deconta airsampler 15 S User manual
Instruction manual
Air sampling device
airsampler 15 S / 30 S
Manufacturer: deconta GmbH
Im Geer 20, 46419 Isselburg
Description/Type-No.: airsampler 15 S Type 485
airsampler 30 S Type 486
Serial-No.: .................
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 2
Table of contents
on page
1 Introduction 3
2 Basic safety advice 4
3 Transport 5
3.1 Delivery 5
3.2 Transport 5
4 Scope of delivery 5
5 Technical description 6
6 Technical data 7
6.1 Pump power airsampler 15 S 7
6.2 Pump power airsampler 30 S 7
6.3 Technical data 7
7 Initial operation 8
8 Display indications 9
9 Setting / Operation 10
9.1 Possible settings / Code chart 11
10 Optional expansion module 12
10.1 Memory module 12
11 Declaration of conformity 14
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 3
1 Introduction
Dear customer,
Thank you for choosing a deconta product!
With this device you obtain a practical solution with simple operation, which was
completed in a compact and functional way.
The deconta products guarantee:
Stability, long life and serviceability on site
Mechanics with „kick“
Pleasing design
The copyright of this instruction manual remains with deconta. This manual is intended
for assembly, operation and maintenance personnel. It contains instructions and drafts of
technical nature which may neither be distributed nor used in any unauthorised way for
competitive purposes or passed on to others.
For more information, please visit our website www.deconta.com
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 4
2 Basic safety advice
The handling of the appliance technology is only allowed for instructed staff. The exact
knowledge of the instruction manual is an important condition for your staff in regard to
the handling of the machine.
2.1 Intended use
As an operator, you are obliged by deconta to follow the instruction manual and to use
this engineered technology equipment only in accordance with the regulations and its
suitability! In the event of non-observance, deconta assumes no liability.
2.2 Operations
In order to ensure the safety during the operation of the device, you absolutely have to
have to note the following:
Do not place in an explosive area
Necessary repairs, maintenance and cleaning, in particular in the field of electrical
equipment has to be realized only by qualified staff
The safety and protective equipment has to be kept in perfect functioning.
The indicated safety instructions have to be kept in a readable state and have to
be followed.
In order to ensure safety, any changes on the machine are prohibited.
ATTENTION!
The device is not suitable for the use in a condensed, corrosive, flammable and
explosive compartment air. The ambient and medium air temperature must be
situated in a sector from -10 up to+50°C
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 5
3 Transport
3.1. Delivery
Unless agreed otherwise, the lock system is packed completely and securely for
transport by deconta. Transport damages have to be documented at once during the
handing over of the carrier or another supplier. Please note the possible damages
additionally on the way bill. To avoid damages caused by improper handling or
carelessness, it is common practice to handle the Transport with care.
3.2 Transport
In order to protect the device during the transport, it is located in a transport box with
handle.
Care must be taken to ensure the device is not exposed to impacts or blows, because
otherwise the function and safety of the device cannot be guaranteed.
4 Scope of delivery
If no other agreements have been taken, the scope of delivery of an automatic phone
announcement unit consists of:
Device in a case with shoulder strap
Pluggable measuring rod system/insertion adapter
Power cable
Instruction manual
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 6
5 Technical description
The appliance for air sampling air sampler is used to aspirate a defined volume flow
through an air sampling filter. The filters are analysed in a laboratory
The permanent regulation of the volume flow, as well as calibrated sensors and a laminar
element flow constitute the base for precise measurements. Measured are: Volume flow,
temperature, relative humidity, absolute and barometric pressure. The time of
measurement lost through power failure is re-established.
A dry contact enables the connection to an external alert giver or to a mobile phone. The
contact switches according to the adjustment by exceeding of different parameters, by
power failure or at the end of a measurement.
The combination between a simple operation and a high technical standard makes the
airsampler a powerful measuring appliance, which fulfils by far all demands of the air
measurement mobile or stationary.
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 7
6 Technical data
6.1 Pump power airsampler 15 S
6.2 Pump power airsampler 30 S
6.3 Technical data:
Length: 430 mm
Width: 325 mm
Height: 165 mm
Weight: 10,5 kg
Power connection: 230 V
Switched power: Dry contact 230 V / 1,5 A
Measurement connections: Rods with tube 8 x 1 mm
Volume flow 15 S: 2 - 15 l/min
Volume flow 30 S: 4 - 30 l/min
max. negative pressure: 500 mbar
Capacity of memory: via optional module
Operation: LCD- Display, keyboard
Temperature range: 0 – 45 °C
0
5
10
15
20
25
30
35
0 100 200 300 400 500 600 700 800
mbar
l/min
0
5
10
15
20
0 100 200 300 400 500 600 700 800
mbar
l/min
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 8
7 Initial operation
Set up the device
Put together the rods and insert them onto the airsampler port
Connect the monitor
Turn on the device
Now it is ready for use.
Monitor
Measuring rods
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 9
8 Display-Indications
After switching-on the device, 3 pieces of information appear on the upper line of the
display:
Top row left => Device status
Possible status indications (S followed by 3 numbers):
First digit 1 airsampler 15 S
First digit 2 airsampler 30 S
Second digit 2 Memory module present (optional)
Third digit always 0, no function
Top row middle => The actual time
Top row right => Alert status
Possible alert status indications:
First digit 1 always 1, no function
Second digit 0 Device is inactive
Second digit 1 active with timing, lead time in progress
Second digit 2 active with timing, measuring time in progress
Second digit 3 active with timing, measuring time is expired
Second digit 4 active without timing
Third digit 0 no results
Third digit 1 Voltage drop
Third digit 2 Shut down pressure exceeded
Third digit 3 Over temperature
Third digit 4 Minimum pressure fallen short
Underneath the upper row, the measuring values for volume flow, temperature,
humidity and absolute pressure are displayed
Alert statusTime
Device status
Set point
Volume flow
Temperature
Actual value
volume flow
Absolute pressure
Humidity
Instruction manual
Air sampling device airsampler 15 / 30 S
Page 10
9 Settings / Operation
Adjustments are always carried out according to the same procedure via the keypad:
Push the key # => C will appear on the display
Enter the code for the relevant adjustment (see code chart below)
Push the key # => The actual adjusted value is indicated
Enter a new value
Confirm the entry with the key #
This manual suits for next models
1
Table of contents
