Brickcom OSD-200A 20xp Datasheet

2 Megapixel Speed Dome

Network Camera

OSD-200A 20xp

Easy Installation Guide

1

Step 1. Check Package Contents

a. Network Camera

b. M3 Standard Screw (x1)M3 Security Screw (x1)

M5 Standard Screw (x1)

M5 Security Screw (x1)

Security Torx

Lubricant

c. Waterproof Rubber

d. Power

Connector

Alarm I/O

Connector

Audio

Connector

e. Outdoor Mount

Kit

f. Easy Installation

Guide

g. Product CD

h. Warranty Card

English

2

<Bottom View>

Please refer to the illustrations below to

connect power core through the supplied

power adaptor, and set up the audio

according to the Audio pin definition.

<Power Connector>

<Audio Connector>

NOTE: To power up the camera, please plug the AC 24V cable into the camera’s

power connector (Operating Temperature: -40℃-50℃); Or connect the Ethernet

cable to the camera’s Ethernet port and plug the other end of cable into an IEEE

802.3at High Power over Ethernet (PoE plug)switch (Operating Temperature: -7℃

-50℃)

3

<Alarm I/O Connector>

When cabling, please refer to the table below for pin definition of Alarm I/O setting.

Please make sure the alarm connections are properly.

Step 2. HW Installation

1. Apply lubricant to the Dome cover’s water-proof rubber to make the installation

process smoother.

NOTE: The tiny protrusion on the dome cover must align with one of the four holes

on the dome body.

4

2. Attach the Dome cover to the Dome body by gently pressing down on the sides of the

Dome cover with both hands.

NOTE: DO NOT press the cover from the top as this may cause damage to the

Dome body.

3. Screw the Dome cover and body together.

Step 3. Install Camera with Mount Kit.

1. Make a cable entry hole on the wall/ ceiling to insert the cable(s).

2. Attach the waterproof rubber to the selected mount kit.

3. Route the Ethernet and I/O cables through the top holder and join the selected mount

kit with supplied screws and washers. Then adjust the Waterproof Rubber over the

joint.

4. Connect the Ethernet and I/O cables and hook the safety wired to the camera.

5. Attach the camera to the top cover with the supplied screw and washers.

5

Wall Mounting: Pendant Mount (mounting example)

NOTE: Refer to the mounting instruction in the “Speed Dome Mounting Accessories

Installation Guide” for more details.

6

Step 4. Install the EasyConfig Software

Insert the CD into the CD-ROM, and follow the instructions of the Install Shield Wizard to finish

installation.

Step 5. Launch EasyConfig

Launch the EasyConfig software, and click on the camera from the survey list to connect.

7

Step 6. Installation Completed

Click <Live View> to view the live video feed of the network camera.

Enter the default user name (admin) and password (admin) in the prompt request dialogue.

After connecting to the network Speed Dome Camera, the request for installing the ActiveX control

will appear below the URL bar. Right click on the bar, and click “Install Brickcom ActiveX Control..”to

permit ActiveX control installation.

In the pop-up security warning window, click “Install”to start downloading DC Viewer software on the

PC.

Click “Finish”after DC Viewer installation is complete.

Table of contents

Other Brickcom Security Camera manuals

Brickcom

Brickcom FB-100Ae Series Datasheet

Brickcom

Brickcom FD-100A Series User manual

Brickcom

Brickcom OB-E200Nf-S Datasheet

Brickcom

Brickcom OB-500Af Series Datasheet

Brickcom

Brickcom CB-100A Series User manual

Brickcom

Brickcom FB-130Np Series User manual

Brickcom

Brickcom OSD-200 20xp User manual

Brickcom

Brickcom FB-H200Np-S-WDRPro Datasheet

Brickcom

Brickcom OB-130Np Instructions for use

Brickcom

Brickcom OB-302Ae V5 Series Instructions for use

Brickcom

Brickcom VD-100A Instructions for use

Brickcom

Brickcom VD-E200Af series Instructions for use

Brickcom

Brickcom VD-131Af User manual

Brickcom

Brickcom OB-502Ae V5 Series Instructions for use

Brickcom

Brickcom Outdoor Bullet V2 Series Datasheet

Brickcom

Brickcom OB-100A User manual

Brickcom

Brickcom VD-E200Af series Datasheet

Brickcom

Brickcom CB-101A Series User manual

Brickcom

Brickcom Economy Outdoor Bullet Series Datasheet

Brickcom

Brickcom WCB-100A User manual

Brickcom

Brickcom FB-100A Series User manual

Brickcom

Brickcom MD-500Ap Series Instructions for use

Brickcom

Brickcom VD-130Af User manual

Brickcom

Brickcom OB-500Af V5 Series Datasheet

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications