Dnake 290M-S8 User manual
User Manual
———
DNAKE 290M-S8
REMARK
Please follow the user manual for correct installation and testing. If there is any
doubt please call our tech-supporting and customer center.
Our company applies ourselves to reformation and innovation of our products. No
extra notice for any change. The illustration shown here is only for reference. If
there is any difference, please take the actual product as the standard.
The product and batteries must be handled separately from household waste.
When the product reaches the end of service life and needs to be discarded,
please contact the local administrative department and put it in the designated
collection points in order to avoid the damage to the environment and human
health caused by any disposal. We encourage recycling and reusing the material
resources.
CATALOG
PRODUCT FEATURE ............................................. 1
TECHNICAL PARAMETER ..................................... 1
PACKAGE CONTENT ............................................. 2
OVERVIEW.............................................................. 3
BASIC OPERATION ................................................ 4
DEVICE SETTING ................................................. 13
WEB SETTING ...................................................... 19
SYSTEM DIAGRAM .............................................. 37
DEVICE WIRING ................................................... 38
INSTALLATION...................................................... 40
TROUBLESHOOTING........................................... 41
SAFETY INSTRUCTION ....................................... 42
1
PRODUCT FEATURE
1. Easy configuration
2. 7-inch capacitive touch screen
3. Powered and communicated by 2-wire
4. Support SIP 2.0 protocol, easy integration with other SIP devices
5. Easy integration with elevator control system
6. Support monitoring 8 IP cameras
TECHNICAL PARAMETER
System: Linux
RAM: 64 MB
ROM: 128 MB
Front Panel: Plastic
Power Supply: Two wire supply
Standby Power: 1.5 W
Rated Power: 9 W
Ethernet Port: 2-wire port
Resolution: 800 x 480
Working Temperature: -10℃to +55℃
Storage Temperature: -40℃to +70℃
Working Humidity: 10% to 90% (non-condensing)
2
PACKAGE CONTENT
MODEL: 290M-S8
290M-S8 Wiring Cover PM4×20 (2 pcs) Diode (8 pcs) Wires
Quick Start Guide
3
OVERVIEW
4
BASIC OPERATION
1. Call
Go to Dial and enter Building number + Building + Unit number + Unit + Room
number + dial icon to call Indoor Monitor (such as 1 + Building + 1 + Unit + 1111
+ Dial button). Or you can press Concierge here to call Master Station.
2. Doors
Click Doors icon on Indoor Monitor’s homepage to monitor Door Station. You can
unlock by clicking door icon or switch to monitor other devices by clicking arrow or
the name above.
3. Message
Indoor Monitor can receive the messages sent by the CMS, Master Station or
Indoor Monitor. Up to 64 records can be received in SMS.
5
Click + icon on Outgoing page. Users can send message to Indoor Monitor or
Master Station. Before sending message, users need to fill in the receiver’s IP
address on Indoor Monitor webpage (Concierge IP in Intercom > Call column).
4. DND
Click DND icon on the right upper corner to enable do not disturb function. No
calls can call in. Users can set DND to turn on whole day or a period of time.
5. Cameras
On the 2nd homepage, click Cameras. Up to 8 IPC can be added. Users need to
log in Indoor Monitor’s webpage with account (user) and password (1234) to fill in
cameras’ RTSP. You can switch to monitor other devices by clicking arrow or the
6
name above. You can also add more cameras by clicking the icon on the right
upper corner.
6. Phonebook
Click phone Book.
Or go to Dial > Phonebook. Select the name on the phonebook and press dial
button to call.
7. QR Code
Click QR Code and scan by Smart Life app to add this Indoor Monitor to your
phone. Only when the license is filled in Internet-connected Indoor Monitor, QR
code will be available.
Table of contents
Other Dnake Intercom System manuals
