AVHzY CT-2 User manual
Enter
L/- R/+
USB-C
Out
USB-C
In PD Trigger
OFF/ON
AVHzY CT-2 Quick Start Guide v1.76
Press
Press
Press
Press
Press
Press
Press
Press Twice
Press Twice
Press
Twice
Press and
hold 3S
It is a fatal mistake to operate the product as follows:
1. After high voltage triggered, the insertion of any device
which has a maximum operating voltage below that high
voltage may cause damage to the device plugged in.
2.When the power meter is monitoring the voltage &
current on the two ports, DO NOT plug any device into the
other ports, this will cause damage (Especially when the
device being monitored required a high voltage) to the
devices.
The author is not responsible for any result of a faulty
operation.
Home Screen Dynamic display curve
Screen sleep
Warning
-1- -2-
-3- -4-
Press “R/+” to increase FPS volume
Press “L/-” to decrese FPS volume
PC
Press
Press
Press Twice
Back
Press “R/+” and hold 3S Show the current Date, time, and temp
Press “L/ - ” and hold 3S Test Cable Resistance
Menu
Clear
Group
FastCharge
Waiting 3S
L
PC
Applicatione Main Control IC：STM32 F072
Display screen：TFT 1.44" 128*128
Voltage Current Range ：4-26V(0-26V PC) 0-6A
Voltage Current Resolution：0.0001V 0.0001A
Voltage Current Accuracy：0.1%+2d 0.1%+2d
Quiescent Current：0.4mA
QC2.0 QC3.0 Trigger PD Analysis/Monitor：Support
PC Tool suite：Support
USB Firmware Update：Support
Technical Specifications
-5- -6-
-7- -8-
Press “Enter”
and hold 3S
Press “R/+” and hold Switch direction of the screen
Offline
Recording
R/+
Press Twice
Back
Press “Enter”
The device can store at most 4 curves
each curve can store data of 3750 points.
Connect the device to the PC with a micro USB cable.(5V PC only)
For the first time, you should install the driver. Click the "Install Driver"
menustrip to run the driver installer.
Electronic Load Parameters:
Applied voltage range: DC 3.7V-13V
Adjustable current range: 0.15A-3.00A
Electricity discharging: continuous 15W
Temperature control: about 40 ℃(Caution High Temperature)
Get Manual,Firmware,PC APPfrom www.avhzy.com Support.
Other common instructions
Get PC APPfrom www.avhzy.com Support.
Press Twice
Back
Caution the voltage it
connected by in case of
damage
If the screen didn't light up,
flip the cable on any side
of the meter.
Other manuals for CT-2
1
Other AVHzY Measuring Instrument manuals
