Badger Meter ORION SE Installation and user guide
ORION® SE
Integral Endpoint for American® Residential Gas Meters
Installation Data
ORI-I-56 (1-11)
62014-097 Rev. 3
IMPORTANT:
This manual contains important information.
READ AND KEEP FOR REFERENCE.
ORION® SE Integral Endpoint for American® Residential Meters
Page ii (1-11)
Installation Data
CONTENTS
DISCLAIMER .....................................................................................................................................5
QUESTIONS OR SERVICE ASSISTANCE ...........................................................................................5
PRODUCT IDENTIFICATION.............................................................................................................5
SCOPE OF MANUAL .........................................................................................................................5
PRODUCT UNPACKING AND INSPECTION......................................................................................6
LICENSE REQUIREMENTS ................................................................................................................6
INSTALLATION TOOLS AND MATERIALS ........................................................................................6
LABEL INFORMATION ......................................................................................................................6
AMERICAN GAS METERS .................................................................................................................7
Meter and Indexes Before Endpoint............................................................................................................................7
Index Removal From an American Gas Meter ............................................................................................................7
ORION AMERICAN METER INSTALLATION MATERIALS ................................................................9
ASSEMBLE THE ORION ENDPOINT AND INDEX ...........................................................................10
Endpoint Gaskets Attachment.....................................................................................................................................10
Place Four (4) Screws Into the Endpoint .....................................................................................................................11
INDEX INSTALLATION ....................................................................................................................12
Place Screws in Slotted Index ......................................................................................................................................12
Place Screws in Index With Holes.................................................................................................................................12
Drive Pawl Engagement And Index Installation ........................................................................................................13
PLACE THE ENDPOINT AND INDEX ON AN AMERICAN GAS METER...........................................14
Placing a Two-Feet Dial ................................................................................................................................................15
Placing a One-Foot Index.............................................................................................................................................15
PLACE THE COVER OVER THE ENDPOINT AND INDEX.................................................................16
PROGRAM THE ENDPOINT ............................................................................................................17
INSERT TAMPER PLUGS .........................................................................................................18
INSTALLATION COMPLETE ............................................................................................................18
Page iii
(1-11)
ORION® SE Integral Endpoint for American® Residential Meters
Page iv (1-11)
Installation Data
DISCLAIMER
The user/purchaser is expected to read and understand the information provided in this manual, follow any listed safety
precautions and instructions and keep this manual with the equipment for future reference.
Misuse, mishandling and/or inadequate maintenance may impair performance and/or compromise safety.
QUESTIONS OR SERVICE ASSISTANCE
If you have questions regarding the product or this document contact:
Badger Meter, Inc.
P.O. Box 245036
Milwaukee, WI 53224-9536
Telephone: (414) 355-0400, (800) 876-3837
Fax: (888) 371-5982
On the Web: www.badgermeter.com or call your local Badger Meter representative.
PRODUCT IDENTIFICATION
Record the product identication numbers from the nameplate.
Endpoint:
Model Number ________________________________________
Serial Number _________________________________________
Tag Number ___________________________________________
SCOPE OF MANUAL
This manual contains installation instructions for the Badger Meter ORION® and the Badger Meter ORION® SE integral
endpoint for American® Meter residential aluminum-case gas meters. Proper performance and reliability of the ORION gas
meter system depends upon installation in accordance with these instructions.
(1-11) Page 5
ORION® SE Integral Endpoint for American® Residential Meters
PRODUCT UNPACKING AND INSPECTION
NOTE: If damage to the shipping container is evident upon receipt, request the carrier to be present when the
product is unpacked.
Carefully open the shipping package, follow any instructions that may be marked on the exterior. Remove all cushioning
material surrounding the product and carefully lift the product from the package.
Retain the package and all packing material for possible use in reshipment or storage.
Visually inspect the product and applicable accessories for any physical damage such as scratches, loose or broken parts, or
any other sign of damage that may have occurred during shipment.
NOTE: If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and le a claim with
the carrier.
A claim for equipment damage in transit is the sole responsibility of the purchaser.
LICENSE REQUIREMENTS
This device complies with Part 15 of FCC Rules. Operation of this device is subject to the following conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
No FCC license is required by a utility to operate an ORION meter reading system.
Any changes made, but not approved by Badger Meter, can void the user’s authority to operate the equipment.
CAUTION! In accordance with FCC Regulations,“Code of Federal Regulations”Title 47, Part 2, Subpart J, Section
1091, transmitters (endpoints) pass the requirements pertaining to RF radiation exposure. However, to avoid public
exposure in excess of limits for general population (uncontrolled exposure), a 12 CM distance between the
transmitter (endpoint) and the body of the user must be maintained during testing.
INSTALLATION TOOLS AND MATERIALS
Magnetized screwdrivers:
• 1/8" at screwdriver
• 1/4” at screwdriver
• #1 Phillips screwdriver
If battery powered driver is used, ensure torque maximums are not exceeded (usually 15 in-lb).
Putty knife or at blade scraper
Badger Meter handheld programmer/data collector
LABEL INFORMATION
Certication markings are noted on the product label. Label markings include:
• Serial number and bar code plus product description
• FCC identication
• Certication markings
Page 6 (1-11)
Installation Data
AMERICAN GAS METERS
Gas meter models: AL, AC, AT, AM, AR with suxes: 175, 210, 225, 250, 310, 350, 425, 630
Meter and Indexes Before Endpoint
Index Removal from an American Gas Meter
1. Use a large screwdriver to puncture and remove tamper plugs, if present.
2. Use a large screwdriver to remove and discard the four (4) mounting screws and the cover.
Tamper
Plug
Tamper
Plug
Odometer
Style Index
Dial Index
(1-11) Page 7
ORION® SE Integral Endpoint for American® Residential Meters
3. Completely remove and discard the old gasket. Use a putty knife to clean the meter surface of all gasket remnants
that might limit the eectiveness of the new gasket.
4. Use a small screwdriver to remove the index. Discard the two (2) screws.
Use a putty knife to
clean the meter surface
of all gasket remnants
that might limit the
eectiveness of the
new gasket.
Page 8 (1-11)
Installation Data
Shown below is an American gas meter with the tamper plugs, index and gasket removed.
ORION AMERICAN METER INSTALLATION MATERIALS
Rear Gasket
Endpoint
4 Screws
¼-20 X 3/8"
Front
Gasket
Index
From Existing Meter
2 Screws #8-16 X ½"
2 Screws #8-16 X ¼"
4 Screws
#8-16 X ½"
Cover
4 Tamper Plugs
OR
(1-11) Page 9
ORION® SE Integral Endpoint for American® Residential Meters
ASSEMBLE THE ORION ENDPOINT AND INDEX
Endpoint Gaskets Attachment
The gaskets should be attached to the endpoint at the factory. If the gaskets are not attached:
1. Place the rear gasket on the back of the endpoint. Place the rear gasket so the tab is at the top of the endpoint, the
drain slots are pointing down, facing towards the gas meter.
Drain Slots Pointing Down
Drain Slots Towards Gas Meter
2. Place the front gasket on the other side of the endpoint.
• Place the gasket so that its two holes go over the two protruding tines.
• Be sure the notched end goes around the guide pin on the right side of the endpoint.
Holes Over Tines Notched End Around Guide Pin on
Right of Endpoint
Tab on Top
Page 10 (1-11)
Other manuals for ORION SE
4
Table of contents
Other Badger Meter Measuring Instrument manuals
Badger Meter
Badger Meter Recordall Series User manual
Badger Meter
Badger Meter M5000 User manual
Badger Meter
Badger Meter Impeller Data Industrial 228PV Series User manual
Badger Meter
Badger Meter CORIOLIS RCT1000 User manual
Badger Meter
Badger Meter Dynasonics IS-4000 User manual
Badger Meter
Badger Meter ModMAG M Series User manual
Badger Meter
Badger Meter Industrial Oval Gear Series User manual
Badger Meter
Badger Meter DN15 User manual
Badger Meter
Badger Meter Dynasonics TFX-5000 User manual
Badger Meter
Badger Meter ORION User manual
Badger Meter
Badger Meter Blancett 1100 Series User manual
Badger Meter
Badger Meter Hedland EZ-View H915 User manual
Badger Meter
Badger Meter E Series User manual
Badger Meter
Badger Meter Blancett B2800 Standard User manual
Badger Meter
Badger Meter Register ILR 750 Owner's manual
Badger Meter
Badger Meter PRESO COIN User manual
Badger Meter
Badger Meter Vortex VN2000 User manual
Badger Meter
Badger Meter ModMAG M1000 User manual
Badger Meter
Badger Meter epm-3 User manual
Badger Meter
Badger Meter Oval Gear LM OG Series User manual
