Cornelius ED250 PRO GATE Technical specifications

Table of contents

Other Cornelius Ice Maker manuals

Cornelius

Cornelius ICE MAKER User manual

Cornelius

Cornelius P/N 629083202 User manual

Cornelius

Cornelius P/N 629087914 User manual

Cornelius

Cornelius Xtreme 322 Series User manual

Cornelius

Cornelius XTREME 631805001 Setup guide

Cornelius

Cornelius Xtreme 322 Series Setup guide

Cornelius

Cornelius Quantum 1000 User manual

Cornelius

Cornelius Nordic CCU0150 User manual

Cornelius

Cornelius EVAPORATOR CONVERSION KIT WCC700 User manual

Cornelius

Cornelius P/N 620046011 User manual

Cornelius

Cornelius CMP 600-30 User manual

Cornelius

Cornelius IMD GLACIER 500-30 User manual

Cornelius

Cornelius XAC1444 Installation guide

Cornelius

Cornelius UC 701 Series Manual

Cornelius

Cornelius CHD22 Manual

Cornelius

Cornelius Enduro-300 IntelliCarb User manual

Cornelius

Cornelius 500 - Series Manual

Cornelius

Cornelius 2306 User manual

Cornelius

Cornelius Remcor 620037007 User manual

Cornelius

Cornelius Nordic CCM1030 User manual

Cornelius

Cornelius XWC1230 User manual

Cornelius

Cornelius REMCOR TJ400 User manual

Cornelius

Cornelius IACS224 User manual

Cornelius

Cornelius Series 200 User manual

Popular Ice Maker manuals by other brands

Hoshizaki

Hoshizaki KMD-460MWJ instruction manual

Sub-Zero

Sub-Zero 315I Planning information

Unold

Unold 48945 Instructions for use

Kenmore

Kenmore 2217402A Use & care guide

GE

GE XPIO43SCSS owner's manual

Hoshizaki

Hoshizaki KMD-901MAH Specifications

Whynter

Whynter FIM-450HA instruction manual

U-Line

U-Line UMCR014-SC01A User guide & service manual

Andrew James

Andrew James AJ000522 manual

Scotsman

Scotsman CME1356 user guide

Scotsman

Scotsman ACM 25 Service manual

Kärcher

Kärcher IP 120 manual

U-Line

U-Line SS1095 Quick referenc guide

Maytag

Maytag MIM1554WRS - Ice Maker User instructions

Hoshizaki

Hoshizaki KM-630MAH instruction manual

Princess

Princess Yonanas user manual

Unold

Unold 48946 Instructions for use

Electrolux

Electrolux E15IM60GP Factory parts catalog

®

Publication Number: TP01054PMC - 1 - Rev. 02/03

Copyright © 2003 www.cornelius.com

Cleanliness/Facility and Equipment Maintenance

ED250 PRO GATE - Cleaning Procedures

Supplies Equipment Needed

• Two-compartment Pail

• Two Clean Sponges or towels

Products Needed

Damon Procter & Gamble

D.C. Cleaner Professional Strength Dawn

Ster-O-Kem Clean Quick Liquid Quaternary Sanitizer

WARNING: DISCONNECT POWER BEFORE CLEANING! DO NOT USE METAL SCRAPERS,

SHARP OBJECTS OR ABRASIVES ON THE ICE STORAGE HOPPER, TOP COVER,

AND THE AGITATOR DISK, AS DAMAGE MAY RESULT. DO NOT USE SOLVENTS

OR OTHER CLEANING AGENTS, AS THEY MAY ATTACK THE PLASTIC METAL.

Daily CLEAN EXTERIOR SURFACES

Step Action

1. Remove the cup rest from the drip tray and remove any foreign material.

2. Wash the drip tray with cleaning solution. Rinse drip tray with clean water and allow the solu-

tion to run down the drain.

3. Check the drip tray for proper drainage.

4. Wash the cup rest with cleaning solution and rinse in clean water. Install the cup rest in the

drip tray.

5. Clean all exterior surfaces of the Unit with the cleaning solution, then rinse with clean water

and dry with paper towels or clean cloths.

Daily CLEAN AND SANITIZE BEVERAGE DIFFUSER

Step Action

1. Remove the nozzle from the dispenser by turning and pulling down.

2. Remove the diffuser from the valve by pulling down. Place the nozzle and diffuser in the San-

itizer Solution.

3. Wipe inside the diffuser area using a sanitized cloth and the nylon nozzle brush.

4. Clean the diffuser and nozzle using the nylon nozzle brush. Rinse with lukewarm water.

5. Reinstall the diffuser and nozzle. Ensure they are located correctly in the machine.

®

Cleanliness/Facility and Equipment Maintenance

Rev. 02/03 - 2 - Publication Number: TP01054PMC

www.cornelius.com Copyright © 2003

Monthly CLEANING AND SANITIZING INTERIOR SURFACES

Step Action

1. Remove all of the ice from the hopper.

2. Remove the agitator retainer and the ice agitator assembly.

3. Using the cleaning solution and the nylon brush or sponge, clean the interior of the hopper, top

cover and agitator assembly. Thoroughly rinse the hopper, cover, and agitator assembly with

clean potable water. Note: when pouring liquid into the hopper do exceed the rate of 1/2

gallon per minute.

4. Reinstall the agitator assembly. Take special care to ensure that the retainer is tight.

5. Using the spray bottle filled with sanitizing solution, spray the entire interior of the hopper and

the agitator assembly. Allow to air dry.

6. Remove the ice chute (snap fit) by spreading the sides apart slightly to disengage the tabs in

the cover from the ice chute and sliding down to remove the cover. The ice chute (rear half)

are now exposed for cleaning.

7. Remove the black plastic access cover for the air cylinder from the splash panel.

8. Using the cleaning solution and the nylon brush or sponge, clean the ice chute cover, ice chute

(rear half), ice gate, and air cylinder access cover and rinse thoroughly to remove all traces of

the cleaning solution.

9. Using the spray bottle filled with sanitizing solution, spray these parts with sanitizer. Allow to

air dry.

10. Reassemble the air cylinder access cover and ice chute.