Assa Abloy 7003 User manual

Product Layout:

User Manual

7003 Smart Door Lock

Panel and lock body installation steps.

1. Adjust latch direction according to door opening side.

2. Lock body: Put lock body into hole made then tighten screw.

3. Put M 5 stud on front rose and use screwdriver tight it, data line and spindle go

thought lock body together properly and data line go thought back handle, then tight

M4*35 screws on back rose, last test lock body latch and bolt should work well.

4.Connect front data line onto port at back handle and put 4*AAA battery into handle,

after heard: “Du” means connected, last put battery cover on handle properly.

5. Put M 5 stud on front rose for cylinder then hole made for it and back rose should be

connect with right position then tight M4*35 screws. Cylinder go thought rose and

screw in cylinder screw on liner.

6.Install buckle plate and buckle box on frame, make sure bolt and latch work smoothly.

7. Try handle & lock body see if work smoothly otherwise check again until work well.

Change battery by using A screwdriver from back handle

Front rose back rose

Function button

Please keep internal/external panel clean before installation.

Lock body change direction

Handle change direction

latch

Latch adjust parts Commutate

lock body

liner

Pull spindle out and turn 180 degree

Inside Handle Outside Handle

Rose

1.When installing lock

sure batch bolt should

always on top and dead

bolt at.

2.Please adjust latch bolt

slope when necessary.

a.Latch bolt commutator

follow arrow direction that

push latch bolt in adjust it

as required.

b.Turn latch bolt 180° and

take it out from liner after

adjusting.

Product Features:

● Multiple way to access: Fingerprint & Mechanical Key.

● Fingerprint: Advanced semiconductor sensors with 360° scanner.

● Lock can have fingerprint access users capacity: Fingerprint ( 2 master users & 28 normal

users).

● Reminder: Unlock, low battery and up to lock voice.

● External power supply: Can use power bank with 5V for emergency power supply.

Operations:

1. Reset factory default: Press function button at back of lock for 5 seconds, voice will prompt

reset succeed.

2. Register master/user:

2.1 Initial mode: Short press function button at back handle 1 time voice promote add master.

2.2 Once master user is added: Short press function button at back handle 1 time, input any

registered master at this time can add 1 more master( if only 1 master registered) or common

user.

3. Delete registered fingerprint:

3.1 Short press function button at back handle 3 time, confirm any registered master and input

master or user need to be deleted, until heard succeed.

Other function:

1. Internal Forced Lock: Short press function button 2 times, voice promote locking,

at this time only master and key can unlock

2. On/Off unlocking mode:

2.1 After master open and pres function button at back 1 time within 6 second,unlocking

mode on.

2.2 By using mater open 1 time unlocking mode will off.

3. Turn off voice: Short press function button at back for 4 times, voice promote will be off.

4. Electricity quantity Checking and series checking: Short press function button at back for

5 times, voice will promote ( low / medium/high battery) and series no.

How to take battery cover out:

1. After installation of lock please reset lock to factory default mode.

2. After factory default mode make sure to register 1 master user.

3. The handle is the key part for opening and closing door, and its flexibility ratio directly

influences the usage of door lock, hence, don't hang articles on handle.

4. Gently press fingerprint on the fingerprint sensor for registration of fingerprint.

Please don't press with great force to prevent scratching the fingerprint sensor.

5. This lock uses 4 AAA high-energy alkaline batteries (1.5V). When it prompts "the

voltage is low, please replace battery" for the first time, the door can be opened for

about 100 times as per different battery capacities; At this time, the battery should be

replaced promptly to avoid inconvenience due to the exhausted battery.

Remark:

1. All fingerprint need to scan 3 times for addition.

2. After successful registration press function button at back to exit.

3. When Deleting fingerprint, one master user in fingerprint has to be left.

Remark:

4 5

When change battery use slotted screwdriver push in

and up towards door direction.

Other Assa Abloy Door Lock manuals

Assa Abloy

Assa Abloy Lockwood 8816 User manual

Assa Abloy

Assa Abloy Lockwood 1220 Series User manual

Assa Abloy

Assa Abloy HES Aperio ES100-15 Manual

Assa Abloy

Assa Abloy Sargent 52-4424 Guide

Assa Abloy

Assa Abloy EL460 User manual

Assa Abloy

Assa Abloy SARGENT FM7100 Series User manual

Assa Abloy

Assa Abloy DC423.2 User manual

Assa Abloy

Assa Abloy Sargent IN220 User manual

Assa Abloy

Assa Abloy MSL mFlipLock basis User manual

Assa Abloy

Assa Abloy Securitron DSB Series User manual

Assa Abloy

Assa Abloy Sargent PE8300 Series User manual

Assa Abloy

Assa Abloy 179A User guide

Assa Abloy

Assa Abloy ESA500 Installation manual

Assa Abloy

Assa Abloy Corbin Russwin ED2400 Series User manual

Assa Abloy

Assa Abloy Sargent Profile G1 Series User manual

Assa Abloy

Assa Abloy IP2326N Operating instructions

Assa Abloy

Assa Abloy SARGENT IN Series User manual

Assa Abloy

Assa Abloy CYE345 User manual

Assa Abloy

Assa Abloy ENTR User manual

Assa Abloy

Assa Abloy Sargent PR100 User manual

Assa Abloy

Assa Abloy Yale YD-01-CON-NOMOD User manual

Assa Abloy

Assa Abloy Sargent 8200 Series User manual

Assa Abloy

Assa Abloy Yale nexTouch NTB610 Technical specifications

Assa Abloy

Assa Abloy Yale Doorman User manual

Popular Door Lock manuals by other brands

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions

Saflok

Saflok Quantum ädesē RFID installation instructions