Denon DN-200BR User manual

User Guide (English)

Introduction

DN-200BR is a Bluetooth®audio receiver with professional-grade audio

outputs. It lets you add wireless stereo Bluetooth audio reception to any

professional audio system. Once you pair your Bluetooth device to DN-

200BR, you can send your device’s audio signal out DN-200BR’s

balanced XLR or unbalanced 1/4” (6.35 mm) outputs to your mixer,

loudspeakers, or amplification system.

Please see this guide’s Set up chapter to learn how to integrate DN-

200BR with your audio system, and then refer to the Operation chapter to

start using DN-200BR.

Box Contents

DN-200BR User Guide

Power Adapter Safety & Warranty Manual

Support

For the latest information about this product (system requirements,

compatibility information, etc.) and product registration, visit denonpro.com.

Features

OUTPUT

UNBAL.UNBAL.

BAL.

B LUETOOT H AUD IO RECEIV ER

STATUS PAIR

LEVEL

0dB

DN-200BR

5V 3ADC

456 67 7

1. Power Input: Use the included power adapter to connect this input to

a power outlet. See Setup for more information.

2. Bluetooth Antenna: The antenna receives and transmits the

Bluetooth signal from a paired Bluetooth device. DN-200BR has a

range of up to 82 feet (25 meters).

3. Pair Button: Press and hold this button for 3 seconds to make DN-

200BR available for pairing to a nearby Bluetooth device. See

Operation for more information.

1.8”

(45mm)

5.8”

(149mm)

3.4”

(88mm)

4. Status Light: This LED indicates the DN-200BR’s Bluetooth pairing

status:

• Flashing slowly (approximately twice every 2 seconds): DN-

200BR is not paired to a Bluetooth device.

• Flashing quickly (approximately twice per second): DN-200BR

can be paired to a Bluetooth device.

• Solidly lit: DN-200BR is paired to a Bluetooth device.

See Operation to learn how to pair/unpair a Bluetooth device to/from

DN-200BR.

5. Level Knob: Turn this knob to adjust the output volume level (sent to

the balanced and unbalanced outputs).

6. Outputs (Balanced XLR): These outputs send the audio from a paired

Bluetooth device. Use XLR cables to connect these outputs to your

loudspeakers, mixer, etc. See Set up for more information.

7. Outputs (Unbalanced 1/4” / 6.35mm): These outputs send the audio

from a paired Bluetooth device. Use standard 1/4” (6.35mm) cables to

connect these outputs to loudspeakers, mixer, etc. See Setup for

more information.

Setup

Items not listed under Introduction > Box Contents are sold separately.

1. Use either XLR cables or 1/4” (6.35mm) cables to connect the DN-

200BR’s outputs (balanced or unbalanced) to your loudspeakers,

mixer, amplifier, or other device that accepts line-level inputs (this

device must be powered off).

Important: For stereo operation, make sure all left (L) and right (R)

outputs are connected to left and right inputs, respectively.

2. Use the included power adapter to connect DN-200BR’s power

input to your power source.

Important: Do not use DN-200BR near a microwave oven, which can

interfere with the reception.

3. If you are using a mixer, make sure all of its connections are secure,

and power it on.

4. Power on your loudspeakers last.

Example

OUTPUT

UNBAL.UNBAL.

BAL.

BLU ETOO TH A UD IO R E CE IVER

STATUSPAIR

LEVEL

0dB

DN- 200BR

5V 3 ADC

Mixer

PA loudspeakers Loudspeakers

Power

Smartphone,

tablet, etc.

Operation

You can play audio from an audio device that sends its signal over a

Bluetooth connection (e.g., smartphones, tablet computers, etc.). DN-

200BR uses Bluetooth 2.1 + Enhanced Data Rate (EDR) and has a range

of up to 82 feet (25 meters).

Once you “ pair” your Bluetooth device with DN-200BR, they are

“connected” wirelessly. You can play audio on your Bluetooth device, and

it will be sent out of DN-200BR’s outputs (balanced and unbalanced).

Important:

• DN-200BR will not receive audio from a phone call. While using it, we

recommend disabling your cellular connection, if possible.

• Do not use DN-200BR near a microwave oven, which can interfere

with the reception.

• While DN-200BR is paired with a Bluetooth device, other Bluetooth

devices cannot pair to it. You must unpair (“disconnect”) the current

Bluetooth device from DN-200BR to make it available to others.

To pair your Bluetooth device to DN-200BR:

1. If DN-200BR is off, use the included power adapter to connect its

power input to your power source. The Status Light will flash slowly.

2. Make sure your desired Bluetooth device has its Bluetooth

connectivity on and is within range. DN-200BR will automatically try to

pair with the last-paired Bluetooth device, if any.

If you are using that Bluetooth device again, you can start playing

audio immediately.

If you want to use a different Bluetooth device, continue to Step 3.

3. Press and hold DN-200BR’s Pair button for 3 seconds. When the

Status Light starts flashing quickly, release the Pair button.

4. On your Bluetooth device, enter its Bluetooth settings menu, and

select DN-200BR.

Note: (Some older Bluetooth devices may require you to enter a PIN. If

this is the case, enter 0000 as the PIN.)

5. On your Bluetooth device, start playing audio.

To adjust your volume level, we recommend setting the volume control

of each of your devices in the following order:

i. your Bluetooth device

ii. DN-200BR, using its Level Knob

iii. your mixer, if any (its input channel level[s], then its main

output level)

iv. your loudspeakers

Set each volume level as high as possible without creating distortion

or any “clipping” of the sound.

Important: DN-200BR will not receive audio from a phone call. While

using it, we recommend disabling your cellular connection, if possible.

To unpair your Bluetooth device from DN-200BR, do one of the following:

• Enter your Bluetooth device’s Bluetooth settings menu, and

disconnect from DN-200BR.

• Press and hold DN-200BR’s Pair button for 3 seconds, and then

release it. DN-200BR will unpair from your Bluetooth device and be

available to pair to another one.

Troubleshooting

If you encounter a problem, try doing these things first:

• Make sure all cables and other connected devices are properly and

securely connected.

• Make sure you are using DN-200BR as described in this User Guide.

• Make sure your other devices or media are working properly.

• If you believe DN-200BR is not working properly, check the following

table for your problem and solution.

Problem: Solution: Please see:

Power does not

turn on.

Make sure DN-200BR’s power input is

properly connected to a power outlet

using the included power adapter.

Setup

DN-200BR does

not produce any

sound, or the sound

is distorted.

Make sure all cable and device

connections are secure and correct.

Make sure none of the cables are

damaged.

Make sure the settings on your

Bluetooth device, loudspeaker, mixer,

etc. are correct.

Setup

Problem: Solution: Please see:

Audio from my

Bluetooth device

does not play

through DN-200BR.

Make sure you have properly paired

your Bluetooth device.

Improve the Bluetooth signal

reception by moving your Bluetooth

device closer to DN-200BR. Also,

remove obstacles (walls, furniture,

etc.) so there is a clear line of sight

between your Bluetooth device and

DN-200BR.

Setup and

Operation

Pairing my Bluetooth

device to DN-200BR

requires a PIN.

Enter 0000 as the PIN. (Some older

Bluetooth devices may require you

to enter a PIN.)

Operation

Other manuals for DN-200BR

Table of contents

Popular Receiver manuals by other brands

Garmin

Garmin GA 23 Owner's manual and reference guide

Aiphone

Aiphone PS-12F instructions

IMES

IMES TCS-01CA-PMI Original Operating Instruction

BWI Eagle

BWI Eagle AIR-EAGLE SR Product information bulletin

AMIMON

AMIMON AMN12310 WHDI datasheet

Dual

Dual DMCPA79BT Installation & owner's manual

Sound Associates

Sound Associates SA652P Operation manual

Sherwood

Sherwood NewCastle R-772 Service manual

Audio

Audio A10-RX Series user guide

AllSee

AllSee PushShare PSRV1.1 user manual

DEMAG

DEMAG DRC-DR D2 operating instructions

Teleco

Teleco TVRCL868A02 manual

Bosch

Bosch RF3222E installation instructions

Kramer

Kramer 631R user manual

Xpress

Xpress xmc10 installation guide

JVC

JVC KD-MR1BTS instruction manual

Omega Engineering

Omega Engineering UWTC-REC3 user guide

e-survey

e-survey E300 Pro user manual