Assa Abloy EMTEK LISCIO Troubleshooting guide

ASSA ABLOY, the global leader in door opening solutions

Installation Guide & User Manual

Electronic Keypad Lever Lockset

with Bluetooth Programming

ITEM NO. DESCRIPTION QTY.

1Key 2

2Outside Trim Plate Assembly 1

3Latch for 2⁄” or 2¾” Backset 1

4Inside Trim Plate Assembly 1

4a Inside Chassis 1

4b Inside Trim Plate 1

4c #8-32 x ⁄" Flat Head Machine Screw 2

4d 9V Alkaline Battery 1

5#8-32 x 1½" Flat Head Machine Screw 2

6#8 x ¾" Wood Screw 5

7Strike Plate 1

8Plastic Extender 1

What’s in the Box

Confirm Handing

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE

Hinge is on the left.

Door is Left Hand (LH)

Hinge is on the right.

Door is Right Hand (RH)

Hinge is on the right.

Door is Right Hand (RH)

Hinge is on the left.

Door is Left Hand (LH)

In-Swing Doors Out-Swing Doors

outsideoutside

Preparation

Fasten Strike Plate using

two #8 x ¾”Wood Screws

(item #6).

2 ⁄”or 2 ¾”

Backset

2 ⁄”Dia

Bore

⁄”Deep

2 ¼”

1“ 1”Diameter

Edge Bore

Door Prep

B D

Door Jamb Prep

1”Deep,

1”Diameter

Edge Bore

⁄”Deep

1-1/8"

2-3/4"

2 ¼”

1 ½”

Install Strike Plate

Use a Phillips head screwdriver to remove

screws (item #4c) shown below and detach

Inside Trim Plate from the Inside Chassis.

Fasten Latch using two

#8 x ¾” Wood Screws

(item #6).

Remove Screws from Inside Trim Plate

How to Install

Remove inside chassis from

trim plate before installing

the outside trim. Thumbturn

must be in neutral position.

Install Latch

LH RH

See Page 3 for Handing

Information.

TOP

Once positioned,

outside trim plate

assembly requires

support.

This side

on top.

Fit Plastic Extender

through latch.

Feed wire harness

through the bore hole.

Install Outside Trim Plate Assembly

While holding Outside Trim

Plate Assembly, Press the Plastic

Extender (A) into end of Spindle

Shaft (B). The Shaft is properly

aligned when the marking

‘TOP’ can be seen from

an overhead view.

Position the Outside Trim Plate Assembly through the bore hole.

With the Outside Trim Plate Assembly ush to the door, REMOVE the Plastic Extender.

STEP 2

STEP 3

STEP 1

Install Inside Chassis

Cam link must remain

in the correct position

during installation.

Conrm the position of Cam Link.

For Left Hand Locks:

Turn to left position.

For Right Hand Locks:

Turn to right position.

Feed the Wire Harness through Inside Chassis. 4

STEP 1

STEP 2

Check alignment before

fully tightening screws.

Connect Wire Harness (A) and tuck Connectors as shown (B).

A B

Install Battery.

For optimal performance, always

use a good quality battery.

9V Battery

Fasten Inside Chassis using two

#8-32 x 1½”Flat Head Machine

Screw (item #5).

STEP 3

STEP 4

STEP 5

Optional - An additional #8

wood screw (provided) can

be installed to prevent the

interior trim from rotating

Inside

*Neutral position is required for installation and removal of the Inside Trim Plate Assembly.

Correct position for installation.

Thumbcam must be positioned

as shown (Neutral Position)*

User codes are located

on the inside trim plate

& back cover page.

Fasten Inside Trim Plate using two#8-32 x ⁄”

Flat Head Machine Screws (item #4c).

Install Inside Trim Plate

Screws (item #4c)

Using the Lock

Once installed on door with the battery connected - your lock is ready for use.

Factory Default Setting

User & Master Codes are labeled on the inside trim plate and back cover page.

Entering User Codes

• Entering a correct, active user code (green LED x1 & beep x1) - unlocks

• Entering an incorrect or inactive code (red LED x2 & beep x2) - remains locked

• Three incorrect entries will result in lockout, signaled by 3 red LED ashes

& 3 short beeps, lockout lasts for 30 seconds.

To Restart Code Entry

Press and hold #1 button for three seconds (this works in entry or programming mode).

Key Access

Lock may also be unlocked and locked via keyed cylinder, each lock comes with two keys.

Passage & Privacy Mode

Use inside thumbturn.

Lever buttons

Keyed Cylinder

Thumbturn

Enable ON

Thumbturn

Enable OFF

Green

Amber

Lock access is regulated. A correct, active user code is required for

access. (Privacy Mode)

Lock access in NOT regulated. Always Unlocked (Passage Mode)

Thumbturn

Setting Setting Description Thumbturn Position LED Feedback

Your Lock is Ready to Use

How to Use

Getting Started

Device App

App is free and available at App Store ( devices) or Play Store ( devices).

From devices (iPhone 4S, 5, 5S & 5C; iPad 3rd

generation and later running iOS 8 and later)

1. Go to App Store, select Search, enter “Emtek”,

select “Emtek Liscio Bluetooth”, select download

icon, when ready select Open. If upon opening

app you receive a screen that advises you that

your device is “Unsupported” you will not be able

to run app on this device.

From devices (OS 4.3 and later)

1. Go to Play Store, select Search icon, enter

“Emtek”, select “Emtek Liscio Bluetooth” app,

select Install, select Accept, when ready select

Open. If app does not appear then your device

is running OS prior to 4.3.

Once App is opened you will be on the

Welcome screen

1. Selecting Start you will move through the

setup wizard, lock will need to be nearby

for this.

2. Select Videos, Quick Reference, About or

Show Phone Info as needed

3. If you call Emtek for customer service please

have the information listed in the Show Phone

Info available.

Other manuals for EMTEK LISCIO

Table of contents

Languages:

Other Assa Abloy Door Lock manuals

Assa Abloy

Assa Abloy 1489 User manual

Assa Abloy

Assa Abloy SARGENT Profile Series User manual

Assa Abloy

Assa Abloy Arrow Revolution U4A-YRHCPZW0 Technical specifications

Assa Abloy

Assa Abloy SARGENT 2828 Series User manual

Assa Abloy

Assa Abloy Corbin Russwin HP3000 Series User manual

Assa Abloy

Assa Abloy shine User manual

Assa Abloy

Assa Abloy Sargent IN220 User manual

Assa Abloy

Assa Abloy Yale YD-01-CON-NOMOD-PB User manual

Assa Abloy

Assa Abloy SARGENT 5300 Series User manual

Assa Abloy

Assa Abloy SARGENT IN120 Wi-Fi Series User manual

Assa Abloy

Assa Abloy 81 C Series User manual

Assa Abloy

Assa Abloy mFlipLock standard User manual

Assa Abloy

Assa Abloy Code Handle Manual

Assa Abloy

Assa Abloy Sargent KP Series Installation manual

Assa Abloy

Assa Abloy DC423.2 User manual

Assa Abloy

Assa Abloy Corbin Russwin ED5800 Series User manual

Assa Abloy

Assa Abloy R10 User manual

Assa Abloy

Assa Abloy ES8100 Assembly instructions

Assa Abloy

Assa Abloy Yale nexTouch NTB610 Technical specifications

Assa Abloy

Assa Abloy VERSO CLIQ V532 User manual

Assa Abloy

Assa Abloy ASSA 88x Series User manual

Assa Abloy

Assa Abloy Corbin Russwin SE LP10 CL3360 User manual

Assa Abloy

Assa Abloy effef 118 User manual

Assa Abloy

Assa Abloy SARGENT 480 Series User manual

Popular Door Lock manuals by other brands

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions

Saflok

Saflok Quantum ädesē RFID installation instructions