Alliance Laundry Systems CS018 User manual

www.alliancelaundry.com

Installation

Washer-Extractors

Cabinet Freestanding

Refer to for Page 5 Model Identification

Part No. D1343ENR3

November 2012

Original Instructions

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

CFD

CFD644N

means without the expressed written consent of the publisher.

D1343 1

Table of

Contents

Safety Information.............................................................................. 2

Explanation of Safety Messages........................................................... 2

Important Safety Instructions ............................................................... 2

Safety Decals ........................................................................................ 4

Introduction......................................................................................... 5

Model Identification ............................................................................. 5

Nameplate Location.............................................................................. 6

Replacement Parts ................................................................................ 6

Customer Service.................................................................................. 6

Specifications and Dimensions........................................................... 7

Installation........................................................................................... 15

Dimensional Clearances................................................................... 15

Machine Foundation ........................................................................ 16

Mechanical Installation......................................................................... 17

Frame Dimensions and Mounting Bolt Location

For 12 lb. (60 l ), 14 lb. (65 l),

18 lb. (75 l) and 25 lb. (100 l) Capacity Models ............................ 17

Frame Dimensions and Mounting Bolt Location

For 30 lb. (135 l) and 35 lb. (165 l) Capacity Models.................... 18

Frame Dimensions and Mounting Bolt Location

For 55 lb. (235 l) and 75 lb. (305 l) Capacity Models.................... 19

Mounting Bolt Installation (If Required).............................................. 20

Removing the Transport Brackets ........................................................ 21

Drain Connection.................................................................................. 22

Water Connection ................................................................................. 24

Electrical Installation ............................................................................ 25

Electrical Connection............................................................................ 28

Remote Liquid Supply Connection ...................................................... 29

Chemical Injection Supply System.................................................. 29

Steam Requirements (Steam Heat Option Only).................................. 30

Supply Programming Table ............................................................. 31

Supply Relay Configuration (No Wiring)........................................ 31

Primary 220 Volt Remote Liquid Supply Connection..................... 31

Out-of-Balance Switch ......................................................................... 33

Automatic Lubricator............................................................................ 33

Control Function Test ........................................................................... 34

Disposal of Unit ................................................................................... 35

2D1343

Safety Information

Explanation of Safety Messages

Precautionary statements (“DANGER”,

“WARNING”, and “CAUTION”), followed by

specific instructions, are found in this manual and on

machine decals. These precautions are intended for the

personal safety of the operator, user, servicer, and

those maintaining the machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

NOTE: The word “NOTE” is used to communicate

installation, operation, maintenance or servicing

information that is important but not hazard

related.

Important Safety Instructions

1. Read all instructions before using the washer.

2. Install the washer according the

INSTALLATION instructions. Refer to the

EARTHING (grounding) instructions in the

INSTALLATION manual for the proper earthing

(grounding) of the washer. All connections for

water, drain, electrical power and earthing

(grounding) must comply with local codes and be

made by licensed personnel when required. It is

recommended that the machine be installed by

qualified technicians.

3. Do not install or store the washer where it will be

exposed to water and/or weather.

4. To prevent fire and explosion, keep the area

around machine free from flammable and

combustible products. Do not add the following

substances or textiles containing traces of the

following substances to the wash water: gasoline,

kerosene, waxes, cooking oils, vegetable oils,

machine oils, dry-cleaning solvents, flammable

chemicals, thinners, or other flammable or

explosive substances. These substances give off

vapors that could ignite, explode or cause the

fabric to catch fire by itself.

5. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a

washing machine or combination washer-dryer,

turn on all hot water faucets and let the water

flow from each for several minutes. This will

release any accumulated hydrogen gas. The gas

is flammable, do not smoke or use an open flame

during this time.

6. To reduce the risk of an electric shock or fire, DO

NOT use an extension cord or an adapter to

connect the washer to the electrical power

source.

DANGER indicates the presence of a

hazard that will cause severe personal

injury, death, or substantial property

damage if the danger is ignored.

DANGER

WARNING indicates the presence of a

hazard that can cause severe personal

injury, death, or substantial property

damage if the warning is ignored.

WARNING

CAUTION indicates the presence of a

hazard that will or can cause minor

personal injury or property damage if the

caution is ignored.

CAUTION

To reduce the risk of fire, electric shock,

serious injury or death to persons when

using your washer, follow these basic

precautions:

W023

WARNING

Safety Information

D1343

7. Do not allow children to play on or in the washer.

Close supervision of children is necessary when

the washer is used near children. This appliance

is not intended for use by young children or

infirm persons without supervision. Young

children should be supervised to ensure that they

do not play with the appliance. This is a safety

rule for all appliances.

8. DO NOT reach and/or climb into the tub or onto

the washer, ESPECIALLY if the wash drum is

moving. This is an imminently hazardous

situation that, if not avoided, will cause severe

personal injury or death.

9. Never operate the washer with any guards, panels

and/or parts removed or broken. DO NOT bypass

any safety devices or tamper with the controls.

10. Use washer only for its intended purpose,

washing textiles. Never wash machine parts or

automotive parts in the machine. This could

result in serious damage to the basket or tub.

11. Use only low-sudsing, no-foaming types of

commercial detergent. Be aware that hazardous

chemicals may be present. Wear hand and eye

protection when adding detergents and

chemicals. Always read and follow

manufacturer’s instructions on packages of

laundry and cleaning aids. Heed all warnings or

precautions. To reduce the risk of poisoning or

chemical burns, keep them out of the reach of

children at all times (preferably in a locked

cabinet).

12. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

13. Always follow the fabric care instructions

supplied by the textile manufacturer.

14. Loading door MUST BE CLOSED any time the

washer is to fill, tumble or spin. DO NOT bypass

the loading door switch by permitting the washer

to operate with the loading door open. Do not

attempt to open the door until the washer has

drained and all moving parts have stopped.

15. Be aware that hot water is used to flush the

supply dispenser. Avoid opening the dispenser lid

while the machine is running.

16. Do not attach anything to the supply dispenser’s

nozzles, if applicable. The air gap must be

maintained.

17. Do not operate the machine without the water

reuse plug or water reuse system in place, if

applicable.

18. Be sure water connections have a shut-off valve

and that fill hose connections are tight. CLOSE

the shut-off valves at the end of each wash day.

19. Keep washer in good condition. Bumping or

dropping the washer can damage safety features.

If this occurs, have washer checked by a

qualified service person.

20. DANGER: Before inspecting or servicing

machine, power supply must be turned OFF. The

servicer needs to wait for at least 10 minutes after

turning the power OFF and needs to check for

residual voltage with a voltage meter. The

inverter capacitor or EMC filter remains charged

with high voltage for some time after powering

OFF. This is an imminently hazardous situation

that, if not avoided, will cause severe personal

injury or death.

21. Do not repair or replace any part of the washer, or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that the user understands and has the

skills to carry out. ALWAYS disconnect the

washer from electrical, power and water supplies

before attempting any service.

22. Disconnect the power cord by grasping the plug,

not the cord. Replace worn power cords and/or

loose plugs. If the supply cord is damaged, it

must be replaced by a special cord or assembly

available from the service agent.

23. Before the washer is removed from service or

discarded, remove the door to the washing

compartment.

24. Failure to install, maintain, and/or operate this

washer according to the manufacturer’s

instructions may result in conditions which can

produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT

SAFETY INSTRUCTIONS appearing in this

manual are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining, or operating the washer.

Always contact your dealer, distributor, service agent

or the manufacturer on any problems or conditions you

do not understand.

Safety Information

D1343

IMPORTANT: Ensure that the recommended

clearances for inspection and maintenance are

provided. Never allow the inspection and

maintenance space to be blocked.

Safety Decals

Safety decals appear at crucial locations on the

machine. Failure to maintain legible safety decals

could result in injury to the operator or service

technician.

Use manufacturer-authorized spare parts to avoid

safety hazards.

This machine must be installed, adjusted,

and serviced by qualified electrical

maintenance personnel familiar with the

construction and operation of this type of

machinery. They must also be familiar

with the potential hazards involved.

Failure to observe this warning may result

in personal injury and/or equipment

damage, and may void the warranty.

SW004

WARNING

Never touch internal or external steam

pipes, connections, or components.

These surfaces can be extremely hot and

will cause severe burns. The steam must

be turned off and the pipe, connections,

and components allowed to cool before

the pipe can be touched.

SW014

WARNING

D1343

Introduction

Model Identification

Information in this manual is applicable to these

models:

CS018

CS025

CS035

CS055

CS075

CS100

CS135

CS165

CXG060

CXG065

CXG075

CXG100

CXG135

CXG165

CXG235

CXG305

CXN060

CXN065

CXN075

CXN100

CXN135

CXN165

CXN235

CXN305

CXU060

CXU065

CXU075

CXU100

CXU135

CXU165

CXU235

CXU305

CXW060

CXW065

CXW075

CXW100

CXW135

CXW165

CXW235

CXW305

CXZ060

CXZ065

CXZ075

CXZ100

CXZ135

CXZ165

CXZ235

CXZ305

DXU060X

DXU065X

DXU075X

DXU100X

DXU135X

DXU165X

DXU235X

DXU305X

HD60

HD65

HD75

HD100

HD135

HD165

HD235

HD305

HX18

HX25

HX35

HX55

HX75

HXN075P

HXN100P

HXN165P

HXN235P

HXN305P

IS012

IS018

IS025

IS035

IS055

IS075

IS100

IS135

IS165

IXG060

IXG065

IXG075

IXG100

IXG135

IXG165

IXG235

IXG305

IXN060

IXN065

IXN075

IXN100

IXN135

IXN165

IXN235

IXN305

IXU060

IXU065

IXU075

IXU100

IXU135

IXU165

IXU235

IXU305

IXW060

IXW065

IXW075

IXW100

IXW135

IXW165

IXW235

IXW305

IXZ060

IXZ065

IXZ075

IXZ100

IXZ135

IXZ165

IXZ235

IXZ305

JXW060C

JXW060X

JXW060Y

JXW060Z

JXW065C

JXW065X

JXW065Y

JXW065Z

JXW075C

JXW075X

JXW075Y

JXW075Z

JXW100C

JXW100X

JXW100Y

JXW100Z

JXW135C

JXW135X

JXW135Y

JXW135Z

JXW165C

JXW165X

JXW165Y

JXW165Z

JXW235C

JXW235X

JXW235Y

JXW235Z

JXW305C

JXW305X

JXW305Y

JXW305Z

PXU060Y

PXU065Y

PXU075Y

PXU100Y

PXU135Y

PXU165Y

PXU235Y

PXU305Y

SX18

SX25

SX35

SX55

SX75

SXN075P

SXN100P

SXN165P

SXN235P

SXN305P

UX18

UX25

UX35

UX55

UX75

UXN075P

UXN100P

UXN165P

UXN235P

UXN305P

WXU060C

WXU065C

WXU075C

WXU100C

WXU135C

WXU165C

WXU235C

WXU305C

Introduction

D1343

Nameplate Location

The nameplate is located at the rear of the machine.

Always provide the machine’s serial number and

model number when ordering parts or when seeking

technical assistance. Refer to Figure 1.

Figure 1

Replacement Parts

If literature or replacement parts are required, contact

the source from which the machine was purchased or

contact Alliance Laundry Systems at

+1 (920) 748-3950 for the name and address of the

nearest authorized parts distributor.

Customer Service

For technical assistance, contact your local distributor

or contact:

Alliance Laundry Systems

Shepard Street

P. O . B o x 9 9 0

Ripon, Wisconsin 54971-0990

U.S.A.

www.alliancelaundry.com

Phone: +1 (920) 748-3121

+3256412054

Wevelgem, Belgium

1Nameplate

CFD644N

This manual suits for next models

190

Table of contents

Other Alliance Laundry Systems Washer manuals

Alliance Laundry Systems

Alliance Laundry Systems CHM1772C User manual

Alliance Laundry Systems

Alliance Laundry Systems HC18 Maintenance and service guide

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen AFNE9RSP User manual

Alliance Laundry Systems

Alliance Laundry Systems W446I Guide

Alliance Laundry Systems

Alliance Laundry Systems F232135R12 User manual

Alliance Laundry Systems

Alliance Laundry Systems W001C User manual

Alliance Laundry Systems

Alliance Laundry Systems BWT820*N1102 Programming manual

Alliance Laundry Systems

Alliance Laundry Systems AFBE9BSP303NN29 Operating instructions

Alliance Laundry Systems

Alliance Laundry Systems Frontload Washers User manual

Alliance Laundry Systems

Alliance Laundry Systems 800138R2 Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems HF18VCV User manual

Alliance Laundry Systems

Alliance Laundry Systems UWN045K2M Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems HC18MC2 User manual

Alliance Laundry Systems

Alliance Laundry Systems UW150PV Series Programming manual

Alliance Laundry Systems

Alliance Laundry Systems CP040PMN1 User manual

Alliance Laundry Systems

Alliance Laundry Systems HC18PC2 Troubleshooting guide

Alliance Laundry Systems

Alliance Laundry Systems CHM1772C User manual

Alliance Laundry Systems

Alliance Laundry Systems 802750R2 User manual

Alliance Laundry Systems

Alliance Laundry Systems TR5000WN User manual

Alliance Laundry Systems

Alliance Laundry Systems UW35S2 Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems UWL035K12 Operating instructions

Alliance Laundry Systems

Alliance Laundry Systems AWNE8RSN115FW01 Operating instructions

Alliance Laundry Systems

Alliance Laundry Systems F232139R3 Owner's manual

Alliance Laundry Systems

Alliance Laundry Systems HC18SN2 Manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide