Endress+Hauser RIA14 User manual

Products Solutions Services

Operating Instructions

RIA14

Loop-powered field indicator

BA00278R/09/EN/05.22-00

71615257

2022-11-21

Table of contents RIA14

2 Endress+Hauser

Table of contents

1 About this document ................ 3

1.1 Symbols .............................. 3

1.2 Documentation ........................ 4

2 Basic safety instructions ............ 5

2.1 Requirements for the personnel ............ 5

2.2 Intended use .......................... 5

2.3 Workplace safety ....................... 5

2.4 Operational safety ...................... 5

2.5 Product safety ......................... 6

2.6 IT security ............................ 6

3 Incoming acceptance and product

identification ....................... 6

3.1 Incoming acceptance .................... 6

3.2 Product identification .................... 7

3.3 Storage and transport ................... 7

3.4 Certificates and approvals ................ 7

4 Mounting .......................... 8

4.1 Mounting requirements .................. 8

4.2 Mounting the measuring device ............ 8

4.3 Post-installation check .................. 10

5 Electrical connection .............. 10

5.1 Connection requirements ................ 10

5.2 Connecting the device .................. 11

5.3 Ensuring the degree of protection .......... 12

5.4 Post-connection check .................. 12

6 Operation options ................. 13

6.1 Overview of operation options ............ 13

6.2 Access to the operating menu via operating

keys ............................... 13

6.3 Structure and function of the operating

menu .............................. 15

6.4 Access to the operating menu via the

operating tool ........................ 16

7 Commissioning .................... 17

7.1 Post-installation check .................. 17

7.2 Switching on the device ................. 18

7.3 Configuring the measuring device .......... 18

8 Diagnosis and troubleshooting ..... 22

8.1 General troubleshooting ................. 22

8.2 Diagnostic list ........................ 22

9 Maintenance ...................... 23

9.1 Cleaning ............................ 23

10 Repair ............................ 23

10.1 General information ................... 23

10.2 Spare parts .......................... 23

10.3 Return .............................. 25

10.4 Disposal ............................ 25

11 Accessories ....................... 25

11.1 Communication-specific accessories ........ 25

12 Technical data .................... 26

12.1 Input ............................... 26

12.2 Output ............................. 26

12.3 Power supply ......................... 27

12.4 Performance characteristics .............. 28

12.5 Mounting ........................... 28

12.6 Environment ......................... 28

12.7 Mechanical construction ................ 29

12.8 Human interface ...................... 30

12.9 Certificates and approvals ............... 32

12.10 Documentation ....................... 32

RIA14 About this document

Endress+Hauser 3

1 About this document

1.1 Symbols

1.1.1 Safety symbols

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.1.2 Electrical symbols

Symbol Meaning

Direct current

Alternating current

Direct current and alternating current

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a

grounding system.

Potential equalization connection (PE: protective earth)

Ground terminals that must be connected to ground prior to establishing any other

connections.

The ground terminals are located on the interior and exterior of the device:

• Interior ground terminal: potential equalization is connected to the supply network.

• Exterior ground terminal: device is connected to the plant grounding system.

1.1.3 Symbols for certain types of information

Symbol Meaning

Permitted

Procedures, processes or actions that are permitted.

Preferred

Procedures, processes or actions that are preferred.

Forbidden

Procedures, processes or actions that are forbidden.

Tip

Indicates additional information.

Reference to documentation

Reference to page

About this document RIA14

4 Endress+Hauser

Symbol Meaning

Reference to graphic

Notice or individual step to be observed

… Series of steps

Result of a step

Help in the event of a problem

Visual inspection

1.1.4 Symbols in graphics

Symbol Meaning Symbol Meaning

1, 2, 3,... Item numbers

… Series of steps

A, B, C, ... Views A-A, B-B, C-C, ... Sections

Hazardous area

Safe area (non-hazardous area)

1.2 Documentation

For an overview of the scope of the associated Technical Documentation, refer to the

following:

•Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the

nameplate

•Endress+Hauser Operations app: Enter serial number from nameplate or scan

matrix code on nameplate.

1.2.1 Document function

The following documentation may be available depending on the version ordered:

Document type Purpose and content of the document

Technical Information (TI) Planning aid for your device

The document contains all the technical data on the device and provides

an overview of the accessories and other products that can be ordered for

the device.

Brief Operating Instructions (KA) Guide that takes you quickly to the 1st measured value

The Brief Operating Instructions contain all the essential information

from incoming acceptance to initial commissioning.

Operating Instructions (BA) Your reference document

The Operating Instructions contain all the information that is required in

the various phases of the life cycle of the device: from product

identification, incoming acceptance and storage, to mounting,

connection, operation and commissioning through to troubleshooting,

maintenance and disposal.

Description of Device Parameters

(GP)

Reference for your parameters

The document provides a detailed explanation of each individual

parameter. The description is aimed at those who work with the device

over the entire life cycle and perform specific configurations.

RIA14 Basic safety instructions

Endress+Hauser 5

Document type Purpose and content of the document

Safety Instructions (XA) Depending on the approval, safety instructions for electrical equipment in

hazardous areas are also supplied with the device. The Safety Instructions

are an integral part of the Operating Instructions.

Information on the Safety Instructions (XA) relevant to the device is

provided on the nameplate.

Supplementary device-dependent

documentation (SD/FY)

Always comply strictly with the instructions in the relevant

supplementary documentation. The supplementary documentation is an

integral part of the device documentation.

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill

the following requirements:

‣Trained, qualified specialists must have a relevant qualification for this specific function

and task.

‣Are authorized by the plant owner/operator.

‣Are familiar with federal/national regulations.

‣Before starting work, read and understand the instructions in the manual and

supplementary documentation as well as the certificates (depending on the

application).

‣Follow instructions and comply with basic conditions.

The operating personnel must fulfill the following requirements:

‣Are instructed and authorized according to the requirements of the task by the facility's

owner-operator.

‣Follow the instructions in this manual.

2.2 Intended use

• The device is a configurable field indicator with one sensor input.

• It is designed for mounting in the field.

• The manufacturer accepts no liability for damages resulting from improper or non-

intended use.

• Safe operation is only guaranteed if the Operating Instructions are observed.

• Only operate the device in the permitted temperature range.

2.3 Workplace safety

When working on and with the device:

‣Wear the required personal protective equipment as per national regulations.

2.4 Operational safety

Damage to the device!

‣Operate the device in proper technical condition and fail-safe condition only.

‣The operator is responsible for the interference-free operation of the device.

Incoming acceptance and product identification RIA14

6 Endress+Hauser

Modifications to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers!

‣If modifications are nevertheless required, consult with the manufacturer.

Repair

To ensure continued operational safety and reliability:

‣Carry out repairs on the device only if they are expressly permitted.

‣Observe federal/national regulations pertaining to the repair of an electrical device.

‣Use only original spare parts and accessories.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet

state-of-the-art safety requirements, has been tested, and left the factory in a condition in

which it is safe to operate.

It meets general safety standards and legal requirements. It also complies with the EU

directives listed in the device-specific EU Declaration of Conformity. The manufacturer

confirms this by affixing the CE mark to the device.

2.6 IT security

Our warranty is valid only if the product is installed and used as described in the Operating

Instructions. The product is equipped with security mechanisms to protect it against any

inadvertent changes to the settings.

IT security measures, which provide additional protection for the product and associated

data transfer, must be implemented by the operators themselves in line with their security

standards.

3 Incoming acceptance and product

identification

3.1 Incoming acceptance

Proceed as follows on receipt of the device:

1. Check whether the packaging is intact.

2. If damage is discovered:

Report all damage immediately to the manufacturer.

3. Do not install damaged components, as the manufacturer cannot otherwise

guarantee the material resistance or compliance with the original safety

requirements, and can also not be held responsible for the consequences that may

result.

4. Compare the scope of delivery against the contents of your order.

5. Remove all the packaging material used for transportation.

6. Do the data on the nameplate match the ordering information on the delivery note?

7. Are the technical documentation and all other necessary documents provided, e.g.

certificates?

If one of the conditions is not satisfied, contact your Sales Center.

RIA14 Incoming acceptance and product identification

Endress+Hauser 7

3.2 Product identification

The following options are available for identification of the device:

• Nameplate specifications

• Enter the serial number from the nameplate in the Device Viewer

(www.endress.com/deviceviewer): all the information about the device and an overview

of the Technical Documentation supplied with the device are displayed.

• Enter the serial number on the nameplate into the Endress+Hauser Operations App or

scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser

Operations App: all the information about the device and the technical documentation

pertaining to the device is displayed.

3.2.1 Nameplate

The right device?

The nameplate provides you with the following information on the device:

• Manufacturer identification, device designation

• Order code

• Extended order code

• Serial number

• Tag name (TAG)

• Technical values: supply voltage, current consumption, ambient temperature,

communication-specific data (optional)

• Degree of protection

• Approvals with symbols

‣Compare the information on the nameplate with the order.

3.2.2 Name and address of manufacturer

Name of manufacturer: Endress+Hauser Wetzer GmbH + Co. KG

Address of manufacturer: Obere Wank 1, D-87484 Nesselwang or www.endress.com

3.3 Storage and transport

Storage temperature: –40 to +80 °C (–40 to +176 °F)

Maximum relative humidity: < 95 % as per IEC 60068-2-30

Pack the device for storage and transportation in such a way that it is reliably

protected against impact and external influences. The original packaging offers the

best protection.

Avoid the following environmental influences during storage:

• Direct sunlight

• Proximity to hot objects

• Mechanical vibration

• Aggressive media

3.4 Certificates and approvals

Current certificates and approvals for the product are available at www.endress.com on the

relevant product page:

1. Select the product using the filters and search field.

2. Open the product page.

3. Select Downloads.

Mounting RIA14

8 Endress+Hauser

3.4.1 UL approval

More information under UL Product iq™, search for keyword "E225237")

4 Mounting

4.1 Mounting requirements

The device is designed for use in the field.

The orientation is determined by the legibility of the display.

Operating temperature range:

• –40 to +80 °C (–40 to +176 °F)

• –20 to +80 °C (–4 to +176 °F) when using the open collector output

Operating the device in the upper temperature limit range decreases the operating life

of the display.

The display may react slowly at temperatures < –20 °C (–4 °F).

At temperatures < –30 °C (–22 °F) the readability of the display can no longer be

guaranteed.

Altitude Up to 2 000 m (6 561.7 ft) above sea level

Overvoltage category Overvoltage category II

Pollution degree Pollution degree 2

4.1.1 Dimensions

The dimensions of the device are provided in the "Technical data" section of the Operating

Instructions.

132 (5.2)

135 (5.3)

112 (4.4)

166 (6.5)

106 (4.2) 121 (4.8)

121 (4.8)

!6.4

(0.25)

A0011152

 1 Device dimensions; specified in mm (in)

4.1.2 Mounting location

Information about the conditions (such as the ambient temperature, degree of protection,

climate class, etc.) that must be present at the mounting location so that the device can be

mounted correctly is provided in the "Technical data" section.

4.2 Mounting the measuring device

The device can either be mounted directly on the wall or mounted on a pipe using the

optional mounting kit →  9.

RIA14 Mounting

Endress+Hauser 9

The backlit display can be mounted in four different positions →  8.

It is essential that you clean and lubricate the thread prior to mounting.

4.2.1 Turning the display

Pos. 1

90°

90° 90°

Pos. 2 Pos. 3 Pos. 4

A0023724

 2 Field indicator, 4 display positions, can be fitted in 90° steps

The display can be turned in 90° steps.

1. Remove the cover clamp (1) and the housing cover (2).

2. Remove the display (3) from the electronics unit (4).

3. Turn the display to the desired position and then attach it to the electronics unit.

4. Clean the thread in the housing cover and housing base and lubricate if necessary.

(Recommended lubricant: Klüber Syntheso Glep 1)

5. Screw the housing cover (2) and O-ring together and fit the cover clamp (1) back on.

4.2.2 Direct wall mounting

Procedure for direct wall mounting of the device:

1. Drill 2 holes (see dimensions, →  1,  8)

2. Attach the device to the wall with 2 screws ⌀5 mm (0.2 in).

4.2.3 Pipe mounting

The mounting bracket is suitable for pipes with a diameter of 38 to 84 mm (1.5 to 3.3 in).

Electrical connection RIA14

10 Endress+Hauser

A0011258

 3 Pipe mounting of the device with mounting bracket

1 Mounting plate

2 Mounting bracket

3 2 M6 nuts

1. Applies to pipes with a diameter of 38 to 56 mm (1.5 to 2.2 in).

Attach the mounting bracket to the pipe.

2. Push the mounting plate onto the mounting bracket.

3. Fit the device on the mounting bracket with the two nuts (M6) supplied. The

mounting plate is not necessary for pipes with a diameter of

56 to 84 mm (2.2 to 3.3 in).

4.3 Post-installation check

Perform the following checks after mounting the device:

Device condition and specifications Notes

Is the measuring device damaged? Visual inspection

Is the seal undamaged? Visual inspection

Is the device fixed securely to the wall or mounting plate? -

Is the housing cover firmly mounted? -

Does the device match the measuring point specifications (ambient temperature,

measuring range etc.)?

See "Technical data" section

5 Electrical connection

5.1 Connection requirements

For information on the connection data, see the "Technical data" section.

NOTICE

Destruction or malfunction of parts of the electronics

‣ ESD - Electrostatic discharge. Protect the terminals from electrostatic discharge.

LCAUTION

Destruction of parts of the electronics

‣Switch off the power supply before installing and connecting the device.

Other manuals for RIA14

Other Endress+Hauser Measuring Instrument manuals

Endress+Hauser

Endress+Hauser Ceraphant T PTC31 User manual

Endress+Hauser

Endress+Hauser EngyCal RH33 Technical specifications

Endress+Hauser

Endress+Hauser Proline Promag 50 User manual

Endress+Hauser

Endress+Hauser Proline Promass F 500 User manual

Endress+Hauser

Endress+Hauser Prosonic M Series User manual

Endress+Hauser

Endress+Hauser Levelflex FMP53 Technical specifications

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Technical specifications

Endress+Hauser

Endress+Hauser Proline Cubemass C 100 PROFIBUS DP User manual

Endress+Hauser

Endress+Hauser RID14 User manual

Endress+Hauser

Endress+Hauser Levelflex M FMP40 User manual

Endress+Hauser

Endress+Hauser Proline Promag 55 User manual

Endress+Hauser

Endress+Hauser HART Proline t-mass I 300 User manual

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93T Portable User manual

Endress+Hauser

Endress+Hauser Prosonic M FMU40 Technical specifications

Endress+Hauser

Endress+Hauser Promag 300 User manual

Endress+Hauser

Endress+Hauser Proline Prowirl R 200 User manual

Endress+Hauser

Endress+Hauser Float Tank Gauge LT11 User manual

Endress+Hauser

Endress+Hauser Smartec S CLD132 User manual

Endress+Hauser

Endress+Hauser Proline Promass A 100 User manual

Endress+Hauser

Endress+Hauser Proservo NMS80 Technical specifications

Endress+Hauser

Endress+Hauser MemoLink User manual

Endress+Hauser

Endress+Hauser Prosonic S FMU90 PROFIBUS DP User manual

Endress+Hauser

Endress+Hauser Viomax CAS51D User manual

Endress+Hauser

Endress+Hauser Proline Cubemass 500 Instructions for use

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual

Acterna

Acterna MS1400 Operation manual

R&S

R&S ZPH manual