Features Of The Motherboard
This product is based on the “Micro ATX” form factor. It features
the advanced Multimedia function and provides support for
business PC maker. This motherboard incorporates Intel 810-
DC100 chipset. Providing features such as integrated 2D/3D AGP
VGA controller, Ultra DMA 33/66 IDE Interface, ACPI power
management, and PCI 3D sound support.
Processor (+Cache)
lSingle Intel Socket-370 mechanism for Intel Celeron Processor.
lSupport 66/100 MHz FSB
Chipset
lIntel 810 Chipset includes GMCH0 (Memory Controller Hub), ICH(I/O Controller Hub)
and FWH(Firm Ware Hub).
lWinbond W83627F-AW super I/O Controller.
lSoftware Audio and Hardware AC’97 V2.1 CODEC.
System Memory
lTwo 168-pin DIMM sockets.
lMinimum 8MB up to maximum 512 MB Memory Capacity.
l100MHz SDRAM DIMM module.
Graphics Support
lIntegrated H/W 3D AGP Graphic controller (2x mode)
lSupports AGP(Accelerated Graphics Port) for increased performance of Graphic Displays,
special 3D operations in multimedia, and higher speed to satisfy the users optical vision.
lSupports 3D hyper pipelined architecture, parallel data processing and compression,
precise pixel interpolation, full 2D hardware acceleration land motion video compression.
PCI Bus Master IDE Controller (I/O controller Hub)
lTwo PCI Bus Master IDE Ports(Up to 4 IDE Devices) for Tape Backup machines and
CD-ROMs. Either the 5.25-inch or 3.5 inch(1.44MB or 2.88MB) floppy drives can be
used without requiring an external card. Additionally, Floppy 3 mode (Japanese standard
3.5 inch disk drive, 1.2MB) and LS-120 floppy disk drives(3.5 inch disk drive: 120MB,
1.44MB, 720K) are also supported.
lSupport Ultra DMA 33/66 MB/sec (ATA33/ATA66)
lSupport PIO Mode3,4, run in 17MB/sec. (Max)
Integrated I/O
lLPC revision 1.0 super I/O controller.
l1 Floppy Port (up to 2.88 MB), 1 Parallel Port (ECP/EPP).
l2 Serial Ports (16C550 Fast UART Compatible).
l1 IrDA TX/RX Port. (option, shared with COM2)
l1 PS/2 Mouse Connector, 1 PS/2 Keyboard connector.
