Brickcom MD-500Ap Series Datasheet

- 1 -

Easy Installation Guide

Megapixel Day & Night

Mini Dome Network Camera

MD-500Ap & MD-300N Series

- 2 -

Package Contents

Step 1.Please check to make sure that the product package contains all the accessories listed

below.

a. MD-500ASeries/ MD-300Np Series

b. Product CD

c. Adjusting Lens Tool

d. Allen Key

e. Warranty Card

f. Screw Bags(2pcs)

g. Dry Bag / Double-Sided Tape

h. Alignment Sticker

i. Easy Installation Guide

j. Mounting Adapter

k. TV out Connector Cable (Optional)

l. M12* / RJ-45** Connector (Optional)

- 3 -

Step 2. Hardware Installation

WARNING: Do not mount the camera on a soft material. The camera may fall and be

damaged.

Use the enclosed Allen key to detach the dome cover from the camera device.

As remove the cover, please be aware of the Microphone Line.

1. Remove the dry bag from its package. Use the double-sided tape to stick the dry bag

onto the designate position inside of the dome cover.

2. Choose the location on the wall or ceiling to place the camera. Attach the location sticker

to the desired spot. For ceiling installation, the best place to mount the camera is into a

ceiling stud.

- 4 -

3. Drill three holes through the center of the three location holes on the sticker.

4. Hammer the three plastic anchors which are provided in the product package into the

three location holes.

5. Please use the “Waterproof Tape”to wrap around the RJ45 connector, DC12V connector, USB

connector (*), in order to prevent water to seep in to the connectors.

6. The user needs the three screws which are included in the product package and a

screwdriver. Mount the camera on the wall or ceiling and position the three screw slots

over the plastic anchors. Insert the screws into the holes and use the screwdriver to

tighten the screws clockwise until they are secure.

- 5 -

7. If you use the Mounting Adapter, please use the three screws which are included in the

product package and a screwdriver. Mount the camera on the wall or ceiling and

position the three screw slots over the plastic anchors. Insert the screws into the holes

and use the screwdriver to tighten the screws clockwise until they are secure.

Lens Adjustment

1. Please use the”Adjusting Lens tool”to adjust the lens to the desired position.

2. Focus

a. Rotate the lens until the image in the Live View page is focused.

b. Remove the tool directly.

- 6 -

Step 3.Camera Connection

The New Mini Dome Series is DC12V and PoE compliant, so there are two options for

connecting the camera to a power and Ethernet source. The camera can either be

connected to a PoE-enabled switch or a non-PoE switch.

a. If using a PoE-enabled switch:

Use a single Ethernet cable to connect the camera to the PoE-enabled switch.

b. If using a non-PoE switch:

i. Use a standard RJ-45 cable to connect the camera to a PoE Injector.

ii. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch.

iii. Use a standard power cable to connect the PoE Injector to a power outlet.

- 7 -

c. If using the DC12V for the power Supply. The RJ45 cable will be data

transmission.

Complete the Installation

Place the dome cover back on the camera device using the Allen Key.

Step 4.Install the EasyConfig Software

Insert the CD into the CD-ROM, and follow the instructions of the InstallShield Wizard to finish

installation.

Step 5.Launch EasyConfig

Launch the EasyConfig software, and click on the camera from the survey list to connect.

Follow the EasyConfig software to configure the camera’s IP address and EasyLinkTM settings.

Step 6.Installation Completed

Click <Live View> to view the live video feed of the network camera.

Other manuals for MD-500Ap Series

This manual suits for next models

Table of contents

Other Brickcom Security Camera manuals

Brickcom

Brickcom MD-500Ap Series User manual

Brickcom

Brickcom OSD-200A 20xp Datasheet

Brickcom

Brickcom Fixed Dome Series Datasheet

Brickcom

Brickcom VD-130Af User manual

Brickcom

Brickcom WFB-100A User manual

Brickcom

Brickcom PZ-040 12x Series User manual

Brickcom

Brickcom Outdoor Bullet V2 Series Datasheet

Brickcom

Brickcom PoE Cube CB-101Ap v2.1 User manual

Brickcom

Brickcom OB-E400AF Instructions for use

Brickcom

Brickcom VD-100A Instructions for use

Brickcom

Brickcom VD-100A User manual

Brickcom

Brickcom Economy Outdoor Bullet Series Datasheet

Brickcom

Brickcom VD-E200Af series Datasheet

Brickcom

Brickcom Mini Dome Series User manual

Brickcom

Brickcom FB-100A Series User manual

Brickcom

Brickcom Bullet Series Instructions for use

Brickcom

Brickcom FB-Series Datasheet

Brickcom

Brickcom VD-131Af User manual

Brickcom

Brickcom Hydra Series Installation manual

Brickcom

Brickcom Vandal Dome Series Datasheet

Brickcom

Brickcom FD-100A Series User manual

Brickcom

Brickcom CB-500A Series User manual

Brickcom

Brickcom FB-H200Np-S-WDRPro Datasheet

Brickcom

Brickcom OSD-040 36x Series User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications