Agilent Technologies ENA Series User manual
Agilent ENA Series Network Analyzers
Mixer Measurement Wizard
Operation Manual
Rev. 01.10
October 2008
1
Notices
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights are reserved.
No part of this document may be photocopied, reproduced, or translated to another language without
the prior written consent of Agilent Technologies.
Microsoft®, MS-DOS®, Windows®, Visual C++®, Visual Basic®, VBA®and Excel®are registered
trademarks of Microsoft Corporation.
Java®is registered trademark of Sum Microsystems Corporation.
© Copyright 2008 Agilent Technologies
Sample Program
The customer shall have the personal, non-transferable rights to use, copy, or modify SAMPLE
PROGRAMS in this manual for the customer’s internal operations. The customer shall use the
SAMPLE PROGRAMS solely and exclusively for their own purpose and shall not license, lease, market,
or distribute the SAMPLE PROGRAMS or modification of any part thereof.
Agilent Technologies shall not be liable for the quality, performance, or behavior of the SAMPLE
PROGRAMS. Agilent Technologies especially disclaims any responsibility for the operation of the
SAMPLE PROGRAMS to be uninterrupted or error-free. The SAMPLE PROGRAMS are provided AS
IS.
AGILENT TECHNOLOGIES DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
Agilent Technologies shall not be liable for any infringement of any patent, trademark, copyright, or
other proprietary right by the SAMPLE PROGRAMS or their use. Agilent Technologies does not
warrant that the SAMPLE PROGRAMS are free from infringements of such rights of third parties.
However, Agilent Technologies will not knowingly infringe or deliver software that infringes the patent,
trademark, copyright, or other proprietary right of a third party.
2
Overview
The ENA Mixer Measurement Wizard VBA macro assists in setting measurement conditions for mixer
tests. To obtain full benefits from this VBA macro, understanding of fundamental network analysis
and scalar and vector mixer calibration are essential. Agilent application notes 1408-1, 1408-2, and
1408-3 offer in-depth information regarding mixer measurements and calibration techniques.
Program Description
Program title Mixer Measurement Wizard
File Name EnaMixerWizard_0110.vba
Revision Rev.01.10
Supported ENA models and firmware
Models Firmware
E5070B/E5071B 2-port/3-port/4-port with opt.008 Rev.6.50 or later
E5071C 2-port/4-port with opt.008 Rev.8.00 or later
Required external instruments
•Power meter and power sensor
•Signal Generator
Measurements supported in the wizard
•Conversion Loss and Group delay
•Conversion Compression
•Return Loss
Calibration types Supported in the wizard
•Power meter calibration (PMC)
•Scalar mixer calibration (SMC)
•Vector Mixer calibration (VMC)
Starting the VBA macro
Step1. Copy VBA file to local drive of ENA.
Step2. Press Macro Setup on the front panel.
Step3. Press Load Project and load VBA file.
Step4. Press Macro Run on the front panel.
3
VBA macro Instruction
Startup Dialogue
[Step1/4] External SG Setup
[Step2/4 Measurement Parameter Setup
VBA program starts with Introduction Dialog.
Press Next button to continue.
Connect ENA USB port to external SG GPIB port
with USB/GPIB interface.
Select the SG model to select appropriate
command.
Select Measurement Type. Refer to “table 1-1
for available measurement and calibration.
4
[Step3/4] Calibration type selection
[Step3/4] (1) Power Meter Calibration
[Step3/4] (2) Scalar Mixer Calibration
Select calibration type. Refer to table1 for
available measurement and calibration.
Power meter calibration technique is perfromed
with this form.
Press “Take Cal Sweep” button under “Power cal”
box to calibrate power level of the ENA.
Then, execute receiver calibration with “Take Cal
Sweep” button in the “Receiver Cal” box.
Scalar mixer calibration technique is performed
with this form.
Press “Take Cal Sweep” button under “Power cal”
box to calibrate power level of the ENA.
Then, execute full-2 port calibration
5
[step3/4] (3) Vector Mixer Calibration
[step4/4] Connect Device and Measurement
Full 2 port calibration, which is required for the
Vector Mixer Calibration, will be executed with
this form.
Perform full 2 port calibration and press “Done”
button.
Then load the VBA macro
“MixerCharactarization.vba” in the “agilent”
directory under the User [D:] drive to obtain the
de-embedding file required for VMC.
Connect DUT, then press “Done” button to finish
the VBA macro.
6
Available measurement types, calibration method and measurement results
Following table describes available measurement types and calibration techniques with the VBA
wizard. Also, measurement result with each measurement type and calibration type is described
below.
Measurement Result
(a)ConversionlosswithPMC (b)ConversionlosswithSMC
7
(c)ConversionlosswithVMC (d)ConversionLossandGroupDelaywithVMC
(e) Conversion Compression(CW) with SMC (f) Conversion Compression (Swept) with SMC
8
Revision History
Revision Date Description
01.00 Mar 2008 Initial Revision
01.01 Apr 2008 Modified Power Meter Trigger Bug
Modified Frequency Range Check
01.10 Oct 2008 Supported 20GHz Option
Modified Scalar Mixer Calibration (Step 3/4 (2))
Modified Vector Mixer Calibration (Step 3/4 (3))
Other manuals for ENA Series
6
Table of contents
Other Agilent Technologies Measuring Instrument manuals
Agilent Technologies
Agilent Technologies PNA Series User manual
Agilent Technologies
Agilent Technologies PSA Series Installation and operation manual
Agilent Technologies
Agilent Technologies 4418B User manual
Agilent Technologies
Agilent Technologies 4395A User manual
Agilent Technologies
Agilent Technologies 4294A User manual
Agilent Technologies
Agilent Technologies E4418B User manual
Agilent Technologies
Agilent Technologies N9340B Manual
Agilent Technologies
Agilent Technologies Varian MERCURY Series Technical manual
Agilent Technologies
Agilent Technologies B1500A User manual
Agilent Technologies
Agilent Technologies 8753ES User manual
Agilent Technologies
Agilent Technologies N1911A User manual
Agilent Technologies
Agilent Technologies 3588A User manual
Agilent Technologies
Agilent Technologies Agilent 4396B User manual
Agilent Technologies
Agilent Technologies G8610A User manual
Agilent Technologies
Agilent Technologies 4349B User manual
Agilent Technologies
Agilent Technologies 8510C User manual
Agilent Technologies
Agilent Technologies Cary Eclipse User manual
Agilent Technologies
Agilent Technologies N5242A User manual
Agilent Technologies
Agilent Technologies PSA Series User manual
Agilent Technologies
Agilent Technologies U4154A User manual
