Apera Instruments LabSen 753 User manual

LabSen 753 Stainless Steel Sheath Spear pH Electrode

User Manual

LabSen electrochemical sensors are premium pH electrode with manufacturing technology and key

components imported from Switzerland. LabSen753 spear pH electrode adopts spear membrane,

which can easily pierce into solid or semi-solid medium. This probe is suitable for pH measuring of

cheese, flour products, meat and fruits.

This probe has following features:

Adopts food grade stainless steel sheath, offers strong protection, comply with food hygiene

requirements, suitable for food pH testing.

Blue gel inner solution, does not flow and will not cause bubble.

Maintenance-free polymer electrolyte, non-diaphragm structure.

Long life reference system, has better stability and service life.

1 Technical Data

Measuring Range

(0 ~ 14) pH

Electrolyte

Polymer

Temperature Range

(0 ~ 80)°C

Soaking Solution

3M KCl

Shaft Material

Stainless Steel

Electrode

Dimension

Electrode (Ø12×115) mm

Measuring Tip (Ø6×50) mm

Membrane Shape

Tapered

Reference

Long Life

Connector

BNC/RCA

Junction

Ceramic+Single Pore

Cable

Ø5×1m

2 Usage and Maintenance

2.1 Connect BNC & RCA plug to the input on the pH meter.

2.2 When measuring, please unscrew the bottle cap, pull out the electrode and rinse it with

deionized water. After using, please put the electrode back into the bottle and screw tight the

cap.

2.3 The electrode must be soaked in 3M KCl solution for storage. Because after long time

exposure in air, Polymer electrolyte will cause shrinkage.

2.4 The electrode’s measuring tip should be soaked in the soaking bottle containing certain

amount of 3M KCl soaking solution to keep the membrane hydrated and junction unblocked.

Before pulling out or putting back the electrode,

make sure to fully loosen the blue cap on the

storage sleeve so that the electrode can move in

and out smoothly.

Clean the bottle and replace the storage solution if the storage solution gets turbid and

mildewed. The electrode should never be sinked in pure water or buffer solution for long.

2.5 The connector of the electrode should keep clean and dry. If being contaminated, please clean

it with medical cotton and absolute alcohol and blow dry to prevent the short circuit of the

electrode and slow reaction of electrode.

2.6 Spear pH Electrode is suitable for measure wet solid or semi-solid medium. Please forcibly

even when piercing, to prevent damage of the electrode. In case the sample medium is too

hard (such as meat and fruit); please cut a small hole before piercing the electrode into it.

2.7 After 1-year of use, we recommend replacing the electrode to ensure the best accuracy.

3 Warranty

We warrant this electrode free from defects in material and workmanship and agrees to repair or

replace free of charge, at option of APERA INSTRUMENTS any malfunctioned or damaged product

attributable to responsibility of APERA INSTRUMENTS for a period of six months. Warranty period

is the time limit to provide free service for the products purchased by customers, not the service life

of the tester or electrodes.

This limited warranty does not cover any damages due to:

transportation; storage; improper use; failure to follow the product instructions or to perform any

preventive maintenance; modifications; combination or use with any products, materials, processes,

systems or other matter not provided or authorized in writing by us; unauthorized repair; normal wear

and tear; or external causes such as accidents, abuse, or other actions or events beyond our

reasonable control.

APERA INSTRUMENTS (Europe) GmbH

Address: Wilhelm-Muthmann-Str.15,

42329 Wuppertal, Germany

Phone: +49 202 51988998

Website: www.aperainst.de

Email: info@aperainst.de

Table of contents

Other Apera Instruments Measuring Instrument manuals

Apera Instruments

Apera Instruments LabSen 861 User manual

Apera Instruments

Apera Instruments EC700 User manual

Apera Instruments

Apera Instruments SX811-BS User manual

Apera Instruments

Apera Instruments DO8500 User manual

Apera Instruments

Apera Instruments 201-C User manual

Apera Instruments

Apera Instruments YD300 Instruction manual

Apera Instruments

Apera Instruments LabSen 801 User manual

Apera Instruments

Apera Instruments DO8500 User manual

Apera Instruments

Apera Instruments EC400 User manual

Apera Instruments

Apera Instruments TN400 User manual

Apera Instruments

Apera Instruments LabSen 851-H User manual

Apera Instruments

Apera Instruments Premium Series User manual

Apera Instruments

Apera Instruments SX811-PW User manual

Apera Instruments

Apera Instruments SX811-SS User manual

Apera Instruments

Apera Instruments LabSen 753 User manual

Apera Instruments

Apera Instruments 9500 Premium Series User manual

Apera Instruments

Apera Instruments TN420 User manual

Apera Instruments

Apera Instruments SX751 User manual

Apera Instruments

Apera Instruments LabSen 763 User manual

Apera Instruments

Apera Instruments 9500 Premium Series User manual

Apera Instruments

Apera Instruments SX725 User manual

Apera Instruments

Apera Instruments PH60-WW User manual

Apera Instruments

Apera Instruments LabSen 751 User manual

Apera Instruments

Apera Instruments DO803 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual