4
EN
DD51-E - DD51-E-RF
Models all rights reserved in accordance with the law. Always mention
the source when reproducing our drawings and photos.
Electronic digital position indicator
1. Safety Instructions
The product has been designed and manufactured in
accordance with the current regulations. The product
leaves the factory ready for use and complies with the
safety standards. To maintain the product in this state, it
is necessary that it is assembled and used properly, in the
closest compliance with this instructions manual and with
the following specific safety precautions.
Before installing and using the DD51-E, read carefully this
manual, which is intended as an indispensable supplement
to the existing documentation (catalogues, data sheets).
Morever, all the rules of law must be observed, in regard to
accident prevention and environmental protection.
The use, without complying with the
descriptions / specific parameters, (in
combination with systems / machines /
processes to be controlled), can lead to a
malfunction of the product, causing:
- health hazards,
- environmental hazards,
- damage to the product and to its proper functionality.
The device must not be used:
- in explosion hazard areas;
- in medical / life support areas and equipment.
Do not open the equipment and do not make any
modifications! Modification of the equipment could
adversely affect the reliability of the device and could
lead to hazards! Do not attempt any repairs. Always return
any defective equipment to the manufacturer! Any breach
of the integrity of the device as delivered will invalidate
the warranty.
Setup/Commissioning
In the event of abnormal behaviour (including change
of operating conditions), the device must be shut down
