarantee
Product description
Assembly
Use
Care & maintenance
Safety instructions
02
1
x1
WARNING! Please read all safety warnings carefully and be
sure that they are fully understood before handling the tool.
x2 X2 (M12X105mm) X2 (M12)
x2 x2 x2
X4PCS(M6X43MM)
X4PCS(M6X27MM)
X4PCS(M6X60MM)
X4
x4
03
Product description
1 2
4
53
11 10 8912
6 7
04
05
I
F
H
G
KJ
2
2
6
06
L
O
N
M
07
Safety intructions
WARNING! When using electric tools basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury including
the following.
Read all these instructions before attempting to operate
this product and save these instructions.
1. Keep the work area clean.
GENERAL POWER TOOL SAFETY WARNINGS
than using your hand.
11. Do not overreach. Keep proper footing and balance at all times.
12. Maintain tool with care. Keep cutting tools sharp and clean for better and safer
2. Keep children away. Do not let persons, especially children, not involved in
the work touch the tool or the extension cord and keep them away from the
work area.
3. Store idle tools. When not in use, tools should be stored in a dry, high or locked
up place, out of reach of children.
4. Do not force the tool. It will do the job better and safer at the rate for which it
was intended.
5. Use the right tool. Do not force small tools to do the job of a heavy-duty tool.
Do not use tools for purposes not intended, for example, do not use circular
saws to cut tree limbs or logs.
6. Dress properly. Do not wear loose clothing or jewellery, they can be caught
in moving parts. Non-skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
7. Use protective equipment. Use safety glasses. Use face or dust mask if working
operations create dust.
8. Connect dust extraction equipment. If the tool is provided for the connection
of dust extraction and collecting equipment, ensure these are connected and
properly used.
9. Do not abuse the cord. Never yank the tool to disconnect it from the socket.
Keep the cord away from heat, oil and sharp edges.
10. Secure work. Where possible use clamps or a vice to hold the work. It is safer
performance. Follow instructionsfor lubrication and changing accessories.
08
HEALTH ADVICE
WARNING! When drilling, sanding, sawing or grinding,
dust particles will be produced. In some instances,
depending on the materials you are working with, this
dust can be particularly harmful to you (e.g. lead from
old gloss paint).
- You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
Inspect tool cord periodically and if damaged have them replaced by an authorised
service facility. Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean and free of oil or grease.
13. Disconnect tools. When not in use, beforeservicing and whenchanging
accessories such as blades, bits and cutters, disconnect tools from the power
supply.
14. Remove adjusting keys and wrenches. From the habit of checking to see
that keys and adjusting wrenches are removed from the tool before turning it
on.
15. Avoid unintentional starting. Ensure switch is in the “off” when plugging in.
16. Use outdoor extension leads. When tool is used outdoors, use only extension
cords intended for outdoor use and so marked.
17. Stay alert. Watch what you are doing. Use common sense. Do not operate tool
when you are tired.
18. Check damaged parts. Before further use of the tool, it should be carefully
checked to determinethat it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly repaired or replaced by
an authorised service centre unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorised service facility. Do not use
the tool if the switch dose not turn it on and off.
19. Warning. The using of any accessory or attachment otherthanthose
recommended in this instruction manual may present a risk of personal injury.
20. Have your tools repaired by qualified person. This electrical tool complies
with the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
21. If the replacement of the supply cord is necessary, this has to be done by
the manufacturer or his agent in order to avoid a safety hazard.
09
Before operating
-
-
-
-
-
-
-
-
-
-
-
-
- Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR MITRE SAW STAND
WARNING!
Do not operate the mitre saw stand until it
is assembled,
and you have read and understood the
following instructions and the warning labels on the
mitre saw stand.
This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
Know your accessory. Read the operator’s manual carefully. Learn its applications
and limitations, as well as the specific potential hazards related tothis accessory.
If any parts are missing, do not use the stand until the missing parts are replaced.
This stand is designed for use with mitre saws and slide mitre saws with a blade
diameter not larger than 450mm.
Maximum weight of the mitre saw and workpiece together must not exceed 200 kg.
Do not modify or use this stand for any purpose for which it is not intended.
Always ensure the mitre saw used is mounted securely and is stable before plugging
in the mitre saw.
This stand is designed to be used on a flat, stable surface. Do not use the product
on an uneven or unstable surface. Besure to allow enough roomto handle and
properly support the workpiece.
Follow the tool mounting instructions carefully, and ensure the tool is fastened
securely.
To reduce the risk of injury from the mitre saw moving or falling off the stand, always
check that all mounting bolts and nuts are securely tightened before moving the stand
or using the tool.
Do not lift any part of the mitre saw that is attached tothe stand.
Do not climb, sit or stand on this stand.
Do not use any attachments or accessories not recommended by the manufacturer
of this tool.The use of attachments or accessories not recommended can result in
serious personal injury.
When servicing, use only identical replacement parts. Use of any other parts may
create ahazard or cause product damage.
Do not at any time let brake fluids, gasoline, petroleum-based products or penetrating
-
-
10
Table of contents
Other Erbauer Tools manuals
