Dell PowerEdge T310 User manual
Dell™ PowerEdge™
T310 Systems
Getting Started
With Your System
系统使用入门
Mengaktifkan Sistem Anda
はじめに
시스템 시작 안내서
Dell™ PowerEdge™
T310 Systems
Getting Started
With Your System
Regulatory Model E09S
Regulatory Type E09S001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use
of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data
if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
____________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.;
Intel and Xeon are registered trademarks of Intel Corporation in the U. S. and other countries;
Microsoft, Windows, Windows Server, and Hyper-V are either trademarks or registered trademarks
of Microsoft Corporation in the United States and/or other countries; Red Hat and Enterprise Linux
are registered trademarks of Red Hat, Inc. in the United States and other countries; SUSE is a registered
trademark of Novell, Inc. in the United States and other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
Regulatory Model E09S
Regulatory Type E09S001
May 2009 P/N K087K Rev. A00
Getting Started With Your System 3
Installation and Configuration
WARNING: Before performing the following procedure, review the safety
instructions that came with the system.
Optional – Connecting the Keyboard, Mouse, and Monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable
to plug into each connector. Be sure to tighten the screws (if any) on the
monitor's cable connector.
4Getting Started With Your System
Connecting the Power Cable(s)
Connect the system’s power cable(s) to the system and, if a monitor is used,
connect the monitor’s power cable to the monitor.
Securing the Power Cable(s)
Bend the system power cable(s) into a loop as shown in the illustration and
secure the cable(s) with the provided strap.
Plug the other end of the power cable(s) into a grounded electrical outlet
or a separate power source such as an uninterrupted power supply (UPS)
or a power distribution unit (PDU).
Getting Started With Your System 5
Turning On the System
Press the power button on the system and the optional monitor, if used.
The power indicators should light.
Complete the Operating System Setup
If you purchased a preinstalled operating system, see the operating system
documentation that ships with your system. To install an operating system for
the first time, see the installation and configuration documentation for your
operating system. Be sure the operating system is installed before installing
hardware or software not purchased with the system.
Supported Operating Systems
• Microsoft
®
Windows
®
Server 2008 R2 Standard and Enterprise (x64)
Editions
• Microsoft Windows Server
®
2008 Standard and Enterprise (x86)
Editions with SP2
• Microsoft Windows Server 2008 Standard and Enterprise (x64) Editions
• Microsoft Windows Server 2008 Standard, and Enterprise (x86) Editions
• Microsoft Windows Small Business Server 2008 Standard and
Premium (x64) Editions
6Getting Started With Your System
• Microsoft Windows Essential Business Server 2008 Standard and
Premium (x64) Editions
• Microsoft Windows Server 2003 R2 Standard and Enterprise (x64)
Editions with SP2
• Microsoft Windows Server 2003 R2 Standard and Enterprise (x86)
Editions with SP2
•RedHat
®
Enterprise Linux
®
ES (Version 5.3) (x86)
• Red Hat Enterprise Linux ES (Version 5.3) (x86_64)
•SUSE
®
Linux Enterprise Server 11 (x86_64)
• Microsoft Windows Server 2008 Hyper-V™
NOTE: For the latest information on supported operating systems,
see www.dell.com.
Other Information You May Need
WARNING: See the safety and regulatory information that shipped with your
system. Warranty information may be included within this document or as a
separate document.
•The
Hardware Owner’s Manual
provides information about system
features and describes how to troubleshoot the system and install or
replace system components. This document is available online at
support.dell.com
.
• Any media that ships with your system that provides documentation and
tools for configuring and managing your system, including those
pertaining to the operating system, system management software, system
updates, and system components that you purchased with your system.
NOTE: Always check for updates on support.dell.com and read the updates
first because they often supersede information in other documents.
Getting Started With Your System 7
Obtaining Technical Assistance
If you do not understand a procedure in this guide or if the system does not
perform as expected, see your Hardware Owner’s Manual. Dell™ offers
comprehensive hardware training and certification. See
www.dell.com/training for more information. This service may not be offered
in all locations.
NOM Information (Mexico Only)
La información que se proporciona a continuación aparece en el dispositivo
descrito en este documento, en cumplimiento de los requisitos de la Norma
Oficial Mexicana (NOM):
Technical Specifications
Importador:
Número de modelo: E09S
Voltaje de
alimentación:
100-240 V CA
Frecuencia: 50/60 Hz
Consumo eléctrico: 5,8–2,9 A
Processor
Processor type One quad-core Intel®Xeon®processor
Expansion Bus
Bus type PCI Express Generation 2
Expansion slots Slot1: PCIe x8 (x8 routing) half-length
Slot2: PCIe x16 (x8 routing) full-length
Slot3: PCIe x8 (x4 routing) half-length
Slot4: PCIe x1 (x1 routing) half-length
Slot5: PCIe x1 (x1 routing) half-length
8Getting Started With Your System
Memory
Architecture 800-MHz, 1066-MHz, or 1333-MHz DDR3
registered or unbuffered Error Correcting
Code (ECC) DIMMs.
Memory module sockets Six 240-pin
Memory module capacities 1 GB, 2 GB, 4 GB, or 8 GB
Minimum RAM 1 GB
Maximum RAM 32 GB
Drives
Hard drives Up to four 3.5-inch hot-plug SAS or
SATA internal drives
or
Up to four 3.5-inch cabled SAS or
SATA internal drives
or
Up to four 2.5-inch hot-plug SAS or
SSD internal drives in a 3.5-inch carrier.
Optical drive Optional internal SATA DVD-ROM or
DVD+/-RW
Optional external USB DVD-ROM
NOTE: DVD devices are data only.
Tape drive One optional internal half height tape
backup device
Other manuals for PowerEdge T310
7
Table of contents
Languages:
Other Dell Server manuals
Dell
Dell PowerEdge 2970 User manual
Dell
Dell PowerEdge 8450 Technical manual
Dell
Dell PowerEdge 1750 Instruction Manual
Dell
Dell PowerEdge FN410S User manual
Dell
Dell EMC ScaleIO Ready Node 14G User manual
Dell
Dell PowerEdge 830 Guide
Dell
Dell PowerEdge R210 II Quick start guide
Dell
Dell S5000 Series User manual
Dell
Dell POWEREDGE R515 Quick start guide
Dell
Dell PowerEdge T320 Quick start guide
Dell
Dell PowerEdge R210 II User manual
Dell
Dell Force10 MXL Blade User manual
Dell
Dell EMC PowerEdge R940 Quick start guide
Dell
Dell EMC PowerEdge XR11 Manual
Dell
Dell PowerEdge UPS 500T User manual
Dell
Dell Force10 MXL Blade User manual
Dell
Dell PowerEdge C6220 II User manual
Dell
Dell DX6000 User manual
Dell
Dell PowerEdge C1100 User manual
Dell
Dell Dimension 2200 Parts list manual
