Danfoss Old ICAD 600 series User manual

24 Volt d.c.

ONLY

Quick Start Guide

ICAD 600/900/1200

Ref. Colour Description

A Black – Common Alarm

B Brown – ICM fully open

C Red – ICM fully closed

D Orange – GND ground

E Yellow + 0/4 - 20 mA Input

F Green + 0/2-10V input or digital

input for on/oﬀ control

G Blue + 0/4 - 20 mA Output

I Black + Fail safe supply

Battery / UPS* 19 V d.c.

II White + Supply voltage

24 V d.c.

III Brown –

Digital

Ouput

* Uninterruptable Power Supply

Terminal box -

not supplied

by Danfoss

1 2

24 Volt d.c.

ONLY

Before you

start using ICAD:

Tighten CW

Quick Start Guide

Oil

Valve label ID:

Valve size setup (mandatory)

Programming the ICAD

Changing analogue input signal (optional)

Decrease

value

Edit /

Enter

Increase

value

Hold down for

2 seconds to enter

programming mode.

; 01 ; 10

Press and

go to parameter 10.

Press

Press until

you reach 11 (pass-

word). Press

Press until

you reach parameter 26

Press

11 ; 26

Press or

to select ICM size.

Press

ICM / ICAD is now

calibrating.

0; 26 CA

Hold down for

2 seconds to exit

programming mode.

1: ICM 20 with ICAD 600

2: ICM 25 with ICAD 600

3: ICM 32 with ICAD 600

4: ICM 40 with ICAD 900/1200

5: ICM 50 with ICAD 900/1200

; 01

Hold down for

2 seconds to enter

programming mode.

; 03

Press until you

reach parameter 03.

Press

Press or

to select analogue

input signal.

1: 0-20 mA

2: 4-20 mA*

3: 0-10 V

4: 2-10 V

2; 03

Press

If A3 alarm occurs

the analogue input

signal is out of range.

For further functions,

programming possibilities

and factory settings;

please see ICAD instruction.

24 Volt d.c. ONLY

2 DKRCI.PI.HV0.J2.02 / 520H4887 / 027R9801 © Danfoss A/S (AC-SMC/MWA), 05 - 2011

Note:

If the keypad is not operated within 20 seconds;

time out will automatically exit programming mode.

Hold down for

2 seconds to exit

programming mode.

* default factory setting

; 03

ICM 20 ICM 25-65 ICM 100-150

6: ICM 65 with ICAD 900/1200

7: ICM 100 with ICAD 1200

8: ICM 125 with ICAD 1200

9: ICM 150 with ICAD 1200

When powering up the ICAD, A1 will ﬂash in the display

Factory reset of ICAD

Disconnect power 

Press down and 

simultaneously while

reconnecting power 

Release and 

Note:

If factory reset has been performed the

ICAD will start ﬂashing A1 in the display.

Other manuals for Old ICAD 600 series

This manual suits for next models

Other Danfoss Controllers manuals

Danfoss

Danfoss VLT FC 100 User manual

Danfoss

Danfoss VLT AQUA Drive FC 202 User manual

Danfoss

Danfoss Old ICAD 600 series User manual

Danfoss

Danfoss NovoCon S User manual

Danfoss

Danfoss PCVA User manual

Danfoss

Danfoss pved-cl Manual

Danfoss

Danfoss AMI 140 Series User manual

Danfoss

Danfoss AK-PC 530 User manual

Danfoss

Danfoss VLT AutomationDrive FC 300 Guide

Danfoss

Danfoss ECL Comfort 210 User manual

Danfoss

Danfoss MCI 50-3 I-O User manual

Danfoss

Danfoss PVE 4 Series User manual

Danfoss

Danfoss Danfoss Link User manual

Danfoss

Danfoss FCM305 56 User manual

Danfoss

Danfoss AME 55QM User manual

Danfoss

Danfoss VLT series User manual

Danfoss

Danfoss EKC 531D1 User manual

Danfoss

Danfoss 101N0715 User manual

Danfoss

Danfoss MCX User manual

Danfoss

Danfoss AK-CC 550A User manual

Danfoss

Danfoss VLT HVAC Drive FC 102 User manual

Danfoss

Danfoss EIM 365 User manual

Danfoss

Danfoss AMV 20 SL User manual

Danfoss

Danfoss ADAP-KOOL AK-PC 781 Guide

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual