Bosch NBC-455 User manual
Dinion IP Camera
NBC-455
en Installation and Operation Manual
Dinion IP Camera Table of Contents | en 3
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
Table of Contents
1Safety 8
1.1 Safety precautions 8
1.2 Important safety instructions 9
1.3 Connection in applications 10
1.4 FCC & ICES compliance 11
1.5 UL certification 13
1.6 Bosch notices 14
1.7 Copyrights 15
2 Introduction 16
2.1 Features 16
3 System Information 18
3.1 Overview of functions 18
3.1.1 Progressive scan 18
3.1.2 Tri-streaming 18
3.1.3 ONVIF (Open Network Video Interface Forum) 18
3.1.4 Audio 18
3.1.5 Alarm I/O 18
3.1.6 Tamper detection and motion detectors 19
3.1.7 Video encoding 19
3.1.8 Multicast 19
3.1.9 Power-over-Ethernet 19
3.1.10 Data interface 19
3.1.11 Encryption 19
3.1.12 Receiver 20
3.1.13 Recording 20
3.1.14 Snapshots 20
3.1.15 Backup 20
3.1.16 Configuration 20
3.2 Operation with external systems 21
4en | Table of Contents Dinion IP Camera
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
4 Planning 23
4.1 Unpacking 23
4.2 System requirements 24
4.3 Install players 25
5 Installation 26
5.1 Network (and power) connector 26
5.2 Power connector 27
5.3 Alarm and relay connector 28
5.4 Audio connectors 29
5.5 Video service monitor connector 30
5.6 Data connector 31
5.7 Lens mounting 32
5.8 Mounting the camera 33
5.9 Using the camera install menu 34
5.10 Back focus adjustment 34
5.11 Lens adjustment 35
5.11.1 DC-iris lens 35
5.11.2 Manual-iris lens 35
5.11.3 Video-iris lens 36
5.12 Reset button 36
6 Camera set-up 37
6.1 Camera menu navigation 37
6.2 Install menu 38
6.2.1 Lens Wizard submenu 38
6.2.2 Network submenu 40
6.2.3 Defaults submenu 40
7 Browser connection 41
7.1 System requirements 41
7.2 Establishing the connection 42
7.2.1 Password protection in camera 42
7.3 Protected network 42
7.4 Connecting to a hardware decoder 43
Dinion IP Camera Table of Contents | en 5
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
7.4.1 Alarm connection 43
7.5 Connection established 44
7.5.1 LIVEPAGE 44
7.5.2 RECORDINGS 44
7.5.3 SETTINGS 44
8 Basic Mode 46
8.1 Basic Mode menu tree 46
8.2 Device Access 47
8.2.1 Camera name 47
8.2.2 Password 47
8.3 Date/Time 48
8.4 Network 49
8.5 Encoder Profile 50
8.6 Audio 50
8.7 Recording 50
8.7.1 Storage medium 50
8.8 System Overview 50
9 Advanced Mode 51
9.1 Advanced Mode menu tree 51
9.2 General 53
9.2.1 Identification 53
9.2.2 Password 53
9.2.3 Date/Time 54
9.2.4 Display Stamping 56
9.3 Web Interface 58
9.3.1 Appearance 58
9.3.2 LIVEPAGE Functions 59
9.3.3 Logging 60
9.4 Encoder 61
9.4.1 Privacy Masks 61
9.4.2 Encoder Profile 61
9.4.3 Encoder Streams 65
9.5 Audio 66
9.6 Camera 67
6en | Table of Contents Dinion IP Camera
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
9.6.1 ALC 67
9.6.2 Enhance 68
9.6.3 Color 68
9.6.4 Installer Options 69
9.7 Recording 70
9.7.1 Storage Management 70
9.7.2 Recording Profiles 73
9.7.3 Retention Time 74
9.7.4 Recording Scheduler 75
9.7.5 Recording Status 76
9.8 Alarm 77
9.8.1 Alarm Connections 77
9.8.2 Video Content Analyses (VCA) 80
9.8.3 VCA configuration- Profiles 81
9.8.4 VCA configuration - Scheduled 87
9.8.5 VCA configuration - Event triggered 89
9.8.6 Audio Alarm 90
9.8.7 Alarm E-Mail 91
9.8.8 Alarm Task Editor 93
9.9 Interfaces 94
9.9.1 Alarm input 94
9.9.2 Relay 94
9.9.3 COM1 95
9.10 Network 96
9.10.1 Network 96
9.10.2 Advanced 100
9.10.3 Multicasting 101
9.10.4 JPEG Posting 102
9.10.5 Encryption 103
9.11 Service 104
9.11.1 Maintenance 104
9.11.2 Licenses 106
9.11.3 System Overview 106
10 Operation via the browser 107
10.1 Livepage 107
Dinion IP Camera Table of Contents | en 7
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
10.1.1 Processor load 107
10.1.2 Image selection 108
10.1.3 View Control 108
10.1.4 Digital I/O 108
10.1.5 System Log / Event Log 108
10.1.6 Saving snapshots 108
10.1.7 Recording video sequences 109
10.1.8 Running recording program 109
10.1.9 Audio communication 109
10.2 Recordings page 110
10.2.1 Controlling playback 110
11 Troubleshooting 112
11.1 Function test 112
11.2 Resolving problems 113
11.3 Customer service 115
12 Maintenance 116
12.1 Testing the network connection 116
12.2 Communication with Terminal Program 116
12.3 Repairs 118
12.3.1 Transfer and disposal 118
13 Technical Data 119
13.1 Specifications 119
13.1.1 Dimensions 122
13.1.2 Accessories 123
Glossary 124
8en | Safety Dinion IP Camera
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
Dinion IP Camera Safety | en 9
Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Follow all warnings on the unit and in the
operating instructions before operating the unit.
1. Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.
2. Do not install unit near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
3. Never spill liquid of any kind on the unit.
4. Take precautions to protect the unit from power and
lightning surges.
5. Adust only those controls specified in the operating
instructions.
6. Operate the unit only from the type of power source
indicated on the label.
7. Unless qualified, do not attempt to service a damaged unit
yourself. Refer all servicing to qualified service personnel.
8. Install in accordance with the manufacturer's instructions
in accordance with applicable local codes. Use only
attachments/accessories specified by the manufacturer.
Equipment change or modification could void the user's
guarantee or authorization agreement.
10 en | Safety Dinion IP Camera
AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems
1.3 Connection in applications
Power lines: An outdoor system should not be located in the
vicinity of overhead power lines, electrical lights, or power
circuits, or where it may contact such power lines or circuits.
When installing an outdoor system, extreme care should be
taken to keep from touching power lines or circuits, as this
contact may be fatal.
U.S.A. models only - refer to the National Electrical Code Article
820 regarding installation of CATV systems.
12 VDC / 24 VAC power source: This unit is intended to
operate with a limited power source. The unit is intended to
operate at either 12 VDC or 24 VAC (if PoE is not available).
User supplied wiring must be in compliance with electrical
codes (Class 2 power levels). If 24 VAC is used, do not ground
the 24 VAC supply at the terminals or at the unit's power supply
terminals.
PoE: Use only approved PoE devices. Power-over-Ethernet can
be connected at the same time as a 12 VDC or 24 VAC power
supply.
CAUTION!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
Other manuals for NBC-455
1
Table of contents
Other Bosch IP Camera manuals
Bosch
Bosch MIC-7130 User manual
Bosch
Bosch 200 Series User manual
Bosch
Bosch FlexiDome NDN-498V03-21P User manual
Bosch
Bosch NWC?0495 User manual
Bosch
Bosch AN traffic 4000 IR User manual
Bosch
Bosch NBC-225-P User manual
Bosch
Bosch Onvif NTC-255-PI Instructions for use
Bosch
Bosch NUC-52051-F0E User manual
Bosch
Bosch MegaPixel NWC-0800 User manual
Bosch
Bosch NII-41012-V3 User manual
Bosch
Bosch FLEXIDOME IP NIN-70122 User manual
Bosch
Bosch NTC-265-PI User manual
Bosch
Bosch NDN-921 User manual
Bosch
Bosch Autodome IP 4000 HD Mounting instructions
Bosch
Bosch FLEXIDOME multi 7000i User manual
Bosch
Bosch MIC Series 550 User manual
Bosch
Bosch NDC-455 User manual
Bosch
Bosch NWC-0495-20P User manual
Bosch
Bosch NDC-225-PI User manual
Bosch
Bosch Infrared Imager EX80 User manual
