Danfoss MMIGRS2 User manual

520H9703

Installation Guide

MCX rooftop controller

Instruction guide

DKRCC.PI.RI0.L1.22 / 520H9703 | 1

DKRCC.PI.RI0.L1.22

520H9703

MCX152V

Ordering no.

080G0304 = 110/230vac

Identication:

Connection:

MCX08M (Optional)

Ordering no.

080G0029 = 110/230vac

MMIGRS2 (Optional)

Ordering no.

080G0294

IP 20

-20 – 60 °C (0 – 140 °F)

RH max. 90% non condensing

CE COMPLIANCE

This product is designed to comply with the following EU standards:

Low voltage guideline: 73/23/EEC Electromagnetic compatibility EMC:

89/336/EEC and with the following norms:

EN61000-6-1, EN61000-6-3 (immunity for residential, commercial and

light-industrial environments)

EN61000-6-2, EN61000-6-4 (immunity and emission standard for

industrial environments)

EN60730 (Automatic electrical controls for household and similar use)

UL APPROVAL

UL ﬁle: E31024

Supply Voltage

85 – 265 V AC, 50/60 Hz

Maximum power consumption: 27 W, 48 VA

Insulation between power supply and the extra-low

voltage: reinforced

Plugs normally not used

Stepper Motor 1, Stepper Motor 2, Stepper Backup,

RS485-2, Digital Input 18

Modbus

It is important that the installation of the data

communication cable be installed correctly.

Remember to terminate each end of the bus.

See separate literature No. RC8AC.

DO - Digital outputs, 15 pcs. DO1 – DO15

DO1 - DO15, all are relays, no solid state relays

The relays are de-rated to the speciﬁed values

AO - Analog output, 6 pcs. AO1 – AO6

Outputs are 0 – 10 V DC by default

AI - Analog Inputs, 14 pcs. AI1 – AI14

All temperature sensors default to PT1000, Pressure

transducers default to 0.5 – 4.5 V DC ratiometric with

5 V DC supply. All other inputs are 0 – 5 V DC by default

DI - Digital switch inputs DI1 – DI17

All Dry contacts except DI17,

(24 V AC or 230 V AC driven)

Technical data:

2 |DKRCC.EI.RL0.I1.02 / 520H9646 © Danfoss | DCS (za) | 2015.08Installation guide | MCX rooftop controller

110 mm - 4.33 in.

280 mm - 11.02 in. 63 mm - 2.48 in.

Dimensions:

Modbus topology:

AK-SM800:

The cable must be EIA485 rated. The cable is connected from controller to controller, and no branches are allowed on the

cable. If the cable length exceeds 1200 m a repeater must be inserted. One repeater must be added for every 32 controllers.

If the data communication cable runs through an electrically noisy environment which impairs the data signal, one or more

repeaters must be added to stabilise the signal.

When conﬁguring Modbus devices on the control bus, the highest device address that can be used is 124

(max 120 modbus control devices in total - max 45 MCX RTC).

The wires are looped from device to device. A is connected to A and B is connected to B. The screen must be connected to the

system device, all controller and any repeaters. A screen must always be looped from device to device.

The screen must not be connected to anything else.

See AK-SM800 User Guide for system 485 wiring instructions.

Manual can be found at: http://food-retail.danfoss.com/knowledge-center/software/ak-sm-800/

Be sure to conﬁgure the Modbus repeater AKA 222 (code#084B2240) to the correct baud rate.

MCX-RTU baud rate must be set to 38.4 K when used with the AK-SM800. MCX-RTU cannot be on the same 485 bus with SLVs.

Termination

Repeater

DKRCC.EI.RL0.I1.02 / 520H9646 | 3© Danfoss | DCS (za) | 2015.08 Installation guide | MCX rooftop controller

Wiring Diagram MCX152V -bottom and top

STEPPER

MOTOR 2

RS485-1

SD/MMC

ST2 4

ST2 3

ST2 2

ST2 1

RS485-2

MEMORY CARD

MCX152V TOP

ANALOG OUTPUT 1-6 ANALOG INPUT 1-7

ANALOG INPUT 8-14

STEPPER

MOTOR 1

ST1 4

ST1 3

ST1 2

ST1 1

AO 6

AO 5

AO 4

COM

AO 3

AO 2

AO 1

COM

15V+

AI 7

AI 6

AI 5

5V+

AI 4

AI 3

AI 2

AI 1

Not used

Damper AO

VS compressors 4

VS compressors 3

Modbus connection

Mixed Air (PT1000)

Outdoor Temp (PT1000)

Fan CT (0 – 5 V DC)

Compr 1 Press (5 V DC)

Compr 2 Press (5 V DC)

Compr 3 Press (5 V DC)

Compr 4 Press (5 V DC)

DP Outside/Mixed Air

Zone CO2(0 – 5 V DC)

Outdoor RH(0 – 5 V DC)

Zone RH(0 – 5 V DC)

Return Air(PT1000)

Supply Air(PT1000)

Zone Temp(PT1000)

COM

15V+

AI 14

AI 13

AI 12

5V+

AI 11

AI 10

AI 9

AI 8

COM 1

D1 +

D1 -

COM 2

D2 +

D2 -

VS compressors 2

VS compressors 1

Fan AO

Contact info:

www.danfoss.com

Installation guide | MCX rooftop controller DKRCC.EI.RL0.I1.02 / 520H9646 | 4

DIGITAL INPUT 18 DIGITAL OUTPUT 9-12 DIGITAL OUTPUT 13-15

STEPPER BACKUP DIGITAL INPUT 1-8 DIGITAL INPUT 9-16

POWER

SUPPLY

MCX152V BOTTOM

CANCAN-RJ ETHERNET DIGITAL INPUT 17

COM

CANL

CANH

R120

COM 17

DI 17

DIGITAL OUTPUT 6-8

NO 8

C 8

NO 7

C 7

NO 6

C 6

DIGITAL OUTPUT 1-5

NO 3

C 3

NO 2

C 2

NO 5

C 5

NO 4

C 4

NO 1

C 1

CAN-RJ

ETH

DI 17H

Input Voltage

110 – 230 V AC

Optional IO Expansion

Optional - Remote Display

Not Used

Cool 4 Proof

Aux Heat 4 (N.O.)

Aux Heat 3 (N.O.)

Aux Heat 2 (N.O.)

Aux Heat 1 (N.O.)

Cool 4 (N.O.)

Cool 3 (N.O.)

Cool 2 (N.O.)

Cool 1 (N.O.)

Stepper Backup

NOT USED

Fan Proof

Phase Loss

Shutdown 1

Shutdown 2

Fan Drive Fault

Compr 1 Drive Fault

Compr 2 Drive Fault

Compr 3 Drive Fault

Compr 4 Drive Fault

Filter Clogged Fault

Damper Override

Title 24

Schedule Override

Cool 1 Proof

Cool 2 Proof

Cool 3 Proof

Reheat (N.O.)

Damper (N.O.)

Heat Reclaim 1 (N.O.)

Heat Pump (N.O.)

Fan Low Speed (N.O.)

Fan High Speed (N.C.)

COM

+ BATT

15V+

COM

DI 9

DI 10

DI 11

DI 12

COM

DI 13

DI 14

DI 15

DI 16

COM

DI 1

DI 2

DI 3

DI 4

COM

DI 5

DI 6

DI 7

DI 8

DI 18H

DI 18

COM 18

C 9

NO 9

C 10

NO 10

C 11

NO 11

C 12

NO 12

C 13

NO 13

NC 13

C 14

NO 14

NC 14

C 15

NO 15

NC 15

Wiring Diagram MCX152V -bottom and top

Other manuals for MMIGRS2

This manual suits for next models

Other Danfoss Controllers manuals

Danfoss

Danfoss AK-PC 351 User manual

Danfoss

Danfoss ECL Comfort 310 User manual

Danfoss

Danfoss 102 User manual

Danfoss

Danfoss VLT AutomationDrive FC 300 User manual

Danfoss

Danfoss VLT HVAC Drive FC 102 User manual

Danfoss

Danfoss VLT MCD 200 User manual

Danfoss

Danfoss EKC 202B User manual

Danfoss

Danfoss VLTAutomationDrive FC 360 User manual

Danfoss

Danfoss FP975 User manual

Danfoss

Danfoss AK-PC 520 User manual

Danfoss

Danfoss VLT Micro Drive User manual

Danfoss

Danfoss VLT MCD 600 User manual

Danfoss

Danfoss Danfoss Link User manual

Danfoss

Danfoss PVE 4 Series Manual

Danfoss

Danfoss ICAD 600A User manual

Danfoss

Danfoss MCI 3 User manual

Danfoss

Danfoss DEVIreg Multi User manual

Danfoss

Danfoss Link HC User manual

Danfoss

Danfoss VLT 5000 User manual

Danfoss

Danfoss VACON 100 industrial User manual

Danfoss

Danfoss Old ICAD 600 series User manual

Danfoss

Danfoss ADAP-KOOL AK-PC 551 User manual

Danfoss

Danfoss PN 16 User manual

Danfoss

Danfoss RT 5 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual