DENT Instruments ROCOIL MV User manual
CONNECTING THE ROCOIL MV
CURRENT TRANSFORMERS TO
THE LINE POWERED ELITEPRO
DENT INSTRUMENTS | 64 NW FRANKLIN AVENUE | BEND, OREGON 97701
P 541.388.4774 | 800.388.0770 | F 541.385.9333 | WWW.DENTINSTRUMENTS.COM
PERFORMANCE UPDATE
rev 072910
NOTE: DO NOT ATTACH THE VOLTAGE LEADS UNTIL THE ROCOIL MV
CURRENT TRANSFORMERS ARE CONNECTED TO THE ELITEPRO METER.
1. Open the levers on the
connector using a screw
driver.
Page 1
2. Place the RED +ve DC
power lead into one
connector and the BLACK-
ve lead into the other
connector.
DENT INSTRUMENTS | 64 NW FRANKLIN AVENUE | BEND, OREGON 97701
P 541.388.4774 | 800.388.0770 | F 541.385.9333 | WWW.DENTINSTRUMENTS.COM
PERFORMANCE UPDATE
Page 2
3. Connect the leads from
the RoCoil mV into the
corresponding connector.
4. Screw the GREEN and
leads into the 8-
Position CT Connector (p/n
*CT-CONN; green Phoenix
connector).
4. Remove the backing from
the VHB tape on the
underside of the connectors
and firmly press onto the
ELITEpro enclosure.
DENT INSTRUMENTS | 64 NW FRANKLIN AVENUE | BEND, OREGON 97701
P 541.388.4774 | 800.388.0770 | F 541.385.9333 | WWW.DENTINSTRUMENTS.COM
PERFORMANCE UPDATE
Page 3
5. The photo, right, shows
three RoCoil mVs correctly
wired and powered by a Line
Powered ELITEpro
instrument.
7. The RoCoil mVs can also
be powered by a 120 VAC US
or 100-240 VAC International
wall transformer.
Table of contents
Other DENT Instruments Measuring Instrument manuals
DENT Instruments
DENT Instruments PowerScout 24 Manual
DENT Instruments
DENT Instruments ELITEpro ELOG 15 User manual
DENT Instruments
DENT Instruments PowerScout 3 HD User manual
DENT Instruments
DENT Instruments powerscout 3037 Manual
DENT Instruments
DENT Instruments PowerScout 24 Manual
DENT Instruments
DENT Instruments PowerScout HD Series Manual
DENT Instruments
DENT Instruments PowerScout 3 Manual
DENT Instruments
DENT Instruments PowerScout 12 HD User manual
DENT Instruments
DENT Instruments PowerScout 3 User manual
