AEMC instruments Digital FlexProbes 400D-10 User manual

WITH AEMC

INSTRUMENTS

DIGITAL FLEXPROBE®

Digital FlexProbes®

ENGLISH

User Manual

Models: 400D-10

400D-14

400D-24

4000D-14

4000D-24

No part of this documentation may be reproduced in any form or by any means (including electronic

storage and retrieval or translation into any other language) without prior agreement and written consent

from Chauvin Arnoux®, Inc., as governed by United States and International copyright laws.

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

15 Faraday Drive • Dover, NH 03820 USA

Tel: (800) 945-2362 or (603) 749-6434 • Fax: (603) 742-2346

This documentation is provided “as is,” without warranty of any kind, express, implied, or otherwise.

Chauvin Arnoux®, Inc. has made every reasonable e󰀨ort to ensure that this documentation is accurate;

but does not warrant the accuracy or completeness of the text, graphics, or other information contained

in this documentation. Chauvin Arnoux®, Inc. shall not be liable for any damages, special, indirect,

incidental, or inconsequential; including (but not limited to) physical, emotional or monetary damages

due to lost revenues or lost prots that may result from the use of this documentation, whether or not the

user of the documentation has been advised of the possibility of such damages.

Chauvin Arnoux®, Inc.

d.b.a AEMC®Instruments

www.aemc.com

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments

certies that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met the instrument’s published

specications.

An NIST traceable certicate may be requested

at the time of purchase, or obtained by returning

the instrument to our repair and calibration

facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair and

calibration section at www.aemc.com/calibration.

Serial #:

Catalog #:

Model #:

Please ll in the appropriate date as indicated:

Date Received:

Date Calibration Due:

TABLE OF CONTENTS

1. INTRODUCTION..................................................................6

1.1 PRECAUTIONS BEFORE USE................................................. 6

1.2 INTERNATIONAL ELECTRICAL SYMBOLS........................... 6

1.3 DEFINITION OF MEASUREMENT CATEGORIES (CAT) ...... 7

1.4 RECEIVING YOUR SHIPMENT................................................ 7

1.5 ORDERING INFORMATION..................................................... 7

1.5.1 Accessories ........................................................................ 7

2. PRODUCT FEATURES.......................................................8

2.1 DESCRIPTION ........................................................................... 8

2.2 CONTROL FEATURES ............................................................. 9

3. OPERATION ...................................................................... 11

3.1 MEASUREMENT PRINCIPLE ................................................ 11

3.2 USE ........................................................................................... 11

3.2.1 Connection ....................................................................... 11

3.2.2 Measurement ................................................................... 11

3.2.3 Freezing the Measurement .............................................. 12

3.2.4 Search for Maximum ....................................................... 12

3.2.5 Auto Power OFF............................................................... 12

3.2.6 Low Battery ...................................................................... 13

3.2.7 Disconnecting................................................................... 13

4. SPECIFICATIONS ............................................................. 14

4.1 REFERENCE CONDITIONS................................................... 14

4.2 ELECTRICAL............................................................................ 14

4.2.1 Model 400D-10 / 400D-24 ................................................ 14

4.2.2 Model 4000D-14 / 4000D-24 ........................................... 14

4.3 VARIATIONS IN RANGE OF USE ......................................... 15

4.4 TYPICAL FREQUENCY RESPONSE CURVES ................... 16

4.5 POWER SUPPLY ..................................................................... 16

4.6 ENVIRONMENTAL .................................................................. 16

4.7 MECHANICAL .......................................................................... 17

4.8 SAFETY .................................................................................... 17

4.9 ELECTROMAGNETIC COMPATIBILITY ............................... 17

5. MAINTENANCE ................................................................ 18

5.1 CLEANING................................................................................ 18

5.2 REPLACING THE BATTERIES .............................................. 18

5.3 REPAIR AND CALIBRATION ................................................. 19

5.4 TECHNICAL AND SALES ASSISTANCE .............................. 19

5.5 LIMITED WARRANTY............................................................. 20

5.5.1 Warranty Repairs.............................................................. 20

6 Digital FlexProbe®Models 400D & 4000D - User Manual

1. INTRODUCTION

Thank you for purchasing an AEMC®Instruments Digital FlexProbe®.

For the best results from your instrument and for your safety, you must read the

enclosed operating instructions carefully and comply with the precautions for use.

Only qualied and trained operators should use this product.

1.1 PRECAUTIONS BEFORE USE

This instrument is protected against voltages of not more than 1000 V with

respect to ground in measurement CAT III or 600 V in CAT IV between the

sensor and the conductor that measures the current.

The protection provided by the instrument may be impaired if the instrument is

used other than as specied by the manufacturer.

■Comply with the rated maximum voltage and current, and the

measurement category.

■Observe the conditions of use; temperature, relative humidity, altitude,

level of pollution, and location.

■Before each use, check the integrity of the insulation on the sensor,

cable and housing. Do not use the instrument if it is open, damaged,

poorly assembled, or if its accessories appear damaged.

■The sensor must not be applied to or removed from uninsulated

conductors at dangerous voltages.

■Use personal protection equipment systematically.

■All troubleshooting and metrological checks must be performed by

competent and accredited personnel.

1.2 INTERNATIONAL ELECTRICAL SYMBOLS

Signies that the instrument is protected by double or reinforced insulation

CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol

is present, the operator must refer to the user manual before operation

Indicates a risk of electric shock. The voltage at the parts marked with this

symbol may be dangerous

Indicates Important information to acknowledge

This product complies with the Low Voltage & Electromagnetic Compatibility

European directives

Battery

In the European Union, this product is subject to a separate collection

system for recycling electrical and electronic components in accordance with

directive WEEE 2012/19/EU

Digital FlexProbe®Models 400D & 4000D - User Manual 7

1.3 DEFINITION OF MEASUREMENT CATEGORIES (CAT)

CAT IV: Corresponds to measurements performed at the primary electrical

supply (< 1000 V).

Example: primary overcurrent protection devices, ripple control units,

and meters.

CAT III: Corresponds to measurements performed in the building installation

at the distribution level.

Example: hardwired equipment in xed installation and circuit

breakers.

CAT II: Corresponds to measurements performed on circuits directly

connected to the electrical distribution system.

Example: measurements on household appliances and portable

tools.

1.4 RECEIVING YOUR SHIPMENT

Upon receiving your shipment, make sure that the contents are consistent with

the packing list. Notify your distributor of any missing items. If the equipment

appears to be damaged, le a claim immediately with the carrier and notify

your distributor at once, giving a detailed description of any damage. Save the

damaged packing container to substantiate your claim.

1.5 ORDERING INFORMATION

All models include one Digital FlexProbe®, (2) AAA batteries and a user manual.

Digital FlexProbe®(MiniFlex®) Model 400D-10 w/ 6 ft Lead

(TRMS, 4 AAC, 40 AAC, 400 AAC)...................................................... Cat. #2153.31

Digital FlexProbe®(MiniFlex®) Model 400D-24 w/ 6 ft Lead

(TRMS, 4 AAC, 40 AAC, 400 AAC)......................................................Cat. #2153.36

Digital FlexProbe®(MiniFlex®) Model 4000D-14 w/ 6 ft Lead

(TRMS, 40 AAC, 400 AAC, 4000 AAC)................................................Cat. #2153.32

Digital FlexProbe®(MiniFlex®) Model 4000D-24 w/ 6 ft Lead

(TRMS, 40 AAC, 400 AAC, 4000 AAC)................................................Cat. #2153.35

1.5.1 Accessories

Multix Multi-Position Magnetic Mounting Accessory .....................Cat. #5000.44

Soft Carrying Case........................................................................... Cat. #2118.65

Small Classic Tool Bag .................................................................... Cat. #2133.72

Order Accessories and Replacement Parts Directly Online

Check our Storefront at www.aemc.com/store for availability

8 Digital FlexProbe®Models 400D & 4000D - User Manual

2. PRODUCT FEATURES

2.1 DESCRIPTION

An ideal addition to the electrician’s tool kit, the Digital FlexProbe®series can be

used for TRMS AC current measurements from 20 mA to 4000 A, and are rated

600 V CAT IV. They provide a welcomed solution when accessing electrical

conductors is di󰀩cult and in tight places.

Two models are available. The Model 400D, available with a 10 in, or 24 in

sensor, has a measurement range starting at 20 mA, and is designed for work in

residential, commercial and light industrial applications. It can be used to check

electrical distribution systems up to 400 A.

The Model 4000D, available with a either a 14 in or 24 in sensor, has a

measurement range starting at 100mA and can be used on higher-power

industrial installations, as well as electrical utilities for measurements up to

4000 A.

Although they are high-performance instruments, the Digital FlexProbe®Series

are very simple to use: two buttons are all it takes to start the instrument,

deactivate the auto power-o󰀨, HOLD the value on the display or store the

maximum value (MAX HOLD). The values are read directly on the built-in

4000-count display.

They are ergonomically designed for comfortable handheld use even when bulky

gloves are required. The optional articulating, magnetic Multix mounting system

accessory makes it simple to hang on a wall, door, table edge or clip onto a belt.

Digital FlexProbe®Models 400D & 4000D - User Manual 9

2.2 CONTROL FEATURES

1. Flexible sensor

- Model 400D (10 in, 24 in)

- Model 4000D (14 in, 24 in)

2. Sensor opening/closing lever

3. Shielded lead

4. Protective housing

5. LCD display

6. ON/OFF button

7. HOLD button

MAX

(>2s)

HOLD

4000 A

MAX

HOLD

Digital

FlexProbe®

MODEL 400

TRMS CURRENT METER

10 Digital FlexProbe®Models 400D & 4000D - User Manual

On the back of the protective housing is a notch for the attachment of a belt clip

(optional).

With the Multix magnetic mounting accessory (Cat #5000.44), you can position

your Digital FlexProbe®anywhere, leaving both hands free.

The Multix can be used to:

■Carry the Digital FlexProbe®on a belt

■Attach it to a metal surface using the built-in magnet

■Attach it to a door top or the edge of a table

MiniFlex®Shown

This manual suits for next models

Table of contents

Other AEMC instruments Measuring Instrument manuals

AEMC instruments

AEMC instruments Chauvin Arnoux 6412 User manual

AEMC instruments

AEMC instruments AmpFlex 193-24-BK User manual

AEMC instruments

AEMC instruments JM852 User manual

AEMC instruments

AEMC instruments PEL 105 User manual

AEMC instruments

AEMC instruments 6501 User manual

AEMC instruments

AEMC instruments 1035 User manual

AEMC instruments

AEMC instruments MN375 User manual

AEMC instruments

AEMC instruments 6526 User manual

AEMC instruments

AEMC instruments CM605 User manual

AEMC instruments

AEMC instruments MR6292 User manual

AEMC instruments

AEMC instruments SR601 User manual

AEMC instruments

AEMC instruments Clamp-On 3705 User manual

AEMC instruments

AEMC instruments 6550 User manual

AEMC instruments

AEMC instruments 502 User manual

AEMC instruments

AEMC instruments 403 User manual

AEMC instruments

AEMC instruments MN379T User manual

AEMC instruments

AEMC instruments 6550 User manual

AEMC instruments

AEMC instruments 6536 User manual

AEMC instruments

AEMC instruments 407 User manual

AEMC instruments

AEMC instruments MN134 User manual

AEMC instruments

AEMC instruments MN125 User manual

AEMC instruments

AEMC instruments 6527 User manual

AEMC instruments

AEMC instruments Simple Logger AmpFlex AL24-2500 User manual

AEMC instruments

AEMC instruments OX5042 User manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Endress+Hauser

Endress+Hauser Deltabar FMD71 technical information

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Endress+Hauser

Endress+Hauser Proline Promag 50 Brief operating instructions

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual