Assa Abloy Yale 446F User manual

For use with Yale Exit Devices (Wood and Metal Doors)

448F & 449F

Non-Handed

441F & 446F

Non-Handed

440F Series

Exit Device Trim

Installation Instructions

TRIM

441F

446F

448F

449F

FUNCTION

F03 (NL)

F08

Passage

F02

Sectional Lever Trim

LEVER TYPE

Key In

Lever

Plain

Lever

DESCRIPTION

Key retract bolt(s)

Key locks/unlocks lever

Lever retracts bolt(s)

Dummy trim*

Dummy trim

REMARKS

Free wheeling lever

Lever always active

Free wheeling lever

Rigid lever

*Field Prep: Cut tailpiece off, not to engage the device.

All dimensions are in inches (mm) unless otherwise noted.

Attention Installer

Any retrofit or other field modification to a fire rated opening can

potentially impact the fire rating of the opening, and Yale Locks &

Hardware makes no representations or warranties concerning what

such impact may be in any specific situation. When retrofitting any

portion of an existing fire rated opening, or specifying and installing

a new fire-rated opening, please consult with a code specialist or

local code official (Authority Having Jurisdiction) to ensure

compliance with all applicable codes and ratings.

PPHMS

PTHMS

PHILLIPS PAN HEAD MACHINE SCREW

PHILLIPS TRUSS HEAD MACHINE SCREW

FASTENER DESCRIPTION

ABBREVIATION

An ASSA ABLOY Group brand

80-8470-0441-000 (11-18)

Figure 2: Tailpiece Sizing

Figure 1

Trim

Mounting

Surface

NOTE: Measure from device mounting

surface (door face or shim surface)

Cut Line

Hold 5/16

(8)

Trim

Tailpiece

Device

Mounting

Surface

(See Note)

Device is bolted

to trim using

holes “A” (closest

to door lock edge)

(2) Screws and

washers bolt trim

to door using

holes “B”

Tailpiece (T)

engages with

cross hole of

cam slot.

Cut per Fig. 2

LHR Door

Shown

1. Check box contents.

2. After marking door inside face for device location (Device

Instructions), transfer “Vertical Reference Centerline” from inside to

outside door face. Follow steps 2a and 2b, at right.

3. Transfer “Horizontal Reference Centerline” from inside to outside door

face.

4. Orient and align trim template, attach with tape to outside door face.

5. Spot holes and prepare door for trim.

6. Adjust trim for door thickness (as reqd).

7. Mount trim to door thru holes “B” with (2) #10-32 x 2"PTHMS supplied

as shown in Fig. 1.

Note: If installing dummy trim, continue as shown in device

instructions.

8. If required, cut trim tailpiece as shown in Fig. 2. Seat device so that

the trim tailpiece penetrates cam slot as shown in Fig. 1. Thru mount

device to trim thru holes “A” as shown in Fig. 1 using 1/4-20 PPHMS

supplied with device.

9. Continue as shown in device instructions.

Installation Instructions

INSTALLATION INSTRUCTIONS - RHR Shown*

* - Trim Assembly shipped non-handed, rotate assembly

180° for use with LHR application.

(2) #10-32 x 2"

Truss Head

Machine Screws

Tailpiece

For thick door applications use

60-1500-1819-059 (Ordered Separately)

secure with pin

An ASSA ABLOY Group brand

80-8470-0441-000 (11-18)

WARNING

This product can expose

you to lead which is

known to the state of

California to cause cancer

and birth defects or other

reproductive harm. For

more information go to

www.P65warnings.ca.gov.

08/2018

Slide plate to

disengage

2-1/4" Door

2" Door

1-3/4" Door

Figure 3b. Interchangeable Core Cylinders

Trim levers are specific for the cylinder core used.

Levers are not removable. To remove and install the

cylinder use the control key supplied with the cylinder.

LFIC, lever for 6-pin cores, 1210 and 5210.

SFIC, lever for 6- or 7-pin cores

Figure 3a. Lever Handle Removable

1. Insert Key & rotate clockwise 45°

2. Depress retainer with tool supplied.

3. Slide Lever off trim.

(Reverse steps to re-assemble.)

Lever

Removable

Tool

Standard Cylinder

Each 441F and 446F Standard Trim is supplied with

one Yale® 1802 6-pin random keyed cylinder, and (2) keys.

This lever can fit any Yale 6-pin (1802, 5802) cylinder.

To re-key or exchange any of these cylinders, follow steps 3a or 3b shown below.

Adjust lock for door thickness

(If necessary)

(Lock is packaged preadjusted for 1-3/4" (44mm) thick doors.)

To adjust for a thicker door.

A. Remove (2) screws from outside rose plate.

B. Slide outside rose away from lock body.

C. Adjust rose plate to desired door thickness per illustration below.

D. Fasten outside rose to lock body with (2) screws.

An ASSA ABLOY Group brand

80-8470-0441-000 (11-18)

VERTICAL

REFERENCE

L(Device and Trim)

HORIZONTAL

REFERENCE

Outside Door

Face Trim

Template

2-1/8 (54) Dia

x 7/8 (22) Deep

1-3/8

(35)

1-3/8

(35)

“C”

(2) 3/8 (9.5) Dia

x 1/2 (13) Deep

7/32 (5.5) Dia Thru

CAUTION: Office copiers and facsimile mach-

ines may change the size of a drawing and make

the template inaccurate to use as a door marker.

If this is not the original template packed with the

trim, use only the holes on the door (do not use

template as a door marker).

441F, 446F,

448F, 449F

For Holes Marked “X”

See Below

RHR TRIM

LHR TRIM

Yale® registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their

respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication.

Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.

is a

Product Support Tel 800. • www.yalelocks.com438.1951

Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.

An ASSA ABLOY Group brand

80-8470-0441-000 (11-18)

This manual suits for next models

Table of contents

Other Assa Abloy Door Lock manuals

Assa Abloy

Assa Abloy Access 3 User manual

Assa Abloy

Assa Abloy Lockwood Onyx 9A1A2/5PBLK User manual

Assa Abloy

Assa Abloy EMTEK LISCIO Troubleshooting guide

Assa Abloy

Assa Abloy 179B S4 User guide

Assa Abloy

Assa Abloy Sargent PE8400 Series User manual

Assa Abloy

Assa Abloy ZI IKON eCLIQ N109 User manual

Assa Abloy

Assa Abloy Sargent PR100 User manual

Assa Abloy

Assa Abloy shine User manual

Assa Abloy

Assa Abloy Yale YMI70A User manual

Assa Abloy

Assa Abloy RIXSON 93 User manual

Assa Abloy

Assa Abloy Corbin Russwin CLX3300 User manual

Assa Abloy

Assa Abloy 179E-2 User guide

Assa Abloy

Assa Abloy h.e.s. 9200 Series Manual

Assa Abloy

Assa Abloy Securitron Magnalock M670BD Series User manual

Assa Abloy

Assa Abloy effeff 843 User manual

Assa Abloy

Assa Abloy Securitron UnLatch Manual

Assa Abloy

Assa Abloy 7003 User manual

Assa Abloy

Assa Abloy 1264 User manual

Assa Abloy

Assa Abloy 1489 User manual

Assa Abloy

Assa Abloy effef 118 User manual

Assa Abloy

Assa Abloy Access 3 User manual

Assa Abloy

Assa Abloy MSL mFlipLock basis User manual

Assa Abloy

Assa Abloy 8654 User manual

Assa Abloy

Assa Abloy PADDE Series User manual

Popular Door Lock manuals by other brands

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions

Saflok

Saflok Quantum ädesē RFID installation instructions