BEINAT NASE30/K User manual

Since the human being discovered the GAS, he has noticed its usefulness and since then he uses it for cooking,

warming, and today in the industrialization.

But he has also discovered its dangerousness

To carry it the common people turn to technicians who need to be assured that their work is free of dangers

To do this we need a reliable and secure control tool.



The BEINAT S.r.l. with its prestige that for over forty years distinguishes it and from the concept "equipment

fitness" has created a sophisticated gas detector, which in addition to detect the leak, measures the amount

of gas present in the environment.

It is available in the version:

NASE30/K explosive gas concentration meter, powered with 3 non-rechargeable alkaline batteries

NASE25/K explosive gas concentration meter, powered with rechargeable LiPo battery

Gas concentration Gauge

The technology of this instrument and its precision in detection are due to a catalytic sensor whose response

is managed by a microcontroller.

When an explosive gas is detected, in addition to emitting an acoustic signal, the display lights up in a flashing

red color, and indicates the percentage concentration of in ambient.

Reading from 3% to 100% of LEL. with a resolution of 1% of LEL.



The reading can also be performed in a low lighted environment as the display is backlit.

The discharge of the battery is controlled by the microprocessor reporting on the display the percentage of

charge.

Gasometer 1920

Belonging

Portable Gas Meter NASE30/K - NASE25/K

Rev 2

CONFORMITY



EN 50270

EN 50194

Userguideand

maintenance

Thank you for choosing the BEINAT S.r.L. digital tool, model NASE30/K

Important Note

Read these instructions carefully before use and always keep them within hands reach while using the

instrument.

The illustrations and texts shown on the screens in this manual may differ from those actually displayed.

The brand products BEINAT S.r.L. comply with European Directives ROHS 2002/95/EC, REACH 1907/2006,

BATTERIESAND ACCUMULATORS 2006/66/EC RAEE 2003/96/EC

Page 2

Technical specifications

To prevent damage to the product or injury to you and to third persons, before using the device read them carefully

and in their entirety the following warnings, related to security

Keep them safe so they are available for consultation by anyone before using the appliance.

Immediately turn off the appliance in the event of malfunctioning.

In the event you detect smoke or a pungent or unusual odour coming from the appliance or power supply (optional

accessory):

Immediately turn off the detector and send to the nearest Service Centre.

Do not try to dismantle the appliance.

Contact with internal components of the detector can cause injury. In the event of faults, the product should only

be repaired by qualified personnel.

If the device is broken due to a fall or crash, consult the Service Centre for the necessary repairs.

Avoid contact with liquid crystals.

In the event the display breaks, pay attention not to injure yourself with the glass fragments and avoid the liquid

crystals coming in contact with your skin, eyes or mouth.

To serve you long and satisfaction of your digital equipment, use it and store it keeping in mind the following

precautions.

CHECK the integrity of the probe after having removed it from the box.

Any use of the detector for purposes other than the intended one is considered improper, and as a result of which

BEINAT S.r.l. therefore disclaims any responsibility for possible damages caused to people, animals or objects.

Do not allow it to become wet. The detector can be seriously damaged as it is not waterproof either when

immersed in water or exposed to high levels of humidity.

Do not drop it. Heavy knocks on hard surfaces and strong vibrations can damage the appliance.

Avoid strong magnetic fields. This detector should not be used or stored near radiation, or intense magnetic

fields. Static electricity or magnetic fields generated by appliances such as radio transmitters can interfere with

measurements, may damage data recorded, and internal circuits.

Above a certain temperature (+ 45 ° C about) the monitor becomes black, to make it visible again function you

must cool it by placing it in the refrigerator for a few minutes.

Cleaning Never clean the device with chemical products. If necessary, wash with a moist cloth.

For your safety

NASE30/K Powered by 3 AAA Alkaline batteries ......................................................................... 4,5 V

Power demand during explosive gas detection ............................................................................ 190 mA

Standby power demand ....................................................................................................... 170 mA

Battery autonomy ............................................................................................................. 6 hours approx

Control battery level .......................................................................................................... On display

NASE25/K Powered by LiPo battery ........................................................................................... 3,7V

Power demand during explosive gas detection ........................................................................... 190 mA

Standby power stand by ......................................................................................................... 170 mA

Battery autonomy ...................................................................................................... 8 hours approx

Battery charger ...................................................................................................................... via PC

Optional battery charger not supplied ................................................................. External 5 VDC 350 mA

Charging time ....................................................................................................................... 7 hours

Control battery charge and discharge .................................................................................. On display

Catalytic type flexible detection sensor .................................................................................... Incorporated

Positive Explosion Safety ......................................................... Protected Sensor with Anti-Flame Retina

Measuring range .............................................................................................from 3% to 100% of LEL

Resolution ......................................................................................................................... 1% of LEL

Response time ........................................................................................................................... 0.5 "

Display ............................................................................. backlit LCD

Operating temperature ............................................ -20 ° C ÷ + 45 ° C

Auto-off function in explosive gas detection mode .......... after 10 minutes

Dimensions and weight ....................................... 67*135*35 mm, 70 gr

NASE

135

Gauge GAS function

Press the button to turn on or turn off the instrument, press and hold for 5 seconds..

GAS concentration Gauge commands

NASE

If the device doesn’t turn on.

Check the condition of the batteries. If near discharge then replace them.

Note: With a low battery level, gas measurement might not be reliable.

Gas is not being detected.

Check that the capsule is working. If burnt, “FAU” appears on the display.

In the event other problems arise, directly contact a specialist and/or authorised technician or your

BEINAT S.r.l. dealer.

20 LEL FAU

Normal condition Normal Illuminated

Alarm condition Fault condition

Display not illuminated

and in the absence of gas. Illuminated display

and in the absence of gas.

To illuminate the display

Press the button

The yellow illuminated

display with the word FAU

represents a sensor fault

Display

Red illuminated display

represents the concentration

of gas expressed in LEL.

With increasing LEL

increases the frequency of

acoustic signal.

Page 3



Explosive GAS detection

When you turn on the appliance you will see a COUNT DOWN starts on the display lasting about 30 seconds

(pre-heating). When complete, the instrument is ready for use.

Hold the detector in your hand at an average height from the ground to detect any gas dispersed in air or

bring the tip of the flexible antenna near the probable sources of leak which:

- Pipes

- Couplings

- Joints

- Solenoid valves

If the instrument detects a leak, the percentage of GAS LEL appears on the display, along with an

intermittent sound that is more or less frequent depending on the amount detected.

Together with the sound, the display lights RED color.

Backlight

Pressing the button turns on the backlight in green color with a duration of 5 seconds.

Display of the battery discharge status

A battery symbol is displayed on the display.

When the batteries are new the symbol is full and it empties with the use of batteries.

When near discharge, the symbol will be flashing, and when the batteries are completely discharged

the symbol will be empty.

Note: The device will have an auto shut down after 10 minutes of inactivity (no button pressure and no gas

detection).

BE-Rev 3 11 2021

Business - info@beinat.com

Help Desk - laboratorio@beinat.com

BEINAT S.r.l.

Via Fatebenefratelli 122/C 10077, S. Maurizio C/se (TO) -

ITALY

Tel. 011.921.04.84 - Fax 011.921.14.77

http:// www.beinat.com

IP44 Madein Italy

Lo styling è della b & b design

Stamp and signature of the dealer

Date of purchase:

Serial number:

Beinat S.r.l. following the purpose of improving its products, reserves the right to change the technical, aesthetic and functional characteristics

at any time and without giving any notice.

Concentration gauge NASE30/K - NASE25/K

INSURANCE. This device is insured by the SOCIETÀ REALE MUTUA for the PRODUCT'S GENERAL LIABILITY

up to a maximum of 1,500,000.00 EURO against damages caused by the device in case of failures in functioning.

WARRANTY. The warranty term is 3 years from manufacturing date, in agreement with the following

conditions. The components acknowledged as faulty will be replaced free of charge, excluding the replacement

of plastic or aluminium cases, bags, packing, batteries and technical reports.

The device must arrive free of shipment charges to BEINAT S.r.l.

Defects caused by unauthorized personnel tampering, incorrect installation and negligence resulting from

phenomena outside normal functioning shall be excluded from the warranty.

BEINAT S.r.l. is not liable for possible damage, direct or indirect, to people, animals, or things; from product

faults and from its enforced suspension of use.

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT.

This symbol on the product or its packaging to indicates that this product shall not be treated as household waste. Instead, it shall be handed over to

the applicable collection point for the recycling of electrical and electronic equipment, such as for example:

- sales points, in case you buy a new and similar product

- local collection points (waste collection center, local recycling center, etc...).

By ensuring this product is disposed of correctly, you willhelpprevent potential negative consequence for the environment and human health, which could

otherwise be caused by inappropriate waste handing of this product. The recycling of materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased

theproduct.

Attention: in some countries of the European Union, the product is not included in the field of application of the National Law that applies the European