Dnake IPK03 User manual
User Manual
———
DNAKE IPK03
REMARK
Please follow the user manual for correct installation and testing. If there is any
doubt please call our tech-supporting and customer center.
Our company applies ourselves to reformation and innovation of our products. No
extra notice for any change. The illustration shown here is only for reference. If
there is any difference, please take the actual product as the standard.
The product and batteries must be handled separately from household waste.
When the product reaches the end of service life and needs to be discarded,
please contact the local administrative department and put it in the designated
collection points in order to avoid the damage to the environment and human
health caused by any disposal. We encourage recycling and reusing the material
resources.
CATALOG
PRODUCT FEATURE ............................................. 1
TECHNICAL PARAMETER ..................................... 1
PACKAGE CONTENT ............................................. 2
OVERVIEW.............................................................. 3
BASIC OPERATION ................................................ 5
SYSTEM DIAGRAM .............................................. 24
DEVICE WIRING ................................................... 25
INSTALLATION...................................................... 29
TROUBLESHOOTING........................................... 33
SAFETY INSTRUCTION ....................................... 34
1
PRODUCT FEATURE
1. Plug & Play
2. User-friendly interface
3. Standard PoE
4. One-touch calling
5. Remote unlocking
6. CCTV integration
TECHNICAL PARAMETER
Indoor Monitor E216
Power Supply: PoE (802.3af) or DC 12V/2A
Standby Power: 1.5 W
Rated Power: 9 W
Display: 7-inch TFT LCD
Screen: Capacitive touchscreen
Resolution: 1024 x 600
Working Temperature: -10℃to +55℃
Storage Temperature: -40℃to +70℃
Working Humidity: 10% to 90% (non-condensing)
Door Station S212
Power Supply: PoE (802.3af) or DC 12V/2A
Standby Power: 1.5 W
Rated Power: 3.5 W
Video Resolution: 1280 x 720
Working Temperature: -40'C to +55C
Storage Temperature: -40'C to +70'C
Working Humidity: 10% to 90% (non-condensing)
2
PACKAGE CONTENT
MODEL: IPK03
E216 Wiring Cover PM4×20 (2 pcs) Diode (3 pcs)
S212 Wiring Cover
Sealing Plug of
Wiring Port
Junction Pressing
PM2.5×6 (4 pcs)
Rear Cover
Screw Fixing Seat
(2 pcs)
PA4×30 (2 pcs) PM4×20 (2 pcs) FM3×4.5 (2 pcs)
Wrench Screw Diode (2 pcs) User Manual
3
OVERVIEW
4
Note:
Calling indicator light: The 1st indicator light will activate if the call button is
pressed.
Talking indicator light: The 2nd indicator light will activate if the call is picked up
or the Door Station is being actively monitored.
Unlocking indicator light: The 3rd indicator light activates for 3 seconds when
the door is unlocked.
Relay Outputs: Supports 2 relay outputs.
5
BASIC OPERATION
1. Onboarding
1.1. Language 1/3
Language is the first setting. We have 16 kinds of languages (Chinese Simplified,
Chinese Traditional, English, Spanish, German, Polish, Russian, Turkish,
Hebrew, Arabic, Portuguese, French, Italian, Slovak, Vietnamese, and Dutch) for
customers to choose from. Click Next to move on.
1.2. Indoor Monitor Settings 2/3
1. Is it your first Indoor Monitor?
If yes, this Indoor Monitor will be regarded as the main one. If not, your first
Indoor Monitor will be the main one while this one will be the subordinate one.
2. Network of Indoor Monitor
6
The network of Indoor Monitor can be either dynamic or static. Select DHCP to
enable dynamic network or fill in IP, Mask, and Gateway to set up static network
for Indoor Monitor.
1.3. Door Station Sync 3/3
1. Searching Door Station.
Door Station should be connected to the same LAN as Indoor Monitor’s when
Indoor Monitor is searching Door Station.
Please check network and devices if not found. Click Search to try again.
Table of contents
Other Dnake Intercom System manuals
