Ayyeka Wavelet User manual
QUICK START
GUIDE
BASIC
WAVELET
KIT
March 2019
P/N 0100585 RevA2
AYYEKA
3
IMPORTANT
Contact AYYEKA SUPPORTfor technical support:
support@ayyeka.com
+1(310) 876-8040 (US)
+3140 209-1001 (EMEA)
ALWAYS COORDINATEBasicWaveletKitinstallation with
the local authority before starting installation works,which
should be completed by trained and authorized personnel.
TheWARRANTY offeredbyAyyekacoversonlyAyyeka
supplied hardware and software for the duration of the
warranty period as per the warranty terms and conditions.
AYYEKAIS NOT LIABLE for damageor injury as aresult
of handling, installation, or maintenance of its supplied
systems.
DO NOT THROWAWAY the Basic WaveletKit,as itcontains
alithium battery. Pleasedisposeofproperly.
4G (LTE)/3G/2Gcellularnetwork signalis required for
proper communication.
OPERATING TEMPERATURERANGE of -40°C to
+80°C (-40°Fto+176°F).
1
SCHEMATIC
BOTTOM
Discrete Port
Cellular Antenna
Serial Port
Analog Port
17.4 cm (6.9in)
13.3cm
(5.2 in)
7.3cm
(2.8 in)
AYYEKA
2
3
GETTING STARTED
BASIC
WAVELETKIT
12
3
WaveletDevice&
Protector
M12 FieldAttachable
SensorConnectors
(optional;part WA00180,
ordered separately)
WaveletActivator
1x
1x1x
1x
1x
1x
4M8 FemaleFieldAttachable
PowerConnector
(optional;see page16)
1x
4
Other tools and/or materials maybe required (not included):
RotaryHammer Electric ScrewDriver
5Zip Ties, Screws,and
Anchors 6CellularAntenna
(REQUIRED; ordered separately)
4x2x 4x
5
NOTE: Special Installation Locations
WEAK SIGNAL LOCATIONS:
If the Waveletis installedin
an area with weakcellular
signal,activate the Wavelet
and place in the intended
installation location with
closeddoors/access hatch
(seestep3).
Login to
home.ayyeka.com to
ensure that cellular signal
has been recentlyupdated
in the last fewminutes.
UNDERGROUND/INDOOR
WAVELET INSTALLATIONS:
Before installation, initiate
the GPSoutside by
activating the Wavelet(see
step 3).
Waitfor at least 15minutes,
then log in to the user
interface at
home.ayyeka.com to
confirm updated location
on the map.
6
TURN HERE
DO NOT
TURN HERE
1Connectthe sensor cable(s)assembly withthe field
attachable connector tothe mating panel connector on the
Wavelet.Turnthe adjustable stainless steel end pieceto
securethe field attachable connector to the Wavelet.
CAUTION: Do not turn the blackplastic hood of the
connector. Turning the blackhood maycausethe wiresto
disconnect, break, and/or damage the connector pins.
SENSORCONNECTION
7
EXTERNALANTENNA CONNECTION
Connect the Cellular antennato the antenna port (ANT1).
2
AYYEKA
3Place the magnetic WaveletActivator on the embossed
Ayyekalogo on the frontofthe Waveletenclosure.Wavelet
will initiate a 15minute test mode of high frequency
sampling and transmission.The devicewill then return toits
default configuration.
8
IMPORTANT NOTE:
The antenna does not appear in the remaining depictions
in this guide, but should remain connected once properly
secured tothe appropriate panelconnectors.
Cellular Antenna
(required)
Other manuals for Wavelet
1
Table of contents
Other Ayyeka Measuring Instrument manuals
