D-Link SECURICAM Network DCS-900W User manual
DCS-900W
Internet Camera
Building Networks for People
(10/04/04)
Manual
Version 1.40
2
Contents
Package Contents ...............................................................3
Introduction ..........................................................................4
Hardware Installation............................................................9
Security ..............................................................................10
Using the Setup Wizard .....................................................11
DCS-900W Configuration..................................................17
Installing the DCS-900W Behind a Router........................27
IPView Lite Application Installation ....................................41
IPView Lite.........................................................................46
Uninstall IPView Lite Application........................................78
Appendix (FAQ, Troubleshooting, How to Ping Your IP
Address Time Zone Table, Active X Installation) ..........80
Technical Specifications ....................................................93
Contacting Technical Support............................................95
Warranty ...................................... .................................... ...96
Registration........................................................................99
3
Package Contents
Package Contents:
If any of the above items are missing, please contact your reseller.
OneDCS-900WInternetCamera
OneInstallationCD-ROM
One802.11bAntenna
OneACpower adapter
OneCameraStand
OneCategory 5 EthernetCable
Local Area Network: 10Base-TEthernet or 100BaseTX Fast Ethernet
Wireless LocalArea Network: 802.11b Wireless Router orAccess Point
Recommended: PC, Mac or Notebook to access the Internet Camera
Web Configuration
• JavaEnabledandCompliant Web Browser (recommended)
•CPU: Pentium III, 450MHz or above
•Memory Size: 128MB recommended
• VGAcard resolution: 800x600or above
IPView Lite Configuration
• Windows XP, Me, 2000, 98SE
•CPU: Pentium III, 850MHz or above
•Memory Size: 128MB (256MB recommended)
•VGA card resolution: 800 x 600 or above
System Requirements:
4
Introduction
Congratulationson your purchase ofthe DCS-900W Internet Camera! TheDCS-900W
is a versatile and unique solution for your small office or home. Unlike a PC Camera,
the DCS-900W is a stand-alone system with a built-in CPU and Web server that trans-
mits high quality video images for monitoring. The DCS-900W can be accessed re-
motely, and controlled from any PC/Notebook over the Intranet or Internet via a web
browser.Thesimple installationprocedure and intuitiveweb-based interface offereasy
integration with your Ethernet/Fast Ethernet or 802.11b wireless network. The DCS-
900W also comes with remote monitoring capability for a complete and cost-effective
home security solution.
Features & Benefits
Simple to Use
TheDCS-900Wisastand-alonesystemwithabuilt-inCPU,requiringnospecialhardware
or software such as PC frame grabber cards. The DCS-900W supports both ActiveX
modeforInternetExplorerandJavamodeforInternetExplorerandNetscapeNavigator.
All that is required is a computer with current Web browser software.
Supports a Variety of Platforms
Supporting TCP/IP networking, HTTP, and other Internet related protocols, the DCS-
900Wcanbe utilized inamixed operating systemenvironmentsuch as Windows,Unix,
and Macintosh. It can also be integrated easily into other Internet/Intranet applications
becauseof its standards-based features.
802.11b Wireless or Ethernet/Fast Ethernet Support
The DCS-900W offers both 802.11b wireless and Ethernet/Fast Ethernet connectivity,
making the DCS-900W easy to integrate into your existing network environment. The
DCS-900W works with a 10Mbps Ethernet based network or 100Mbps Fast Ethernet
basednetworkfortraditionalwiredenvironmentsandworkswith802.11broutersoraccess
points for added flexibility.
5
Features & Benefits (continued)
Web Configuration
Using a standard Web browser,Administrators can configure and manage the Internet
Cameradirectly from itsownWeb page viathe Intranet orInternet. This means youcan
access your DCS-900W at anytime from anywhere in the world!
Remote Monitoring Utility
The IPView Lite application adds enhanced features and functionality for the Internet
Cameraand allowsadministrators to configure and access the Internet Camera from a
remotesite via Intranet or Internet. Other features include image monitoring, recording
images to a hard drive, enabling motion detection, updating firmware, viewing up to 4
cameras on one screen, and taking snapshots.
Broad Range of Applications
With today’s high-speed Internet services, the Internet Camera can provide the ideal
solution for live video images over the Intranet and Internet for remote monitoring. The
Internet Camera allows remote access from a Web browser for live image viewing and
allows the administrator to manage and control the Internet Camera at anytime, from
anywhereinthe world. Many applicationsexist,includingindustrialandpublicmonitoring
of homes, offices, banks, hospitals, child-care centers, and amusement parks.
6
EthernetCable Connector
TheDCS-900WfeaturesanRJ-45connectorforconnectionsto10Base-TEthernetcabling
or100Base-TXFastEthernetcabling (which should be Category 5 UTP cable). The port
supportsthe NWayprotocol,allowingtheDCS-900Wto automaticallydetectornegotiate
the transmission speed of the network.
DC Power Connector
The DC power input connector is labeled DC 5V with a single jack socket to supply
powertothe DCS-900W.
Reset Button
Reset will be initiated when the reset button is pressed once and Power LED begins to
flash.
Factory Reset will be initiated when the reset button is pressed continuously for three
seconds or when the Power LED begins to light up. Release the reset button and the
Power LED will begin to flash indicating that the DCS-900W’s settings are reverting
back to the factory settings. The IP address will also return to the default setting of
192.168.0.20.
Connections
Rear Panel view
Ethernet Cable
Connector
ResetButton
802.11bAntenna
802.11b Antenna
TheDCS-900Wfeatures an 802.11b wirelessantennafor802.11b wirelessconnectivity
to your existing wireless network. The DCS-900W can be used in conjuction with an
802.11b compliant access point or router.
DCPowerConnector
7
Connections (continued)
Bottom Panel view
Stand Mount
8
LEDS
LED stands for Light-Emitting Diode.
Power LED
The Power LED is positioned on the right side of the DCS-900W lens. Steady green
confirmsthat theDCS-900W is powered ON.
Note:
There are three settings for the Power LED for monitoring purposes: Normal / Off /
Dummy. Please refer to the DCS-900W Camera Configuration section on P. 24 for
detailedinformation and usage.
LAN LED
TheLAN LED is positionedon the rightside of the DCS-900W’slens. It islocated below
thePower LED.
Steady orange confirms a good connection to the LAN.
Dependingon the datatraffic, the LEDwill begin toflash to indicatethat the DCS-900W
isreceiving/transceiving from/to the LANnetwork.
Front view
Power LED
LANLED
9
Hardware Installation
Connect the Ethernet Cable
Connectthe included Ethernet cable to the network
cable connector located on the back panel of the
DCS-900W and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input
connectorlocated on therearpanel of the
DCS-900W and connect it to your local power supply.
Note:Power source is confirmedwhenthe green LED
Power Indicator located to the right of the lens on the
DCS-900Wisilluminated.
Attach the Swivel Stand
Locate the stand mount on the bottom of the DCS-
900W and screw on the swivel stand.
Attach the Antenna
Locatetheantenna included with your DCS-900Wand
attach it to the antenna connector located on the back
oftheDCS-900W.
Network Connectivity is confirmed when the orange LED Indicator on the DCS-900W
located below the Power LED is illuminated.
10
Security
To ensure the highest security and prevent unauthorized usage of the DCS-900W, the
Administrator has the exclusive privilege to create all users. The DCS-900W supports
multi-level password protection/access that can be restricted by the Administrator for
defined userswho have a User Name and User Password.
TheAdministrator can release apublicUser Name and Password so thatwhen remote
usersaccess theDCS-900W theywill beallowed toview theimages transmittedby the
DCS-900W.
Note:
When the DCS-900W is used for the first time, it is highly recommended that the
Administrator set the Admin ID and Admin Password to constrain user access to the
DCS-900W since the Default settings are Null String (no password). Once the ID and
Password are defined, only the Administrator has access to the management of the
DCS-900W. This procedure should be done as soon as possible since the security
featuresofthe DCS-900Wwill not be enableduntilthe Admin ID and Admin Password
isdefined.
Other manuals for SECURICAM Network DCS-900W
1
Table of contents
Other D-Link IP Camera manuals
D-Link
D-Link DCS-6220 User manual
D-Link
D-Link SECURICAM Network DCS-3220G User manual
D-Link
D-Link SECURICAM Network DCS-6620 User manual
D-Link
D-Link DCS-5030L User manual
D-Link
D-Link WIRELESS G DCS-950G User manual
D-Link
D-Link DCS-930-A2 User manual
D-Link
D-Link SECURICAM Network DCS-2100G User manual
D-Link
D-Link DCS-933L Cloud Camera 1150 User manual
D-Link
D-Link SECURICAM Network DCS-3220G User manual
D-Link
D-Link DCS-2310L User manual
D-Link
D-Link DCS-942L Manual
D-Link
D-Link DCS-942L User manual
D-Link
D-Link DHA-390 User manual
D-Link
D-Link DCS-5020L Manual
D-Link
D-Link DCS-942L Installation guide
D-Link
D-Link DCS-5220 User manual
D-Link
D-Link SECURICAM Network DCS-2100+ User manual
D-Link
D-Link SECURICAM Network DCS-2120 User manual
D-Link
D-Link Securicam Network DCS-2000 User manual
D-Link
D-Link DCS-6620G - Network Camera User manual
