- 8 -
6. Functions and buttons
Button Meaning Function
On/O
Lighting
Briey key press: Switching the device on/o
Long key press (3 seconds): Background lighting on (for 20 seconds)
Minimum
Maximum
Full scale
Selection of the display value:
MIN, MAX or FS (minimum value, maximum value, full scale).
Display of the maximum measuring span (e.g. 60.00 bar).
Menu
Zero point
The function menu is activated with a briey press.
A zero point adjustment is carried out with a long press.
Delete
Conrm
Deleting the MIN and MAX measured data storage.
Conrmation of the MENU functions.
7. Menu functions
The following settings are made using the MENU function
–Setting the measurement unit (bar, mbar, PSI, kPa, MPa)
–Setting the lter function
–Recalibration (see pt 10).
–Press the "MENU" button to adjust the parameters and the "OK" button to save the respective param-
eter. Will then jump to the next parameter.
–Keep the "OK" button pressed (for 3 seconds) to exit from the function menu.
If the user is in the function menu and does not activate any action for 20 seconds, he also exits from the
function menu and all parameters set are saved.
Overow
If the device displays "OFL" (overow), this means that the existing pressure is too high.
The device switches o automatically after 5 minutes if there is a maximum pressure change of 2% of the
respective end value.
