CONDTROL Auto RotoLaser User manual
CONDTROL Auto RotoLaser
EN CONTENTS
SAFETY INSTRUCTIONS 4
INTENDED USE 5
SET 5
TECHNICAL SPECIFICATIONS 6
PRODUCT DESCRIPTION 7
OPERATION 10
OPERATION MODES 12
ACCURACY CHECK 16
CARE AND MAINTENANCE 19
UTILIZATION 20
WARRANTY 20
DE INHALT
SICHERHEITSVORSCHRIFTEN 22
PRODUKTBESCHREIBUNG 23
LIEFERUMFANG 23
TECHNISCHE SPEZIFIKATIONEN 24
GERÄTEÜBERSICHT 25
BETRIEB 28
BETRIEBSMODUS 30
GENAUIGKEITSÜBERPRÜFUNG 34
PFLEGE UND BEDIENUNG 37
ENTSORGUNG 38
GARANTIE 39
WARTUNG UND REPARATUR 40
CONDTROL Auto RotoLaser
RU
PL
CHARAKTERYSTYKA TECHNICZNA 61
TRYBY PRACY 67
KONSERWACJA I EKSPLOATACJA 74
UTYLIZ AC JA 76
GWARANCJA 77
RotaRy l aseR
4
user manual
EN
CONDTROL Auto RotoLaser
SAFETY INSTRUCTIONS
Attention! This user manual is an essential part of this product.
The user manual should be read carefully before you use the product
for the first time. If the product is given to someone for temporary
use, be sure to enclose user manual to it.
- Do not misuse the product
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the
product.
Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 635 nm
EN60825-1: 2007-03
-Do not look into the laser beam or its reflection, with unprotected
eye or through an optical instrument. Do not point the laser beam at
people or animals without the need. You can dazzle them.
-To protect your eyes close them or look aside.
- Always install the product in such a way, so that laser line is below
or above eye level.
- Do not let unauthorized people enter the zone of product operation.
- Store the product beyond reach of children and unauthorized
people.
- It is prohibited to disassemble or repair the product yourself. Entrust
product repair to qualified personnel and use original spare parts
only.
- Do not use the product in explosive environment, close to flammable
materials.
RotaRy l aseR
5
user manual
EN
CONDTROL Auto RotoLaser
INTENDED USE
CONDTROL Auto RotoLaser – self-levelling rotary laser level, designed
for construction workers, plasterers, and contractors intended to
build vertical and horizontal planes, plumb line (zenith). The product
has scan function that allows building only a part of laser plane
defined by user.
The product is suitable for use at both indoor and outdoor building
areas
SET
Rotary laser – 1 pc.
Universal mount on wall/tripod 5/8’’ – 1 pc.
Batteries – 4 pcs.
Battery charger – 1 pc.
Laser receiver – 1 pc.
Mount for laser receiver – 1 pc.
Remote control – 1 pc.
Laser intensive glasses – 1 pc.
Magnetic target board – 1 pc.
User manual – 1 pc.
Plastic case – 1 pc.
- Laser intensive glasses are used for better recognition of the laser
beam, do not use them for other purposes. Laser glasses do not
protect from laser radiation as well as ultraviolet radiation and reduce
color perception.
RotaRy l aseR
6
user manual
EN
CONDTROL Auto RotoLaser
TECHNICAL SPECIFICATIONS
Working range with receiver 400 m (in diameter)
Accuracy 30” (±0,15 mm/1 m)
Self-levelling range ±5°
Laser type Class II 635 nm < 1 mW
Rotation speed 0; 120; 300; 600 rpm
Scan function
Remote control operating
distance 20 m
Operation temperature -100C ~ +500C
Power supply of rotary laser Rechargeable
DC4.8-6 V (4 x 2600mAh AA Ni-MH)
Power supply of remote control
Power supply of laser receiver
Continuous working time up to 20 h
Waterproof and dustproof IP 54
Tripod mount 5/8"
Dimensions 150 X 128 X 161 mm
Weight 1,4 kg (with batteries)
RotaRy l aseR
7
user manual
EN
CONDTROL Auto RotoLaser
PRODUCT DESCRIPTION
1. Laser output window
2. Rotary head
3. Aperture for plumb line
4. Control panel
5. Battery cover
6. Battery charger jack
7. Fixator of battery cover
8. Tripod thread 5/8”
9. Location for universal mount fixing
2
1
1
2
8
4
6
7
9
3
5
6
RotaRy l aseR
8
user manual
EN
CONDTROL Auto RotoLaser
Control panel
1. Turn on/off
2. Power indicator
3. Manual mode
4. Manual mode indicator
5. Tilt mode
6. Tilt mode indicator
7. Remote control sensor
5
1 2
6
3
4
7
RotaRy l aseR
9
user manual
EN
CONDTROL Auto RotoLaser
Remote control
3
6
2
4
5
1
1. Remote control signal indicator
2. Scan mode/scan sector
3. Move laser dot/scan sector clockwise
4. Move laser dot / scan sector counterclockwise
5. Change rotation speed/stop rotation
6. Manual mode
Use remote control to manage the product at distance up to 20 m.
When sending signals to the product indicator on remote control
flashes red.
RotaRy l aseR
10
user manual
EN
CONDTROL Auto RotoLaser
Laser receiver
Laser receiver allows using the product outdoor as well as while
intensive sunshine at distance up to 400 m (in diameter) when it’s
difficult to recognize laser beam.
1 2 3
4
5
OPERATION
Battery charging
In case power indicator starts flashing while operation – batteries
need to be charged. Please use battery charger included in the set.
Full charging takes approximately 5 hours. While charging red light
indicator on battery charger will be on. As soon as indicator becomes
1. Turn on/off
2. Turn on/off sound signal
3. High/normal accuracy mode
4. Display
5. Receiver sensor
Other manuals for Auto RotoLaser
1
This manual suits for next models
2
Table of contents
Languages:
Other CONDTROL Measuring Instrument manuals
CONDTROL
CONDTROL xMarker User manual
CONDTROL
CONDTROL HYDRO PRO User manual
CONDTROL
CONDTROL XP3 User manual
CONDTROL
CONDTROL NEO G200 User manual
CONDTROL
CONDTROL Ranger 3 User manual
CONDTROL
CONDTROL NEO G220 User manual
CONDTROL
CONDTROL WheelPRO User manual
CONDTROL
CONDTROL Vector 30 User manual
CONDTROL
CONDTROL XLiner Duo User manual
CONDTROL
CONDTROL Auto RotoLaser User manual
CONDTROL
CONDTROL Qb User manual
CONDTROL
CONDTROL Laser 3D CONDTROL User manual
CONDTROL
CONDTROL Beton User manual
CONDTROL
CONDTROL Paint PRO User manual
CONDTROL
CONDTROL NEO X1-360 User manual
CONDTROL
CONDTROL SuperRotolaser User manual
CONDTROL
CONDTROL NEO G220 User manual
CONDTROL
CONDTROL Wheel User manual
CONDTROL
CONDTROL NEO X200 User manual
CONDTROL
CONDTROL Vector 100 User manual
