ChipER Technology HLC-84BD/P User manual
1/46
User Manual
IP CAMERA
2/46
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.
3/46
Content
I. PREFACE....................................................................................................................................... 4
II. PRODUCT SPECIFICATIONS....................................................................................................... 4
III. PRODUCT INSTALLATION........................................................................................................... 7
A. MONITOR SETTING.....................................................................................................................................7
B. HARDWARE INSTALLATION ASSIGNMENT...................................................................................................8
C. IPASSIGNMENT .......................................................................................................................................10
D. INSTALLACTIVEXCONTROL:...................................................................................................................12
IV. LIVE VIDEO.................................................................................................................................. 14
V. CONFIGURATION........................................................................................................................ 16
A. SYSTEM....................................................................................................................................................17
B. NETWORK................................................................................................................................................20
C. A/VSETTING ...........................................................................................................................................32
D. EVENT LIST..............................................................................................................................................38
VI. NETWORK CONFIGURATION.................................................................................................... 43
VII. FACTORY DEFAULT.................................................................................................................... 45
VIII. PACKAGE CONTENTS ............................................................................................................... 45
IX. MICRO SD CARD ........................................................................................................................ 46
V1.1_120515
4/46
I. Preface
This is a 1/2.7’’ 2M CMOS IP camera with the web server built in. User can view
real-time video via IE browser. It supports H.264, JPEG and MPEG4 video
compression which provides smooth and high video quality. The video can be
stored in the Micro SD card and playback remotely.
With user friendly interface, it is an easy-to-use IP camera which is designed for
security application.
II.Product Specifications
1/2.7” 2M CMOS Sensor
Digital Noise Reduction
Digital Wide Dynamic Range
Shutter Speed adjustion
Sense Up adjustion
Power over Ethernet available (Option)
H.264/ JPEG / MPEG4 compression
Micro SD card backup
DI/DO
Support iPhone/ Android/ Symbian /Blackberry/Mac
Triple Streaming
SDK for Software Integration
Free Bundle 36 Channel Recording Software
Specifications
Hardware
CPU
ARM 9 ,32 bit RISC
RAM
256MB
Flash
16MB
Image sensor
1/2.7” 2M CMOS sensor
Lens Type
4.2mm @ F1.6
Sensitivity
1.0 Lux @ 25fps
5/46
Shutter Time
1 / 5 ~ 1 / 10,000 sec
Audio
G.711(64K) and G.726(32K,24K) audio
compression
Input : Mic built-in
Output : 3.5mm phone jack, Support 2-way
audio
IO
DI / DO
Power over Ethernet
Optional
Operating Temperature
0℃~40℃
Dimensions
59mm x 93.7(mm)x 45.5(mm)
Weight
240g
Network
Ethernet
10/ 100 Base-T
Network Protocol
HTTP, HTTPS, SNMP, QoS/DSCP, Access list,
IEEE 802.1X, RTSP, TCP/IP, UDP, SMTP, FTP,
PPPoE, DHCP, DDNS, NTP, UPnP, 3GPP,
SAMBA
Wireless (Optional)
Wireless
802.11 n/b/g
Security
WEP,WPA-PSK,WPA2-PSK
System
Video Resolution
1920x1080@25fps,
1280x720@25fps, ,640x480@30fps,
320x240@30fps, 176x144@30fps
Triple Streaming
Yes
CMOS setting
Brightness, Contrast, Hue, Saturation,
Sharpness, AGC, Shutter Speed adjustment,
Sense-Up, D-WDR, Flip, Mirror, Noise reduction
Image snapshot
Yes
Full screen monitoring
Yes
Zoom
Yes
Privacy Mask
Yes, 3 different areas
Compression format
H.264/ M-JPEG/ MPEG4
Video bitrates adjust
CBR, VBR
Motion Detection
Yes, 3 different areas
Triggered action
Mail, FTP, Save to SD card, DO, SAMBA
6/46
Pre/ Post alarm
Yes, configurable
Security
Password protection, IP address filtering,
HTTPS encrypted data transmission, 802.1X
port-based authentication for network protection,
QoS/DSCP
Firmware upgrade
HTTP mode, can be upgraded remotely
Simultaneous connection
Up to 10
Micro SD card management
Recording trigger
Motion Detection, IP check, Network break down
(wire only),schedule, DI
Video format
AVI, JPEG
Video playback
Yes
Delete files
Yes
Web browsing requirement
OS
Windows 7, 2000, XP, 2003, Microsoft IE 6.0 or
above
Hardware
Suggested
Intel Dual Core 2.53G,RAM: 1024MB, Graphic
card: 128MB
Minimum
Intel-C 2.8G, RAM: 512MB, Graphic card: 64MB
7/46
III. Product Installation
A. Monitor Setting
i. Right-Click on the desktop. Select “ Properties”
ii. Change color quality to highest (32bit).
8/46
B. Hardware Installation Assignment
i. Camera Construction
Please refer to the picture for camera installation. Use the screws to
lock the bracket to the wall or ceiling, and then connect the camera to
the bracket. There’s a knob on the back of the bracket. Loosen the
knob and you can adjust the angle of camera. Tighten it to fix the
angle.
ii. Connect power adaptor.
Connect IP Cam to PC or network with Ethernet cable.
Set up the network configurations according to the network
environment. For further explanation, please refer to chapter VI,
“Network Configuration for IP CAMERA”.
9/46
iii. PoE ( Power Over Ethernet)(Optional) 802.3af, 15.4W PoE Switch is
recommended
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the
network device, such as an IP phone or a network camera, using the
same cable as that used for network connection. It eliminates the need
for power outlets at the camera locations and enables easier application
of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days
a week operation.
Ethernet
PoE Switch
PoE IP Camera
PoE IP Camera
Ethernet Cable
Ethernet Cable
10/46
C. IP Assignment
i. Use the software, “IP Installer” to assign the IP address of IP CAMERA.
The software is in the attached software CD.
ii. IP installer supports two languages
a. IPInstallerCht.exe：Chinese version
b. IPInstallerEng.exe：English version
iii. There are 3 kinds of IP configuration.
a. Fixed IP (Public IP or Virtual IP)
b. DHCP (Dynamic IP)
c. Dial-up (PPPoE)
iv. Execute IP Installer
v. For Windows XP SP2 user, it may popup the following message box.
Please click “Unblock”.
vi. IP Installer configuration:
vii. IP Installer will search all IP Cameras connected on Lan. The user can
Table of contents
