Dnake 902D-B9 User manual
User Manual
———
DNAKE 902D-B9
REMARK
Please follow the user manual for correct installation and testing. If there is any
doubt please call our tech-supporting and customer center.
Our company applies ourselves to reformation and innovation of our products. No
extra notice for any change. The illustration shown here is only for reference. If
there is any difference, please take the actual product as the standard.
The product and batteries must be handled separately from household waste.
When the product reaches the end of service life and needs to be discarded,
please contact the local administrative department and put it in the designated
collection points in order to avoid the damage to the environment and human
health caused by any disposal. We encourage recycling and reusing the material
resources.
CATALOG
PRODUCT FEATURE ............................................. 1
TECHNICAL PARAMETER ..................................... 1
PACKAGE CONTENT ............................................. 2
OVERVIEW.............................................................. 3
BASIC OPERATION ................................................ 5
DEVICE SETTING ................................................... 7
WEB SETTING ...................................................... 11
SYSTEM DIAGRAM .............................................. 25
DEVICE WIRING ................................................... 26
INSTALLATION...................................................... 29
TROUBLESHOOTING........................................... 30
SAFETY INSTRUCTION ....................................... 31
1
PRODUCT FEATURE
1. Powered by PoE or power adapter (DC12V/2A)
2. Open the door by face recognition (10,000 users)
3. Liveness detection
4. Open the door by IC card (100,000 users)
5. Support SIP 2.0 protocol, easy integration with other SIP devices
6. Easy integration with elevator control system
7. 2MP camera with WDR mode
TECHNICAL PARAMETER
Power Supply: PoE (802.3af) or DC 12V/2A
Standby Power: 3 W
Rated Power: 10 W
Video Resolution: up to 1920 x 1080
Working Temperature: -10℃to +55℃(default); -40℃to +55℃(with heating film)
Storage Temperature: -40℃to +70℃
Working Humidity: 10% to 90% (non-condensing)
2
PACKAGE CONTENT
MODEL: 902D-B9 (Flush Mounting)
902D-B9
Screw Fixing Seat
(4 pcs)
PA4×25 (4 pcs) PA3×8 (2 pcs) Seal Ring
Rear Cover
Wrench Screw
Wires Quick Start Guide
3
OVERVIEW
4
5
BASIC OPERATION
1. Call and Monitor
1.1. Call Indoor Monitor
In standby mode, press room numbers + #/dial on Door Station to call Indoor
Monitor. During the call, press * on Door Station again to end the call. If the call
fails or Indoor Monitor is busy, Door Station will make a beep sound.
1.2. Monitor Door Station
Click Monitor icon on Indoor Monitor’s homepage to monitor Door Station.
2. Phonebook
Press up or down button to enter phonebook page. You can dial any residents in
this phonebook.
3. Unlock
Press #+PIN Code+# to unlock.
4. Concierge
Press concierge button to call Master Station.
5. Add Cards by Admin Card
5.1. Add other cards
Step 1: Tap the admin card once;
Step 2: And then tap other cards immediately. Other cards you have tapped can
be used to open the door;
Step 3: Tap the admin card again to finish.
5.2. Delete other cards one by one
Step 1: Tap the admin card twice;
6
Step 2: And then tap other cards immediately. Other cards you have tapped will
be deleted;
Step 3: Tap the admin card again to finish.
5.3. Delete all other cards
Tap the admin card five times. All the other cards will be deleted.
Tips: The admin card can only be used to manage cards. It cannot be used
to open the door.
Table of contents
Other Dnake Intercom System manuals
