Canon S450 Manual

Other manuals for S450

1

Table of contents

Other Canon Printer manuals

Canon

Canon DADF-AA1 User manual

Canon

Canon imageCLASS MF4580dn Safety guide

Canon

Canon Printers User manual

Canon

Canon MF735C Series User manual

Canon

Canon Color Bubble Jet BJC-2000 Series User manual

Canon

Canon PIXMA MX310 series Manual

Canon

Canon iP3600 - PIXMA Color Inkjet Printer User manual

Canon

Canon iR1230G User manual

Canon

Canon S800 User manual

Canon

Canon LBP312 SERIES User manual

Canon

Canon imageRUNNER LBP3968 User manual

Canon

Canon 0324B001 - SELPHY ES1 Photo Printer Quick start guide

Canon

Canon PIXMA MP198 User manual

Canon

Canon S 530D User manual

Canon

Canon Color imageCLASS LBP7200Cdn User manual

Canon

Canon WS8400 User manual

Canon

Canon PIXMA MG3000 SERIES User manual

Canon

Canon LBP228x User manual

Canon

Canon PIXMA MP520 User manual

Canon

Canon GX5000 Series User manual

Canon

Canon NP6085 User manual

Canon

Canon Pixma iP1600 Pixma iP1200 User manual

Canon

Canon iP100 - PIXMA Color Inkjet Printer Use and care manual

Canon

Canon MultiPASS L90 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Samsung

Samsung BIXOLON SRP-350plusF user manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual

Epson

Epson Stylus Photo PX700W Basic operation guide

Ricoh

Ricoh SP204SF user guide

Star Micronics

Star Micronics futurePRNT TSP100 Hardware manual

Epson

Epson TM-TM88V-i Technical reference guide

S450 Setup Instructions

Step 1: Unpack The Printer

1. Carefully remove all items from the box.

2. Remove all shipping tape and materials from the unit. Open the front cover and

remove the spacers.

Step 2: Plug In and Turn On the Printer

Step 3: Attach the Paper

Output Tray

Step 4: Install The BJ® Cartridge

1. Lift up the front cover.

2. Remove the BC-31e Color BJ Cartridge from its package.

3. Remove:

• Orange cap

• Orange tape

4. Raise the blue lock lever on the right side of the cartridge holder.

5. Insert the BC-31e Color BJ Cartridge into the right cartridge holder.

6. Lower the blue lock lever until it locks into place, then remove the large orange

protective piece.

7. Repeat these steps to prepare the BC-30e Black Cartridge.

Remove all pieces of shipping tape from the outside of the printer. Be sure to remove the tape

from the back of the printer also.

Remove the protective plastic piece from the sheet feeder and protective foam block from the

paper path.

Note that tape may not be in the exact locations shown here.

8. Open the document tray.

Insert the black cartridge into the left cartridge holder.

Step 5: Insert the Ink

Tanks

1. Start with the BCI-3eY (Yellow) Ink

Tank.

2. Pull up the orange tape and remove the plastic wrapper.

3. Twist off the protective orange cap.

To prevent spills, do not press the side of the Ink Tank.

4. Insert the Ink Tank into the slot on the right.

5. Press down until the Ink Tank locks into place.

6. Insert the BCI-3eM Magenta and BCI-3eC Cyan Ink Tanks into their respective

slots in the cartridge.

7. Insert the black Ink Tank into the cartridge on the left.

8. Important!

Before you close the front cover, write down the serial number (located inside the

printer to the right of the cartridge holder).

9. Close the front cover.

The printer automatically cleans the print heads which takes approximately 30-60 seconds.

When the POWER light stops flashing, the printer is ready.

Step 6: Install the Printer Software - Choose

Installation A, B, or C

A - Windows ® 95, Windows 98, Windows Me, and

Windows NT 4.0 Users

1. Connect either a USB or parallel cable to the computer, but DO NOT connect it to

the printer. (Port location depends on the computer.)

2. Turn on the computer.

3. Insert the Canon Creative CD-ROM into your CD-ROM drive. Wait for your CD-ROM

drive to start up.

4. When you see this screen, click Next.

If you do not see this screen, see the

Installation Tips following step 6B.

5. When you see this screen, connect your interface cable to the printer.

6. Connect the free end of the USB or parallel cable to the printer.

USB Cable Users: Please wait a few minutes while your computer performs steps necessary for

completing USB installation.

7. After connecting the interface cable, click Next.

8. Continue to follow the on-screen instructions. Setup includes:

• Canon S450 Installation

• Product Registration

• Canon Creative Installation

9. After installing software, you may be asked to restart your computer.

B - Windows 2000 Users

1. Connect either a USB or parallel cable to the computer (port location depends on

the computer), and then connect it to the printer.

2. Turn on the computer.

3. The Found New Hardware Wizard screen

appears. Click Next.

Note: If you do not see this screen, skip to step

8.