5
USER_MAN_ENG_DFWIECEX
WARNINGS
The purpose of this manual is to inform the user of the dierent operating modes of the weight indicator, the functions of the keys
and the display indications.
It is advisable to carefully follow the instructions for programming the weight indicator;
performing actions not indicated in this manual may impair the proper operation of the scale.
In addition to all the typical features of a high-precision scale, the indicator oers additional user options such as unit of measure
conversion to pounds, net weight/gross weight conversion, setpoint on gross or net weight, input/output weighing, universal
single scale repeater, multi-scale repeater, approved PC weight transmission with alibi memory, +/- tolerance check, sample weight
percentage, weight freeze display, peak detector, weighing totaliser and counter.
These features make it suitable for both industrial use and for legal use in relations with third parties and in trade, satisfying the most
current data transmission and printing requirements by means of its two bidirectional serial outputs.
The indicator is compliant for use in hazardous areas according to IECEx / Atex regulations.
The utmost care has been taken in compiling this manual, but reports of any inaccuracies are always welcome.
The instrument is covered by warranty and MUST NOT BE OPENED WITH BY THE USER under any circumstances.
Any attempt at repair or modify the unit may expose the user to the danger of electric shock and voids any warranty conditions.
Any problem with the unit or the system must be reported to the manufacturer or to the retailer where it was purchased. In any case,
TURN OFF THE POWER SUPPLY before any operation.
The instrument is isolated between the hazardous voltage zone and parts accessible to the user.
• Do not spill liquids on the indicator (except for models with IP65 or higher protection).
• Do not use solvents to clean the indicator.
• Do not expose the instrument to direct sunlight or heat sources
• Place or secure the indicator and platform on a vibration-free base.
• All indicator connections must be made in accordance with applicable regulations in the area and environment of installation.
Anything not expressly described in this manual constitutes improper use of the equipment.
Do not install in an environment where there is a risk of explosion.
The crossed-out wheelie bin symbol on the product indicates that the product, at the end of its working life, must
be taken to the appropriate separate collection centres or returned to the retailer when a new equivalent product
is purchased. Appropriate separate collection of the product for subsequent recycling helps to avoid potential
negative eects on the environment and health and promotes the recycling of materials. Unauthorised disposal of
the product by the user will result in the application of administrative sanctions provided for by law.
INTRODUCTION
