Emerson CASH A-401 User manual

Before installation, these instructions must be fully read and understood.

CASH TYPE A-401 CRYOGENIC PRESSURE REGULATOR

InstallatIon InstructIons

DESCRIPTION

The Type A-401 regulator is a fully automatic

pressure regulating valve designed for

cryogenic service in the pressure build-up

circuit. Because it may be used for either

cryogenic liquids or gases, it may be installed

either before or after the pressure build-up

coil.

SPECIFICATION DATA

Service: Cryogenic liquids and gases

(pressure reducing or pressure build-up

service)

Sizes: 1/2"

Connections: Threaded internal inlet

and outlet.

Body Material: ASTM B62 CA836 Bronze

Temperature Rating:

+150°F (339°K) to -320°F (78°K)

Maximum Initial Pressure: 600 psig (41.4 bar)

Capacity: For specific capacity information,

consult the factory.

GENERAL INSTALLATION INSTRUCTIONS

The Type A-401 regulator should be installed

in the horizontal position with the spring

chamber upright or down. For other installation

requirements, consult the factory. For easy

operation and maintenance, it is suggested that

manual shut-off valves be installed upstream

and downstream from the valve. Before

installing the valve, the piping and valve should

be thoroughly flushed out to remove any foreign

material. Install the valve with the inlet pipe

fitted to the inlet connection identified on the

valve body. Use a compatible sealant on the

male pipe threads and do not over-tighten the

valve connections.

CONSTRUCTION

See component description for materials of

construction.

All parts are commercially cleaned for oxygen

service.

OPERATING INSTRUCTIONS

Adjusting the Delivery Pressure

The regulator’s delivery pressure setting is

adjusted by turning the adjusting screw (1)

at the top of the spring chamber (3) after

loosening the adjusting screw lock nut (2).

To increase the delivery pressure, turn the

adjusting screw clockwise (into the spring

chamber). To decrease the delivery pressure,

turn the adjusting screw counter-clockwise (out

of the spring chamber). Tighten the adjusting

screw lock nut after the adjustment has been

made (and reinstall optional cap).

MAINTENANCE INSTRUCTIONS

CAUTION

Before attempting to replace any spare parts,

be sure to shut off all pressure connections to

the valve. With the valve closed however, system

pressure could still be locked between the shut

off valve and the inlet and/or outlet sides of the

regulator. Before proceeding with any valve

service, be certain to relieve the pressure from

both sides of the regulator.

Refer to section view on the following page for

parts identification. Repair parts can easily be

installed without removing the regulator from the

line.

CASH TYPE A-401 CRYOGENIC PRESSURE REGULATOR

InstallatIon InstructIons

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product.

Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Cash is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions, Emerson and

the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be

construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by

our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without

notice.

Emerson.com/FinalControl

Item Quantity Part No. Description Material

1 1 18524 Adjusting Screw SST

2 1 16684 Lock Nut SST

3 1 21500 Spring Chamber Bronze

4 1 08225 Spring Button Brass

5 1 13399 Name Plate Aluminum

6 2 02533 Drive Screw SST

7 1 - - - - Pressure Spring SST

8 1 08243 Diaphragm Stop Brass

9 1 12003 Gasket Teflon

10 122048 Diaphragm Sub - - - -

10a 107999 Nut SST

10b 110993 Washer SST

10c 122062 Pressure Plate Brass

10d 416586 Diaphragm Bronze

10e 112002 Gasket Teflon

10f 121956 P-Post Button SST

11 122173 Piston Sub - - - -

11a 122174 Piston Brass

11b 121510 Seat Disc Teflon

12 106711 Spring SST

13 121518 Gasket Gylon

14 121970 Bottom Plug Brass

15 421517 Screw SST

16 121507 Body Bronze

BILL OF MATERIALS

PB INLET PB OUTLET

FIGURE 1

Other Emerson Controllers manuals

Emerson

Emerson Fisher MR95 Series User manual

Emerson

Emerson CSB600 Series User manual

Emerson

Emerson E2 User manual

Emerson

Emerson DIXELL iCHILL IC100D EVO User manual

Emerson

Emerson PACSystems RX3i IC695CPE330 User manual

Emerson

Emerson Keystone EPI2 63 User manual

Emerson

Emerson Dixell XR75CX Series User manual

Emerson

Emerson Fisher FIELDVUE DVC2000 User manual

Emerson

Emerson Rosemount 3490 Series User manual

Emerson

Emerson Fisher 785C User manual

Emerson

Emerson Bettis G Series User manual

Emerson

Emerson DSM314 User manual

Emerson

Emerson Fisher 1069 User manual

Emerson

Emerson RSTi-EP CPE200 Series User manual

Emerson

Emerson FISHER 67 User manual

Emerson

Emerson Digistart CS User manual

Emerson

Emerson Dixell XRB Wiring diagram

Emerson

Emerson Fisher 1190 User manual

Emerson

Emerson Fisher 1052 User manual

Emerson

Emerson Fisher HSRL Series User manual

Emerson

Emerson FISHER CS200 Series User manual

Emerson

Emerson PNC001-A Series User manual

Emerson

Emerson A36 Manual

Emerson

Emerson Fisher 627 Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide