B+K precision 600 User manual

12V SLA

Battery Capacity

Analyzer

INSTRUCTION

MANUAL

Refer to the Front view of the unit.

1) AH Range : With this key the user can select the

correct AH range according to the battery

under test.

2) Select LED:This LED glows toindicate that user can

select the AH range.

3) Locked LED:This LED is ON when the unit locks to a

particular AH range set by the user.

4) Display Mode:This key selects the display either as

No load voltageor % balance

capacity.

5) Batt. Voltage:When displayindicates Batt. voltage this

LED glows.

6) % Balance Capacity:This LED glows when remainingcapacity

is displayed.

7) Load Test:The test startsby pressing this key.

8) Ready:When this LED glows steadily, it indicates

thatthe unit is ready to conduct a test.

9) Test On: This LED glows for approx. 2 sec. when

the battery test is carried out.

10) Reverse Polarity:If the unitis connected to a battery in

reversepolarity this LED

2.2 OPERATING PROCEDURE

Follow the steps as outlined below :

2.2.1 Connection Procedure Connect Battery Capacity

Analyser (600) to Battery UnderTest(BUT). Connect the

+ve terminal of 600 to +ve terminal of Battery. Connect-ve

terminal of 600 to –ve terminal of Battery. The 600 will be

powered with the BUT. On Power up, 600 performs a self

test by turning on the 7 segments, LEDs one after another

& finally flashing the version number.

Caution: Do not connect the +ve terminal of 600 to _ve

terminal of BUT and _ve terminal fo 600 to +ve terminal of

BUT. On doing so, the ‘Reverse Polarity’ LED glows as

shown.

2.2.2 Selecting AH Capacity

Press the 'AH Range' key. The select LED glows as

shown.

The display will show the last selected/stored AH value.

(Power ON default value is 7 AH)

To change the value to say 100 AH press the key again.

Display shows new value. Keep on pressing till the

desired AH is obtained.

To Lock the AH capacity, either press any key OTHER

than the AH Range key OR wait for about 10 seconds.

Your selected AH value

will automatically get lockedLocking is indicated by the

glowing of 'Locked' LED.

2.2.3 Conducting a Test

Test can be conducted any time by pressing the “Load

Test” key.

By doing so the ‘Test On’ LED starts glowing.

Typically, it glows for about 2 seconds. Thereafter the

‘Ready’ test starts blinking.

(The blinking time depends on the AH range slsected).

Thereafter it becomes steady.

Note: User cannot conduct a test while the ‘Ready’ LED is

blinking.

2.2.4 Observing Result After a Test

By default the Batt. Voltage is displayed on the display. To

observe the Balance Capacity left, press the ‘Display Mode’

switch.

The display will show the capacity in percentage.

Note: Balancce Capacity can have a meaningful value only after

conduction of a test. At power on, a value of 0 is shown. Hence

Balance Capacity should be seen only after conduction of a

test. To observe No Load Batt. Voltage, press the ‘Display

Mode Key’. The display willshow the No Load Batt. Voltage.

2.3 CAUTION

1) Do not connect Model 600 to a voltage source more than 20V.

2) Do not connect the unit to a battery connected in circuit.

Other manuals for 600

Other B+K precision Measuring Instrument manuals

B+K precision

B+K precision 601 User manual

B+K precision

B+K precision 2652A User manual

B+K precision

B+K precision 308A User manual

B+K precision

B+K precision 879B User manual

B+K precision

B+K precision 878B User manual

B+K precision

B+K precision 601B User manual

B+K precision

B+K precision 467 User manual

B+K precision

B+K precision 830C User manual

B+K precision

B+K precision 310 User manual

B+K precision

B+K precision 894 User manual

B+K precision

B+K precision Sefram DAS1800 User manual

B+K precision

B+K precision 2650 User manual

B+K precision

B+K precision DAS30 User manual

B+K precision

B+K precision 8540 User manual

B+K precision

B+K precision 732A User manual

B+K precision

B+K precision 2708B User manual

B+K precision

B+K precision DAS60-P User manual

B+K precision

B+K precision 600B User manual

B+K precision

B+K precision 1050 User manual

B+K precision

B+K precision 5335B User manual

B+K precision

B+K precision PR-55 User manual

B+K precision

B+K precision 313C User manual

B+K precision

B+K precision 4063 User manual

B+K precision

B+K precision 8500B Series User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual