Code Alarm CA 210 User manual

128-6530

1 of 10

CA 210 Owners Manual

128-6530

2 of 10

Page 2

Your system has many features and available options some of which are

selected at time of installation. Consult your installing dealer for options that

may have been installed and are not listed.

LOCKINGTHESYSTEM:

1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk.

2. Press and release the LOCK button of your keychain transmitter one time.

The vehicle's doors will lock, the parking lights will flash once, the horn will

honk once, and the dash mounted LED will begin to flash slowly confirming

the system is locked. If the optional starter inhibit feature is installed, the

starter inhibit feature will turn on.

SILENTLOCKING:

1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk.

2. Press and hold both LOCK & UNLOCK buttons of your key chain transmitter

for 2 seconds. The parking lights will flash once, and the dash mounted LED

will begin to flash slowly confirming the system is locked. The horn will not

honk. If the optional starter inhibit feature is installed, it will activate.

UNLOCKINGTHESYSTEM:

As you approach the vehicle, press and release the UNLOCK button on the

keychain transmitter. The vehicle's doors will unlock, the parking lights will

flash 2 times, the horn will honk 2 times, and the dash mounted LED will turn

off. If the optional starter inhibit feature is installed, the starter inhibit feature

will turn off.

SILENTUNLOCKING:

As you approach the vehicle, press and hold both LOCK & UNLOCK buttons

on your key-chain transmitter for 2 seconds. The parking lights will flash 2

times, and the dash mounted LED will turn off confirming that the system is

unlocked. The horn will not honk. If the optional starter inhibit feature is

installed, it will deactivate.

128-6530

3 of 10

VALET SWITCH:

The valet switch allows you to temporarily bypass the optional starter inhibit

feature, eliminating the need to hand your transmitter to parking attendants or

garage mechanics. When the system is in valet mode, the optional starter

inhibit feature is bypassed, however the remote panic feature and remote

door locks will remain operational.

1. Enter the vehicle, and turn the ignition key to the ON position.

2. Press and hold the valet push button switch until the dash mounted LED

turns on solid. The system will remain in the valet mode.

3. To return to normal operation, press and release the push button switch

any time the ignition is on.

NOTE: Always remember to return the vehicle to the valet OFF position. This

will ensure that the optional starter inhibit feature remains active at all times

MANUALLYOVERRIDINGYOURSYSTEM:

USINGTHEVALETSWITCHMANUALOVERRIDE

The optional starter inhibit feature can be deactivated without the use of the

keychain transmitter. This is necessary, since you will need the ability to

operate your vehicle if the transmitter is lost or its battery fails.

1. Open the vehicle door.

2. Turn the ignition key to the ON position.

3. Within 5 seconds, press and release the valet switch.

The optional starter inhibit feature will enter the (by-passed) mode. You can

now start and operate the vehicle normally.

Typically this override mode is used only if the transmitter has become

inoperative.

Page 3

128-6530

4 of 10

Page 4

ELIMINATINGTHE NORMAL ARM/DISARMCHIRPS

You can selectively eliminate the normal arm & disarm chirps by holding the

transmitter button slightly longer when locking or unlocking. This will prevent

the horn chirps for one arm or disarm cycle. If you find this inconvenient and

wish to eliminate these chirps permanently, please check with your installation

center.

REMOTEPANICOPERATION:

The PANIC button on your keychain transmitter functions as a panic switch for

use in emergency situations. To use remote panic;

1. Press and hold the PANIC button on the keychain transmitter for 3 or more

seconds. The horn will immediately start honking.

2. To stop the honking, press and hold the PANIC button on the transmitter

again for 3 seconds. If the button is not pressed, the horn will

automatically stop honking after 30 seconds.

NOTE: While in the panic mode, pressing and releasing the lock, or the

unlock buttons will, if the option is installed, lock and unlock the doors

respectively. While in the panic mode, anytime the unlock button is pressed,

the panic feature will continue for the allotted 30 seconds, however, the vehicle

will be unlocked allowing the vehicle to start.

ADDITIONALREMOTEFUNCTIONCHANNEL2

The system has an optional feature, (Channel 2), that can be connected to the

Trunk Release. To operate channel 2, press and hold the TRUNK button of

your keychain transmitter for four seconds.

128-6530

5 of 10

DASHMOUNTEDLEDINDICATORS

SLOWFLASHING = LOCKED

OFF = UNLOCKED

ONSOLID = VALETMODE

ALARMSIREN CHIRPINDICATION

1HONK* = LOCK

2HONK* = UNLOCK

ALARMPARKING LAMP INDICATIONS

1FLASH = LOCK

2FLASH = UNLOCK

CA-210

SYSTEM FUNCTIONS AT A GLANCE

128-6530

6 of 10

Code Systems, Inc. Limited Lifetime Warranty

Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE

vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as

provided below) should this Product under normal use and conditions, be proven defective in material

or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY

INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts

directly related to repairs of the defect(s).

Switches, indicator lights, and transmitter cases are similarly warranted to the original

purchaser for a period of one (1) year from the date of purchase of the Product.

CODE accessories, sold separately, are covered by the applicable warranty accompany-

ing the accessory.

This warranty is non-transferable, non-assignable and is voided when: (1) the Product is

removed from the vehicle in which it was originally installed; or (2) the vehicle in which the Product

was originally installed is transferred to another party.

This warranty does not apply to any product damaged by accident, physical or electrical

abuse, improper installation, alteration, or use contrary to its intended function, fire, flood, or other

natural acts.

In order for the Product to be repaired or replaced under the terms of this warranty, the

defective Product must be returned to an authorized CODE dealer and accompanied by a copy of the

retail sales receipt. The date of purchase and year, make and model of the vehicle in which the

Product was originally installed must be clearly indicated on the sales receipt.

This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED

OR IMPLIED. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE

DURATION OF THIS WRITTEN WARRANTY. IN NO CASE SHALL CODE BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR-

RANTY, EXPRESS OR IMPLIED, WHATSOEVER.

CODE does not warrant that the Product cannot be compromised or circumvented. THE EXTENT OF

CODE’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT

PROVIDED ABOVE AND, IN NO EVENT SHALL CODE’S LIABILITY EXCEED THE PURCHASE

PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATION

LABOR.

Some states do not allow the exclusion or limitation of incidental or consequential dam-

ages, so the above limitation may not apply to you. This warranty gives you specific legal rights and

you may also have other rights which vary from state to state

128-6530

7 of 10

CODE SYSTEMS, INC.

1-800-421-3209

Table of contents

Other Code Alarm Car Alarm manuals

Code Alarm

Code Alarm CA 1550 User manual

Code Alarm

Code Alarm ca 2051 User manual

Code Alarm

Code Alarm PROFESSIONAL SERIES CA 1551 User manual

Code Alarm

Code Alarm CA 510 User manual

Code Alarm

Code Alarm SRT 1600 User manual

Code Alarm

Code Alarm PRO 3500 Specifications

Code Alarm

Code Alarm CATX120 Operating instructions

Code Alarm

Code Alarm CA 6151 User manual

Code Alarm

Code Alarm CATX130 Operating instructions

Code Alarm

Code Alarm Professional ca6153 User manual

Code Alarm

Code Alarm 2000 User manual

Code Alarm

Code Alarm CSI-200 User manual

Code Alarm

Code Alarm CA 671 User manual

Code Alarm

Code Alarm PowerCode PC 6100 User manual

Code Alarm

Code Alarm CA-500 User manual

Code Alarm

Code Alarm PROFESSIONAL SERIES User manual

Code Alarm

Code Alarm CA 680 User manual

Code Alarm

Code Alarm CA611 User manual

Code Alarm

Code Alarm Professional Series CA 1550 User manual

Code Alarm

Code Alarm ca 5152 User manual

Code Alarm

Code Alarm CA-330 User manual

Code Alarm

Code Alarm SRT 5500 User manual

Code Alarm

Code Alarm CA-640 User manual

Code Alarm

Code Alarm Vehicle Security System User manual

Popular Car Alarm manuals by other brands

Clifford

Clifford 3606X owner's guide

Ultra Start

Ultra Start 2500M SERIES install guide

Ultra Start

Ultra Start 650 Series owner's manual

Audiovox

Audiovox Prestige Platinum+ APS-511C owner's manual

Sparkrite

Sparkrite SRA8 Guide

Viper

Viper 4708V owner's manual

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Installation and maintenance manual

Falcon

Falcon Predator XL3 Installer manual

Audiovox

Audiovox Auto Security XR91 Programming guide

Clifford

Clifford Sabre II owner's manual

CrimeStopper

CrimeStopper CS-8717 Wiring diagram

Ultra Start

Ultra Start 450 SERIES install guide

Scytek electronic

Scytek electronic Vectra X3 product manual

Excalibur

Excalibur AL-1860-EDPB Operation guide

Clifford

Clifford CYBER 2 owner's manual

Gemini

Gemini 7057 user manual

FlashLogic

FlashLogic FLRSBA PRESTIGE Product guide

Magicar

Magicar FAI-440 manual