2
BASIC OPERATION
1. Calling indoor monitor
In a standby mode, input room number on door station, for example, when
inputting "123" on door station, then press “#” to enter the call state.
Note: During communication, pressing “*” on the door station, the call gets
disconnected.
2. Phonebook
In a standby mode, press “ ” or “ ” button on the keypad to open
phonebook page. Select and press “#” or “ ” on the keypad to call.
3. Unlock the door
3.1. Unlocking by PIN Code
In a standby mode, press “#” key and enter the PIN Code(default is 0000).
Then press “#” key again to confirm. If the PIN Code is correct, the door will
be unlocked; if not, it will make a sound like “clatter clatter”.
3.2. Unlocking by IC/ID card
Put the registered IC/ID card on card reader area of the door station. If
successful, the door will be unlocked.
4. Calling concierge
In a standby mode, press “ ” to call concierge directly. During ringing, press
“*” key to cancel the call.
