9
The instrument performs frequency analysis of either 1/1- or 1/3-octave spectra (Leq, Lmax, Lmin) with one of the avail-
able frequency weightings (A, B, C, Z) and time weightings (F, S).
The instrument takes single measurements. In other words, the instrument calculates a single value for each measured
parameter for the total measurement time.
The instrument takes logged measurements. In other words, it has a logging mode that can average and log intervals of
broadband and/or spectral data to obtain a profile of the total measurement with logging intervals between 1 s and 1
min.
The instrument performs statistical analysis on either LAeq, LAF or LAS with calculation of 5 user-defined percentile
levels.
The instrument takes audio recordings.
Standards
Go to: Menu >About >Standards
Here you will see the complete list of standards to which the instrument conforms.
About the Mobile App
The mobile app interfaces with the instrument, making remote measurements possible and making it easier to change
settings and interact with the data. It is recommended that you use the mobile app whenever possible.
Functionality of the mobile version of Enviro Noise Partner:
lSet up the instrument for measuring
lControl the instrument remotely
lAnnotate measurements (add photos, videos, notes and commentary)
lAdd markers to measurements
lCustomize markers (name and type)
lTrack position and time using GPS
lSee the status of the instrument
lView:
lInstantaneous broadband parameters
lTotal broadband parameters
l1/3- and 1/1-octave spectra
lLogging profiles
lRecall past data stored on the instrument
Introduction:About
