Circutor CIRWATT Series User manual

MULTIPURPOSE

THREE PHASE METER

CIRWATT Series

C Type

Installation Manual

(M981 001-03-05C)

Page no. 1

INSTALLATION MANUAL CONTENTS Page no.

1.-

INTRODUCTION................................................................................................. 3

2.-

METER MODELS ...............................................................................................3

3.-

SAFETY LEVELS (Seals) ................................................................................... 3

4.-

DISPLAY............................................................................................................. 4

4.1.- Dis lay Modes . ................................................................................................. 4

4.1.1.- STAND BY Mode .......................................................................................4

4.1.2.- READING Mode ......................................................................................... 4

4.2.- Ty es of screen................................................................................................. 5

4.2.1.- Stand by screen ..........................................................................................5

4.2.2.- Menu Screen...............................................................................................5

4.2.3.- Data Screen. ...............................................................................................5

4.3.- STAND BY screen mode .................................................................................. 6

4.4.- READING screens mode...................................................................................7

4.4.1.- Screen L (Main)........................................................................................... 8

4.4.2.- Screen L1(CONTRACT 1, PURCHASE) ..................................................... 8

4.4.3.- Screen L2 (CONTRACT 2, PURCHASE) .................................................. 13

4.4.4.- Screen L3 (CONTRACT 3, SALE)............................................................. 14

4.4.5.- Screen L4 (INFORMATION)...................................................................... 15

4.4.6.- Screen L40 (INFORMATION: INDICATORS) ............................................ 16

4.4.7.- Screen L5 (Info Fab) ................................................................................. 21

5.-

TECHNICAL FEATURES.................................................................................. 22

6.-

INSTALLATION AND START UP...................................................................... 24

6.1.- Installing the equi ment................................................................................... 24

6.2.- Indirect meter terminal ratio (see label on terminal cover)................................ 24

6.3.- Direct meter terminal ratio (see label on terminal cover) .................................. 25

6.4.- Meter connection diagrams ............................................................................. 26

7.-

MAINTENANCE ................................................................................................ 27

8.-

TECHNICAL SERVICE ..................................................................................... 27

A.- CIRWATT communications diagram...................................................................... 28

B.- Changing the battery............................................................................................. 28

C.- Quadrants ............................................................................................................. 29

D.- CIRWATT Ethernet communications……..……………………………………………30

Page no. 2

Index of tables

Table 1 Dis lay Codes..................................................................................................5

Table 2 Stand by screen mode .....................................................................................6

Table 3 Reading screens mode diagram ......................................................................7

Table 4 Main menus screen..........................................................................................8

Table 5 Contract 1 screen............................................................................................. 8

Table 6 Absolute energy value codes for contract 1...................................................... 9

Table 7 Incremental energy value codes for the meter................................................ 10

Table 8 Absolute energy value codes screen for contract 1 closure 1......................... 11

Table 9 Incremental energy value codes for closure 1 of contract 1............................ 12

Table 10 Absolute values screen for contract 3 closure 1 ........................................... 14

Table 11 Incremental values screen for contract 3 closure 1....................................... 15

Table 12 Screen L4. Information................................................................................. 15

Table 13 Screen L40. Indicators. ................................................................................ 16

Table 14 Screen L41. Contracted owers. .................................................................. 17

Table 15 Screen L42. Transformation ratios ............................................................... 17

Table 16 Screen L43. Information: current values....................................................... 18

Table 17 Screen L44. Instant values .......................................................................... 19

Table 18 Screen L45. Communications ...................................................................... 19

Table 19 Screen L46. Identifiers ................................................................................. 20

Table 20 Screen L47. Out ut constants...................................................................... 20

Table 21 Screen L48. Time changes .......................................................................... 21

Page no. 3

1.- INTRODUCTION.

CIRWATT is a multi- ur ose three- hase, four quadrant, digital meter. Its great

versatility is its main feature, allowing it to ada t to the needs of each user.

It has been es ecially designed for installations where the electro-mechanical meters

do not meet current requirements. It is s ecifically for those installations that require a

meter with a tariff system or where electricity billing is done by using load rofiles.

2.- METER MODEL

The different meter configuration o tions covering the needs of each installation are

shown below:

CIRWATT 4__ - _ __ _ - _ _ _ - __

Modo de conexión

Tensión de medida

Precisión

4 hilos

Clase 0.5S Activa / Clase 1.0 Reactiva

Clase 1.0 Activa / Clase 2.0 Reactiva

3x57/100V ... 3x230/400V (Multirrango)

Medida de corriente

/5A (Transformador. Máximo 10A eficaces)

10 A (Directo. Máximo 100A eficaces)

FrecuenciaCAutomático (50/ 0Hz)

Comunicaciones

RS-232

RS-485

Expansión

0Sin entradas/salidas

44 entradas + 3 salidas (optomos)

54 entradas + 3 salidas (relé)

94 entradas + 3 salidas (optoacoplador 24V)

CModelo Mediana Industria

00Revisión

T1/1A (Transformador. Máximo 2A eficaces)

Modelo

Sin comunicaciones 0

3.- SAFETY LEVELS (Seals)

CIRWATT has the necessary seals to ensure that the meter is not tam ered with.

These seals must always be attached once the meter is installed.

•

Terminal cover seals. These are attached

once the equi ment has been installed These

seals revent the modification of the meter

connection.

•

Button seal. Bill closure and equi ment

RESET o erations are rotected by these

seals.

•

Label Seal. This revents the equi ment

features label from being changed.

(Transformation ratios, integration eriod, ty e

or market and area of installation).

LABEL SEAL

TERMINAL CASING

SEALS

DISPLAY

BUTTON

SETTING BUTTON, BILL

CLOSURE AND METER

START

4 wire 4 Connection mode

Class 0.5S Active / Class 1.0 Reactive 05 Accuracy

Class 1.0 Active / Class 2.0 Reactive 10

3x57/100V ... 3x230/400V (Multirrange) U Measured voltage

/1A (Transformer. Maximum 2A effective) T1 Current measurement

/5A (Transformer. Maximum 10A effective) T5

10 A (Direct. Maximum 100A effective) D1

Automatic (50/ 0 Hz) C Frequency

Without communications 0 Communications

RS-232 1

RS-485 2

Ethernet 3

Without inputs/outputs 0 Expansion

4 inputs + 3 outputs (optomos) 4

4 inputs + 3 outputs (relay) 5

4 inputs + 3 outputs (Optocoupled 24V) 9

Model: Medium sized industry C Model:

Revision 00

Page no. 4

4.- DISPLAY.

The different menus and/or screens may be dis layed by using the key on the

CIRWATT. Pressing the key, for less than 2 seconds (short ress), moves through

the different active menus on the screen. Pressing the same key ( ) for two seconds

(long ress), automatically accesses the different secondary o tions and menus.

09-09-2003 12:23:10

Q1 1+2+3+ T534 NBC

Línieas de fase

activas

Quadrante Alarmas

Tarifas activas

Sentido

energía

Data is dis layed via a one line LCD dis lay es ecially designed for the CIRWATT.

The units and resolution of the energy values are the same as the overflow values in

the meter, i.e. they are the recorder’s values. The units will be kWh or kvarh. The size

of the records will be 8 whole digits (99.999.999)

The units in which any power and energy data is transmitted by the communications

protocol will be kW, kWh, and/or kvarh, independent of what is being displayed.

4.1.- Display Modes.

CIRWATT has different dis lay modes re resenting different information.

4.1.1.- STAND BY Mode

This will always occur as a default, whenever the READING mode is not activated by

ressing or the key not being ressed for 60 seconds even though a menu has been

entered.

4.1.2.- READING Mode

This is activated by a long ress on the key, and dis lays the different o tions to

access data screens or other secondary menu screens. Pressing the key (short

ress) moves through the menu, a long ress ( ressing the key for 2 seconds)

enters the o tion that is flashing on the screen. 60 seconds after the last ress, the

Dis lay returns to STAND BY Mode. The different values dis layed on this screen are

shown in oint 4.4 READING screens mode.

Quadrant

Active hase

lines

Energy

direction

Alarms

Active tariffs

Page no. 5

4.2.- Types of screen.

There are three ty es of screen.

4.2.1.- Stand by screen

The STAND BY screen shows information without the need of using the equi ment’s

key. It will be ty ically used for showing the customer the necessary information to

control the measurement in the easiest way ossible. (This is the default screen)

09-09-2003 12:23:10

Q1 1+2+3+ T534 NBC

4.2.2.- Menu Screen

The MENU screen shows the different o tions to access the data screens or the other

secondary menu screens. It is only used in READING mode.

INFO

INFO FAB

4.2.3.- Data Screen.

The DATA screens show information on a s ecific grou of data. It is only used in

READING mode.

The data lines consist of two fields: one is the code and the other the value of the data.

9 characters are reserved for the code field and the remainder for the value field until

the 20 dis lay characters have been used.

1.18.1.01 000000003

1.18.2.01 000000009

The codes are defined in the following way.

Table 1 Dis lay Codes

Display code B . CD

0 Total

1 Contract 1

2 Contract 2

3 Contract 3

Energy urchase Energy sale

18 Total active energy (kWh)

19 Incremental active energy (kWh)l

58 Total Reactive Energy (kvarh)

59 Incremetal reactive energy (kvarh)

16 Maximum demand (kW)

12 Power Excesses

28 Active energy total (kWh)

29 Incremental active energy (kWh)

68 Total Reactive Energy (kvarh)

69 Incremental Reactive Energy

(kvarh)

26 Maximum demand (kW)

22 Power Excesses

Page no.

Display code E . F

E 0 Total

1…10 Tariff eriod

F 1…6 Bill closures (last - first)

Pressing for a long time exits a data screen

Pressing for a long time (for 2 seconds) on the

key exits a

data screen

4.3.- STAND BY Mode screen

The different values dis layed on the STAND BY mode screen are shown below

Table 2 Stand by mode screen

Screens Text Type Comments

r.xxxxx P.xxxxx Link Address and Measurement Point

OBIS

Without OBIS

0.18.0

0.28.0

0.58.0

0.68.0

0.78.0

0.88.0

IMP

EXP

Absolute active energy in ut total

Absolute active energy out ut total

Total Q1absolute reactive energy

Total Q2 absolute reactive energy

Total Q3 absolute reactive energy

Total Q4 absolute reactive energy

DD-MM-YYYY HH:MMSS

SCROLL

Date and Local Time

Al hanumeric indicators’ line

Q1 Quadrant (Q1, Q2, Q3, Q4) (See APPENDIX C)

1+2+3+ Presence of voltage in each hase with its corres onding current

direction.

T123 Current tariff eriods in contracts 1, 2 and 3 res ectively.

C Critical alarm due to internal or external incidents directly affecting

measurement. This will be flashing.

N Non critical alarm not affecting measurement creating a meter

malfunction. This will be flashing.

B Low battery alarm. This will be flashing.

P S ecial arameter mode activated.

Page no. 7

4.4.- READING screens mode.

READING mode screens consist of different menus as shown below.

Table 3 Reading mode screens diagram

(Reposo)

(Raíz)

(Contrato 1)

L11 (Actual)

L12 (Cierre 1)

L13 (Cierre 2)

L14 (Cierre 3)

L15 (Cierre 4)

L1 (Cierre 5)

L17 (Cierre )

(Contrato 2)

L21 (Actual)

L22 (Cierre 1)

L23 (Cierre 2)

L24 (Cierre 3)

L25 (Cierre 4)

L2 (Cierre 5)

L27 (Cierre )

(Contrato 3)

L31 (Actual)

L32 (Cierre 1)

L33 (Cierre 2)

L34 (Cierre 3)

L35 (Cierre 4)

L3 (Cierre 5)

L37 (Cierre )

(Información)

L40 (Indicadores)

L41 (Parámetros contratados)

L42 (Relaciones trasnformación)

L43 (Valores en curso)

L44 (Valores instantáneos)

L45 (Comunicaciones)

L4 (Identificadores)

L47 (Constantes de salida)

Información

Fabricante

Modelo

Número de serie

Fecha de fabricación

Pantalla instalación

Estado Cirwatt

Idioma

L48 (Cambio horario)

Contraste display

(Stand by)

(Main)

(Contract 1)

(Contract 2)

(Contract)3

(Information)

Manufacturer's

Information

L11 (Actual)

L12 (Closure 1)

L13 (Closure 2)

L14 (Closure 3)

L15 (Closure 4)

L1 (Closure 5)

L17 (Closure )

L21 (Actual)

L22 (Closure 1)

L23 (Closure 2)

L24 (Closure 3)

L25 (Closure 4)

L2 (Closure 5)

L27 (Closure )

L31 (Actual)

L32 (Closure 1)

L33 (Closure 2)

L34 (Closure 3)

L35 (Closure 4)

L3 (Closure 5)

L37 (Closure )

L40 (Indicators)

L41 (Contracted parameters)

L42 (Transformation ratios)

L43 (Current values)

L44 (Instant values)

L45 (Communications)

L4 (Identifiers)

L47 (Output constants)

L48 (Change time)

Model

Series number

Date of manufacture

Installation screen

Cirwatt Status

Language

Display contrast

Manufacturer's

Information

Page no. 8

4.4.1.- Screen L (Main)

This is the first screen accessed in READING Mode. It is a MENU screen giving access

to other, secondary MENU screens.

Table 4 Main screen menus

Screen Text Comments

CONTRACT 1 Accesses values for contract 1

CONTRACT 2 Accesses values for contract 2

CONTRACT 3 Accesses values for contract 3

INFO. Accesses information not relevant to the contracts

MANU INFO Accesses additional information defined by the

manufacturer

BACK Returns to STAND BY screen

CIRWATT allows the setting of any of the three contracts such

as PURCHASE or SALE. Below is a possible contract setting

that may be changed according to the needs of the USER

and/or COMPANY.

4.4.2.- Screen L1 (CONTRACT 1, PURCHASE)

This is the screen that accesses information on contract 1. It is a MENU screen that

allows access to other secondary MENU screens.

Table 5 Contract 1 screen

Screen Text Comments

CURRENT Accesses current values for contract 1

CLOSURE 1 DD-MM-YY This shows information on values from

contract 1 closure 1 (most recent)

CLOSURE 2 DD-MM-YY Accesses values for contract 1 closure 2

CLOSURE 3 DD-MM-YY Accesses values for contract 1 closure 3

CLOSURE 4 DD-MM-YY Accesses values for contract 1 closure 4

CLOSURE 5 DD-MM-YY Accesses values for contract 1 closure 5

CLOSURE 6 DD-MM-YY Accesses values for contract 1 closure 6

(oldest)

BACK Returns to the revious screen

4.4.2.1.- Screen L11 (CONTRACT 1: CURRENT)

This screen shows information on current values for contract 1. On entering this menu

two o tions a ear for data dis lay: absolute values and incremental values.

The ABSOLUTE o tion (ABS) dis lays absolute values for active and reactive energy,

as well as ower excesses and maximum demands.

The INCREMENTAL o tion (INC) dis lays the incremental values from the last bill

closure for active and reactive energy, ower excesses and maximum demands.

If no o tion is selected, a short ress will move on to showing Absolute data values as

a default.

Page no. 9

Information is only shown on a screen if it is active, i.e. if certain tariffs or

owers have not been activated, information on these tariffs, maximum

demands or excess ower recordings will not a ear on the screen.

The codes for Absolute values are shown below:

Table 6 Absolute energy value codes for contract 1.

AbS (Absolute)

OBIS Without OBIS

KWH 1.18.1 ABSIMP T1 C1-ACT

KWH 1.18.2 ABSIMP T2 C1-ACT

KWH 1.18.3 ABSIMP T3 C1-ACT

KWH 1.18.4 ABSIMP T4 C1-ACT

KWH 1.18.5 ABSIMP T5 C1-ACT

KWH 1.18.6 ABSIMP T6 C1-ACT

KWH 1.18.0 ABSIMP TOTAL

C1-ACT

Tariff eriods for Active Energy

from the start of measurement

(if active), included in the total

( eriod 0)

1.18.x where x = tariff ( eriod)

KVARh 1.58.1 ABSQ1 T1 C1-ACT

KVARh 1.58.2 ABSQ1 T2 C1-ACT

KVARh 1.58.3 ABSQ1 T3 C1-ACT

KVARh 1.58.4 ABSQ1 T4 C1-ACT

KVARh 1.58.5 ABSQ1 T5 C1-ACT

KVARh 1.58.6 ABSQ1 T6 C1-ACT

KVARh 1.58.0 ABSQ1 TOTAL

C1-CO1

Tariff eriods for Q1 Reactive

Energy from the start of

measurement (if active),

included in the total ( eriod 0)

1.58.x where x = tariff ( eriod)

Power Excesses 1.12.1 EXCES T1 C1-ACT

Power Excesses 1.12.2 EXCES T2 C1-ACT

Power Excesses 1.12.3 EXCES T3 C1-ACT

Power Excesses 1.12.4 EXCES T4 C1-ACT

Power Excesses 1.12.5 EXCES T5 C1-ACT

Power Excesses 1.12.6 EXCES T6 C1-ACT

Excesses since the last bill

closure (if active)

1.12.x where x = tariff ( eriod)

Maximums 1.16.1 MAXDEM T1 C1-ACT

Maximums 1.16.2 MAXDEM T2 C1-ACT

Maximums 1.16.3 MAXDEM T3 C1-ACT

Maximums 1.16.4 MAXDEM T4 C1-ACT

Maximums 1.16.5 MAXDEM T4 C1-ACT

Maximums 1.16.6 MAXDEM T6 C1-ACT

L11

Maximums 1.16.0 MAXDEM TOTAL

C1-ACT

Maximums from bill closure (if

active), included in the total

1.16.x where x = tariff ( eriod)

Other manuals for CIRWATT Series

Table of contents

Other Circutor Measuring Instrument manuals

Circutor

Circutor DHC-96 mAdc User manual

Circutor

Circutor MK-30-LCD User manual

Circutor

Circutor GTEST Probe User manual

Circutor

Circutor CVM k2 User manual

Circutor

Circutor DM45 A User manual

Circutor

Circutor CVM-BDM User manual

Circutor

Circutor CEM-C12 User manual

Circutor

Circutor CEM-C31-T1 User manual

Circutor

Circutor AR6 User manual

Circutor

Circutor AR5-L User manual

Circutor

Circutor DM45 CMD User manual

Circutor

Circutor DM45 CMD User manual

Circutor

Circutor QNA 412 User manual

Circutor

Circutor CVM-D41 DC User manual

Circutor

Circutor CEM-C20 User manual

Circutor

Circutor DHC-96 CPM User manual

Circutor

Circutor CVM k2 User manual

Circutor

Circutor M-CVM-AB-4AI-8AO User manual

Circutor

Circutor C-80 User manual

Circutor

Circutor DCP-96 Aac User manual

Circutor

Circutor CVM-E3-MINI-ITF User manual

Circutor

Circutor M20951 User manual

Circutor

Circutor CVM-B100 User manual

Circutor

Circutor CEM-C31-T1 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual